2132271831

10 9 7 8 5 6 4 3 2 1 NOTE 1. 端子テール部およびネイルの平坦度: 0.1mm MAX TAIL AND NAIL COPLANARITY TO BE 0.1mm MAX 2 (極数/2) = 偶数 に適用 APPLY FOR (CIRCUIT SIZE/2) = EVEN. 3 関連製品・書類はSHEET5を参照ください 　 REFER TO SHEET 5 ABOUT RELATED PRODUCTS AND DOCUMENTS. F A ±0.25 (B) 1 4　オーダー番号(製品番号): SHEET 6の製品一覧を参照ください ORDER No. (PRODUCT No.)：REFER TO SHEET 6 FOR PRODUCT LIST. (8.80) (0.05) NAIL AND TAIL 部品 PART 材質 MATERIAL 0.1 0 ナチュラル　NATURAL 3 0.38 1 黒　BLACK 13.0 9.0 7 0.76 11.5 10.0 8.5 7.5 6.0 4.5 29.8 28.3 26.8 25.3 23.8 22.3 20.8 19.3 17.8 16.3 14.8 13.3 11.8 10.3 ハウジング ポリアミド(PA)　UL94V-0 色：SEE CHART HOUSING POLYAMIDE(PA) UL94V-0 COLOR : SEE CHART B A 5 色　　　 COLOR 極数 CIRCUIT SIZE 08～34 コンタクト部 ターミナル CONTACT AREA TERMINAL テール部 TAIL AREA 金めっき厚　　　　　　　　 GOLD PLATING THICKNESS GOLD THK No. [micro-meter] No. COLOR 4 3 金めっき：製品一覧参照 GOLD PLATING：SEE PRODUCT LIST D 無光沢錫めっき：1.0 micro-meter MIN MATTE TIN PLATING：1.0 micro-meter MIN 下地めっき(全面) UNDER PLATING (WHOLE SURFACE) ネイル NAIL ニッケルめっき：2.0 micro-meters MIN NICKEL PLATING ：2.0 micro-meters MIN DOCUMENT STATUS 無光沢錫めっき　： 1.0 micro-meter MIN MATTE TIN PLATING P1 RELEASE DATE 9 2020/09/28 DIMENSION UNITS SCALE mm NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:48:51 8 7 ±0.25 ±0.2 C 34 32 30 28 26 24 22 20 18 16 14 12 10 8 極数 CKT NO C B CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき(下地)：1.0 micro-meter MIN NICKEL PLATING (UNDER PLATING) FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 24.0 22.5 21.0 19.5 18.0 16.5 15.0 13.5 12.0 10.5 D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 黄銅 BRASS ④ TAIL SOLDERING AREA 1 28.0 26.5 25.0 23.5 22.0 20.5 19.0 17.5 16.0 14.5 213227 ＊＊＊＊ CIRCUIT TAIL SOLDERING AREA NAIL SOLDERING AREA 銅合金 COPPER ALLOY ② ③ A (0.30) 2 PITCH C B NAIL SOLDERING AREA (4.00) 4 (1.40) TAIL CIRCUIT 1 (1.50) シリーズ番号 SERIES NO ① CAV.&MOLD MARK TRADE MARK (1.40) CIRCUIT (N-1) TAPE 9.50 NAIL (0.25) C 番号 NO 3 E TAIL (0.85) D CIRCUIT 2 TAPE (0.05) 9.15 E D ±0.40 TALE (0.85) CIRCUIT N F 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT VT TYPE GOLD PLATING EC NO: 645965 DRWN: HHUSSIN CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/09/09 2020/09/25 2020/09/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213227 3 2132270000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 C SHEET NUMBER 1 OF 6 1 A 10 9 7 8 5 6 4 3 2 1 F F (A) CONNECTOR CIRCUIT 2 B ±0.05 コネクタ外形 CONNECTOR OUTLINE (0.95) 0.80 MIN 1.60 CIRCUIT N 2.10 E 1.24 2.60 2.05 ±0.10 6.95 ±0.05 5.05 ±0.10 E D 2.45 ±0.10 1.50 ±0.05 (0.75) D 1.80 ±0.10 2 0.45 2.60 (PITCH) 2.53 ±0.05 CIRCUIT (N-1) 基板パターンレイアウト(参考) CIRCUIT 1 パターン非推奨エリア RECCOMENDED PCB PATTERN LAYOUT (REF.) パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECCOMENDED ON THE HATCHED AREA. PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHED AREA. (参考：メタルマスク厚さ　0.10mm, マスク開口率100%) (REFERENCE: METAL MASK THICKNESS 0.10MM, APERTURE RATIO 100%) C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/09/28 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:48:51 8 ANGULAR TOL 7 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT VT TYPE GOLD PLATING EC NO: 645965 DRWN: HHUSSIN CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/09/09 2020/09/25 2020/09/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213227 3 2132270000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 C SHEET NUMBER 2 OF 6 1 A 10 9 7 8 (9.20) 6 5 4 3 2 1 (0.85) 嵌合相手：503149シリーズ F F (11.20) MATE WITH: 503149 SERIES (0.85) E E 嵌合図 MATED CONNECTORS D D C C 8-10極 12-18極 8-10 CKT 12-18 CKT 20-28極 30-34極 20-28 CKT 30-34 CKT B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 極数別ハウジング形状 A DOCUMENT STATUS P1 RELEASE DATE 9 2020/09/28 NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:48:51 8 SCALE mm 7 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) HOUSING SHAPE OF EACH CKTS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 DIMENSION UNITS 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT VT TYPE GOLD PLATING EC NO: 645965 DRWN: HHUSSIN CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/09/09 2020/09/25 2020/09/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213227 3 2132270000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 C SHEET NUMBER 3 OF 6 1 A 9 7 8 引き出し方向 5 6 4 3 2 1.5 +0.10 0 6 REEL 引き出し方向 PULL OUT DIRECTION (1.70) 10 PULL OUT DIRECTION F 1 44mm幅テープ TAPE WIDTH : 44mm (R 0.75) F 32mm幅テープ ⌀380±2 TAPE WIDTH : 32mm 24mm幅テープ TAPE WIDTH : 24mm 5 トップテープ コネクタ E CONNECTOR (G) DETAIL P H ±1.00 J ±1.00 EMBOSSED TAPE NOTE 5．梱包数量　：　450個／リール 　　NUMBER OF CONNECTORS : 450 PIECES/REEL 6．リードテープ長さ 　　LEAD TAPE LENGTH (20) 1.75 ±0.10 4 エンボステープ D D ⌀ 1.5 +0.10 0 34 (⌀10) 32 30 (12 トップテープ接着部（空エンボス） 20 PIECES MIN. (22) 0°) TOP TAPE BONDED PART(EMPTY) C 4±0.1 （累積ピッチ：40±0.2） CENTER OF CONNECTOR E F ±0.10 E TOP TAPE 引き出し方向 28 45.4 49.4 20.2 44±0.3 40.4 26 22 PULL OUT DIRECTION 部品挿入部 COMPONENT SUPPLIER 20 末端部（空部） 100MIN. (⌀ 21) TAIL PART (EMPTY) 18 (2) 400 MIN. 16 37.4 ④ A ⑤ ⑥ 材質 MATERIAL DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 ポリスチレン　(リサイクル材を含む) POLYSTYLENE　(CONTAINED RECYCLED MATERIAL) P1 RELEASE DATE 9 2020/09/28 14 29.4 25.4 11.5 - J H G F 10 24 +0.3 -0.1 B 8 エンボステープ幅E WIDTH OF TAPE CKT NO. DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ポリエチレン、ポリエチレンテレフタレート POLYETHYLENE (PE), POLYETHYLENE TELEPHTHALATE(PET) リール REEL 32±0.3 28.4 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ポリスチレン(PS) エンボステープ EMBOSSED TAPE POLYSTYLENE トップテープ TOP TAPE 14.2 12 TOP TAPE PEELING OFF FORCE IS DIFINED BY JIS C0806-3 8. 本製品は乾燥剤入り、ハイバリア梱包である 　 THIS PRODUCT IS DELIVERED IN HIGH BARRIER PACKAGE WITH DESICCANT. 番号 部品 No. PART 33.4 DETAIL P 7. トップテープの剥離強度はJIS C0806-3に準拠 B C 24 7 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:48:51 8 ANGULAR TOL 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT VT TYPE GOLD PLATING EC NO: 645965 DRWN: HHUSSIN CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/09/09 2020/09/25 2020/09/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213227 3 2132270000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 C SHEET NUMBER 4 OF 6 1 A 10 9 8 7 5 6 4 3 2 1 F F 3 適用製品及び各種仕様書 APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 梱包仕様書 PACKAGING SPECIFICATION E 適用嵌合相手 MATE WITH PART NUMBER DOCUMENT NUMBER 213227 **** 2132279200-SPK 503149 **** 製品仕様書 PRODUCT SPECIFICATION D TERMINAL (GOLD PLATING) PLATING THK #24-28 HOUSING 製品番号 PRODUCT NUMBER E #28-30 0.1 micro-meters 213028 1*00 213029 1*00 0.38 micro-meters 213028 3*00 213029 3*00 0.76 micro-meters 213028 7*00 213029 7*00 5031490002-PS/PS/000 アプリケーション仕様書 APPLICATION SPECIFICATION D AS-503149-001 C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/09/28 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:48:51 8 ANGULAR TOL 7 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT VT TYPE GOLD PLATING EC NO: 645965 DRWN: HHUSSIN CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/09/09 2020/09/25 2020/09/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213227 3 2132270000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 C SHEET NUMBER 5 OF 6 1 A 10 9 4 7 8 6 5 4 3 2 1 製品一覧 PRODUCTS LIST F E D F 黒　BLACK ナチュラル NATURAL 213227 3411 213227 3211 213227 3011 213227 2811 213227 2611 213227 2411 213227 2211 213227 2011 213227 1811 213227 1611 213227 1411 213227 1211 213227 1011 213227 0811 213227 3410 213227 3210 213227 3010 213227 2810 213227 2610 213227 2410 213227 2210 213227 2010 213227 1810 213227 1610 213227 1410 213227 1210 213227 1010 213227 0810 オーダー番号 ORDER No C B 黒　BLACK ナチュラル NATURAL 213227 3471 213227 3271 213227 3071 213227 2871 213227 2671 213227 2471 213227 2271 213227 2071 213227 1871 213227 1671 213227 1471 213227 1271 213227 1071 213227 0871 213227 3470 213227 3270 213227 3070 213227 2870 213227 2670 213227 2470 213227 2270 213227 2070 213227 1870 213227 1670 213227 1470 213227 1270 213227 1070 213227 0870 オーダー番号 ORDER No HOUSING COLOR 34 32 30 28 26 24 22 20 18 16 14 12 10 213227 **1* (GOLD PLATING THICKNESS: 0.1 micro-meters MIN) 8 極数 CKT 黒　BLACK ナチュラル NATURAL 213227 3431 213227 3231 213227 3031 213227 2831 213227 2631 213227 2431 213227 2231 213227 2031 213227 1831 213227 1631 213227 1431 213227 1231 213227 1031 213227 0831 213227 3430 213227 3230 213227 3030 213227 2830 213227 2630 213227 2430 213227 2230 213227 2030 213227 1830 213227 1630 213227 1430 213227 1230 213227 1030 213227 0830 MODEL NO DOCUMENT STATUS P1 RELEASE DATE 9 2020/09/28 213227 **3* (GOLD PLATING THICKNESS: 0.38 micro-meters MIN) E 8 D MODEL NO HOUSING COLOR 34 32 30 28 26 24 22 20 18 16 14 12 10 C 213227 **7* (GOLD PLATING THICKNESS: 0.76 micro-meters MIN. B 8 極数 CKT THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION MODEL NO DIMENSION UNITS SCALE mm NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) 04:48:51 8 34 32 30 28 26 24 22 20 18 16 14 12 10 極数 CKT オーダー番号 ORDER No A FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 HOUSING COLOR 6 5 4 CLIK-MATE 1.5 DUAL ROW SMT VT TYPE GOLD PLATING EC NO: 645965 DRWN: HHUSSIN CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/09/09 2020/09/25 2020/09/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/10/01 2019/11/20 DRAWING SERIES A3-SIZE 213227 3 2132270000-SD MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 C SHEET NUMBER 6 OF 6 1 A