2159310270

14 13 12 11 10 9 7 8 5 6 4 3 2 1 A ±0.3 H H �D � NOTES 　 1 材料及び仕上げ(めっき仕様)：TABLE 1参照 　 MATERIAL AND FINISHES : SEE TABLE 1 2. 製品仕様書：511630000-PS 000 　 PRODUCT SPECIFICATION:511630000-PS 000 3. 嵌合相手：51163 シリーズ 　MATES WITH:51163 SERIES 4. アプリケーション仕様書(コネクタ取扱い説明書)：2166940000-AS PS 000 　 APPLICATION SPECIFICATION(CONNECTOR MANUAL)：2166940000-AS PS 000 5 偶数極に適合 APPLY FOR EVEN CIRCUIT 6. GLOW WIRE TEST適合品 THIS PRODUCT IS GLOW WIRE TEST COMPATIBLE. 7. ターミナルとネイルの平坦度は0.15mm以下 TERMINAL AND NAIL COPLANARITY : 0.15mm MAXIMUM. 発注番号 ORDER NUMBER 8 �0.6� 7 0.3 CIRCUIT 1 INDICATOR MARK G 5 �1.25� �0.6� �2.5� � B� �C � F G F 極数 CIRCUIT SIZE 10.65 ±0.3 E �8.2� 10.25 ±0.3 215931 ** 7 * 番号 NO. ハウジングカラー HOUSING COLOR 0 ナチュラル(ベージュ) NATURAL(BEIGE) 1 黒 BLACK CIRCUIT N �0.4� 8 CIRCUIT 1 0.85 (TERMINAL) 1.05 (TERMINAL) D 6 6 6 6 6 6 6 6 6 6 6 6 5 2.5 1 ハウジング キャビティ番号 CAVITY No. HOUSING トレードマーク TRADE MARK C 3 ネイル 1 番号 部品 NO. PART B ① NAIL TABLE 1 2 ターミナル 材質 MATERIAL TERMINAL D DIMENSION UNITS SCALE mm NTS ANGULAR TOL ± 3.0 ° 黄銅 BRASS 4 PLACES ± 0.2 3 PLACES ± 0.2 錫めっき：1.0 MICROMETER MINIMUM MATTE TIN PLATING 2 PLACES ± 0.2 1 PLACE ± 0.2 ニッケルめっき(下地めっき) : 1.0 MICROMETER MINIMUM NICKEL PLATING (UNDER PLATING) 10:28:19 RELEASE DATE 2022/04/01 DOCUMENT STATUS P1 14 13 12 11 0 PLACES ± 0.2 ③ FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 35 32.5 30 27.5 25 22.5 20 17.5 15 12.5 10 7.5 5 2.5 42.1 39.6 37.1 34.6 32.1 29.6 27.1 24.6 22.1 19.6 17.1 14.6 12.1 9.6 2159311571 2159311471 2159311371 2159311271 2159311171 2159311071 2159310971 2159310871 2159310771 2159310671 2159310571 2159310471 2159310371 2159310271 D 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C B A C 極数 CIRCUIT SIZE 梱包形態：エンボス梱包 PACKAGING：EMBOSSED TAPE AND REEL B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき(下地めっき) : 1.0 MICROMETER MINIMUM NICKEL PLATING (UNDER PLATING) A 38.2 35.7 33.2 30.7 28.2 25.7 23.2 20.7 18.2 15.7 13.2 10.7 8.2 5.7 ハウジングカラー HOUSING COLOR THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ターミナル 錫めっき：1.0 MICROMETER MINIMUM TERMINAL MATTE TIN PLATING ネイル NAIL ナチュラル （ベージュ） NATURAL (BEIGE) 2159311570 2159311470 2159311370 2159311270 2159311170 2159311070 2159310970 2159310870 2159310770 2159310670 2159310570 2159310470 2159310370 2159310270 オーダー番号：ORDER NUMBER ハウジング ポリアミド(PA),ガラス充填,UL94 V-0,色：SHEET 1参照 HOUSING POLYAMIDE (PA),GLASS FILLED,UL94 V-0,COLOR:SEE SHEET 1 黄銅 BRASS ② 製品一覧 PRODUCT LIST 黒 BLACK 1.76 (NAIL) E EC NO: 701596 DRWN: RWATANABE01 CHK'D: AIDA APPR: SAKIYAMA INITIAL REVISION: DRWN: RWATANABE01 APPR: SAKIYAMA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 2021/10/18 2022/03/31 2022/04/01 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/10/18 2022/04/01 DRAWING SERIES A2-SIZE 215931 5 MINI-LOCK 2.5 SINGLE ROW HEADER ASSEMBLY SMT VT 4 2159310000-SD MATERIAL NUMBER SEE SHEET1 3 PSD 000 A SHEET NUMBER CUSTOMER GENERAL 2 1 OF 3 1 A 14 13 12 10 11 9 7 8 5 6 4 3 2 �8� (A) リテーナー RETAINER 51164**05 H 1 ハウジング HOUSING 51163**** H 4-15CIRCUIT 3CIRCUIT ロック形状図 LOCK CONFIGURATION �12.8� 2CIRCUIT G �15.64� G 嵌合高さ (MATING HEIGHT) ヘッダー アセンブリ HEADER ASSEMBLY 215931**0* F 1.4 ±0.05 �0.62� 2.65 ±0.05 OF (A)AND(B) C D �D � 1.35 ±0.05 回路番号 N CIRCUIT N �1.25� 2.5 ±0.05 PITCH 公差非累積 NON-ACCUMULATIVE 5 回路番号 1 CIRCUIT 1 製品輪郭線 PART OUTLINE 回路番号 2 CIRCUIT 2 (B) 吸着範囲 SUCTION AREA 推奨基板レイアウト RECOMMENDED PCB PATTERN LAYOUT B （参考：基板厚1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) (REFERENCE: PCB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) D RELEASE DATE 12 2022/04/01 10:28:19 11 DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 701596 DRWN: RWATANABE01 CHK'D: AIDA APPR: SAKIYAMA INITIAL REVISION: DRWN: RWATANABE01 APPR: SAKIYAMA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 極数 CIRCUIT SIZE B GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS P1 14 13 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION パターン非推奨エリア パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECOMMENDED ON THE HATCHING AREA PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHING AREA. FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 15 14 13 12 11 10 9 8 7 6 5 4 3 2 6 6 6 6 6 6 6 6 6 6 6 6 5 2.5 �2.72� 2.07 ±0.05 �0.26� 3 ±0.05 5.43 ±0.05 D DISTANCE FROM CONNECTOR OUTLINE TO PAD CIRCUIT No.1 �0.34� 2.25 ±0.05 (A) (CONNECTOR) E �0.05� E 嵌合状態図 MATED CONNECTORS 2.64 ±0.05 製品レイアウト PRODUCT LAYOUT DISTANCE FROM CONNECTOR OUTLINE TO PAD CIRCUIT No.1 F 9 8 7 6 2021/10/18 2022/03/31 2022/04/01 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/10/18 2022/04/01 DRAWING SERIES A2-SIZE 215931 5 MINI-LOCK 2.5 SINGLE ROW HEADER ASSEMBLY SMT VT 4 2159310000-SD MATERIAL NUMBER SEE SHEET1 3 PSD 000 A SHEET NUMBER CUSTOMER GENERAL 2 2 OF 3 1 A 14 13 12 10 11 引き出し方向 9 7 8 6 REEL 4 3 2 1 引き出し方向 PULL OUT DIRECTION H 5 6 H PULL OUT DIRECTION 送り穴とのずれ量 0.05 MAX (SKEW BETWEEN ROUND AND ELONGATED SPROCKET HOLE) 56mm幅テープ (TAPE WIDHT : 56mm) W ⌀ 380 ( ⌀ 80) ±2 �20� 44mm幅テープ (TAPE WIDHT : 44mm) G 32mm幅テープ (TAPE WIDHT : 32mm) "A" コネクタ 中心位置 CENTER OF CONNECTOR Z (⌀13) SECTION Z-Z Z 1.75 ±0.1 DETAIL "D" X 引き出し方向 �5.8� D �5.8� 36.4 33.9 31.4 28.9 26.4 23.9 21.4 18.9 16.4 13.9 11.4 8.9 6.4 3.9 J トップテープ接着部(空エンボス) TOP TAPE BONDED PART.(EMPTY) C トップテープリーダー部 TOP TAPE LEADER PART 部品挿入部 COMPONENT SUPPLIER 末端部 (空部) TAIL PART (EMPTY) . 1300 MINIMUM 400 MINIMUM A �3.65� 11. トップテープの剥離強度はIEC60286-3に準拠 　 TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3 12. 梱包仕様書：2159319200-SPK 200 　 PACKAGING SPECIFICATION: 2159319200-SPK 200 �7.3� SECTION X-X SECTION Y-Y ④ ⑤ トップテープ TOP TAPE 61.4 57.4 26.2 56 ±0.3 49.4 45.4 20.2 44 ±0.3 37.4 33.4 14.2 32 ±0.3 29.4 25.4 11.5 24 +0.3 -0.1 H J G 極数 CIRCUIT SIZE B E F C DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ポリエチレン(PE), その他 POLYETHYLENE(PE), ETC リール ポリスチレン(PS) ＜リサイクル材を含む＞ ⑥ REEL POLYSTYRENE(PS) ＜RECYCLE MATERIAL CONTAINED＞ 10:28:19 RELEASE DATE 2022/04/01 DOCUMENT STATUS P1 14 13 12 11 15 14 13 12 11 10 9 8 7 6 5 4 3 2 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 材質 MATERIAL ポリスチレン(PS) エンボステープ EMBOSSED TAPE POLYSTYRENE(PS) FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 E 11.6 ±0.3 100 MINIMUM PULL OUT DIRECTION 番号 部品 NO. PART DETAIL W ⌀ 1.5 +0.1 0 ACCUMULATIVE PITCH:40±0.2 4 累積ピッチ:40±0.2 9. 梱包数量： 350個／リール 　 NUMBER OF CONNECTORS : 350 PIECES/REEL. 10. リードテープ長さ 　 LEAD TAPE LENGTH. B R 0.75 ±0.1 エンボスポケット中心位置 �2� CENTER OF EMBOSSED POCKET NOTES D F Y 5 TOP TAPE 4 EMBOSSED TAPE X 1.5 +0.1 0 Y (⌀21) 24mm幅テープ (TAPE WIDHT : 24mm) 0.2 ±0.05 (22) �F� E (120 °) (2) 28.4 ±0.1 F CONNECTOR 40.4 ±0.1 H ±1.0 52.4 ±0.1 G ±1.0 (⌀10) E G ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 701596 DRWN: RWATANABE01 CHK'D: AIDA APPR: SAKIYAMA INITIAL REVISION: DRWN: RWATANABE01 APPR: SAKIYAMA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 2021/10/18 2022/03/31 2022/04/01 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/10/18 2022/04/01 DRAWING SERIES A2-SIZE 215931 5 MINI-LOCK 2.5 SINGLE ROW HEADER ASSEMBLY SMT VT 4 2159310000-SD MATERIAL NUMBER SEE SHEET1 3 PSD 000 A SHEET NUMBER CUSTOMER GENERAL 2 3 OF 3 1 A