2159320270

14 13 12 11 10 9 7 8 5 6 4 3 H NOTES �D� 　 1 材料及び仕上げ(めっき仕様)：TABLE 1参照 　 MATERIAL AND FINISHES : SEE TABLE 1 2. 製品仕様書：511630000-PS 000 　 PRODUCT SPECIFICATION:511630000-PS 000 3. 嵌合相手：51163 シリーズ 　MATES WITH:51163 SERIES 4. アプリケーション仕様書(コネクタ取扱い説明書)：2166940000-AS PS 000 　 APPLICATION SPECIFICATION(CONNECTOR MANUAL)：2166940000-AS PS 000 5 偶数極に適合 APPLY FOR EVEN CIRCUIT 6. GLOW WIRE TEST適合品 THIS PRODUCT IS GLOW WIRE TEST COMPATIBLE. 7. ターミナルとネイルの平坦度は0.15mm以下 TERMINAL AND NAIL COPLANARITY : 0.15mm MAXIMUM. 8 発注番号 ORDER NUMBER 7 0.3 CIRCUIT 1 INDICATOR MARK �0.6� G 5 �1.25� �2.5� �0.6� � B� �C� F 215932 ** 7 * 10.65 ±0.3 2.36 (NAIL) �8.2� 10.25 ±0.3 E 番号 NO. ハウジングカラー HOUSING COLOR 0 ナチュラル(ベージュ) NATURAL(BEIGE) 1 黒 BLACK �0.4� 1.46 (TERMINAL) 8 CIRCUIT N CIRCUIT 1 D 1 キャビティ番号 CAVITY No. ハウジング HOUSING 6 6 6 6 6 6 6 6 6 6 6 6 5 2.5 C 3 番号 部品 NO. PART ① TABLE 1 2 材質 MATERIAL ネイル NAIL ターミナル TERMINAL D DIMENSION UNITS SCALE mm NTS ANGULAR TOL ± 3.0 ° 黄銅 BRASS 4 PLACES ± 0.2 3 PLACES ± 0.2 錫めっき：1.0 MICROMETER MINIMUM MATTE TIN PLATING 2 PLACES ± 0.2 1 PLACE ± 0.2 ニッケルめっき(下地めっき) : 1.0 MICROMETER MINIMUM NICKEL PLATING (UNDER PLATING) 10:28:20 RELEASE DATE 2022/04/01 DOCUMENT STATUS P1 13 12 11 0 PLACES ± 0.2 FORMAT: tb-prod-A2 REVISION: J1 DATE: 2021/05/01 2159321571 2159321471 2159321371 2159321271 2159321171 2159321071 2159320971 2159320871 2159320771 2159320671 2159320571 2159320471 2159320371 2159320271 42.1 39.6 37.1 34.6 32.1 29.6 27.1 24.6 22.1 19.6 17.1 14.6 12.1 9.6 D 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C B A C 極数 CIRCUIT SIZE 梱包形態：エンボス梱包 PACKAGING：EMBOSSED TAPE AND REEL B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき(下地めっき) : 1.0 MICROMETER MINIMUM NICKEL PLATING (UNDER PLATING) ③ 35 32.5 30 27.5 25 22.5 20 17.5 15 12.5 10 7.5 5 2.5 ハウジングカラー HOUSING COLOR THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ターミナル 錫めっき：1.0 MICROMETER MINIMUM TERMINAL MATTE TIN PLATING ネイル NAIL ナチュラル （ベージュ） NATURAL (BEIGE) 2159321570 2159321470 2159321370 2159321270 2159321170 2159321070 2159320970 2159320870 2159320770 2159320670 2159320570 2159320470 2159320370 2159320270 オーダー番号：ORDER NUMBER ハウジング ポリアミド(PA),ガラス充填,UL94 V-0,色：SHEET 1参照 HOUSING POLYAMIDE (PA),GLASS FILLED,UL94 V-0,COLOR:SEE SHEET 1 黄銅 BRASS ② 38.2 35.7 33.2 30.7 28.2 25.7 23.2 20.7 18.2 15.7 13.2 10.7 8.2 5.7 E 製品一覧 PRODUCT LIST 黒 BLACK トレードマーク TRADE MARK 1 G F 極数 CIRCUIT SIZE A 1 A ±0.3 H B 2 EC NO: 701596 DRWN: RWATANABE01 CHK'D: AIDA APPR: SAKIYAMA INITIAL REVISION: DRWN: RWATANABE01 APPR: SAKIYAMA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 2021/11/11 2022/03/31 2022/04/01 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/11/11 2022/04/01 DRAWING SERIES A2-SIZE 215932 5 MINI-LOCK 2.5 SINGLE ROW HEADER ASSEMBLY SMT RA 4 2159320000-SD MATERIAL NUMBER SEE SHEET1 3 PSD 000 A SHEET NUMBER CUSTOMER GENERAL 2 1 OF 3 1 A 14 13 12 11 10 9 7 8 5 6 4 3 2 1 H H ヘッダー アセンブリ HEADER ASSEMBLY 215932**0* ハウジング HOUSING 51163**** G G 2CIRCUIT �A� 4-15CIRCUIT 3CIRCUIT リテーナー RETAINER 51164**05 �15.64� F �8� 嵌合高さ (MATING HEIGHT) ロック形状図 LOCK CONFIGURATION F �12.8� 嵌合状態図 MATED CONNECTORS �1.25� �0.62� OF 回路番号 1 CIRCUIT 1 (A)AND(B) �0.68� �5.35� 1.35 ±0.05 回路番号 2 CIRCUIT 2 3.92 ±0.05 C 回路番号 N CIRCUIT N 5.17 ±0.05 2.38 ±0.05 D E �E� �1.65� 2.5 ±0.05 PITCH 公差非累積 NON-ACCUMULATIVE 2.65 ±0.05 �E� DISTANCE FROM CONNECTOR OUTLINE TO NAIL PAD (B) �2.61� (A) �2.91� 製品レイアウト PRODUCT LAYOUT DISTANCE FROM CONNECTOR OUTLINE TO PAD CIRCUIT No.1 E D 2CIRCUIT 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 3.4 2.9 3-15CIRCUIT 吸着範囲 SUCTION AREA 1.4 ±0.05 E 製品輪郭線 PART OUTLINE B パターン非推奨エリア パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECOMMENDED ON THE HATCHING AREA PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHING AREA. DOCUMENT STATUS P1 13 RELEASE DATE 12 2022/04/01 10:28:20 11 DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 701596 DRWN: RWATANABE01 CHK'D: AIDA APPR: SAKIYAMA INITIAL REVISION: DRWN: RWATANABE01 APPR: SAKIYAMA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 極数 CIRCUIT SIZE B GENERAL TOLERANCES (UNLESS SPECIFIED) （参考：基板厚1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) (REFERENCE: PCB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 推奨基板レイアウト RECOMMENDED PCB PATTERN LAYOUT A 15 14 13 12 11 10 9 8 7 6 5 4 3 2 9 8 7 6 2021/11/11 2022/03/31 2022/04/01 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/11/11 2022/04/01 DRAWING SERIES A2-SIZE 215932 5 MINI-LOCK 2.5 SINGLE ROW HEADER ASSEMBLY SMT RA 4 2159320000-SD MATERIAL NUMBER SEE SHEET1 3 PSD 000 A SHEET NUMBER CUSTOMER GENERAL 2 2 OF 3 1 A 14 13 12 10 11 引き出し方向 6 9 7 8 5 6 3 2 1 REEL PULL OUT DIRECTION H 4 送り穴とのずれ量 0.05 MAX 引き出し方向 H (SKEW BETWEEN ROUND AND ELONGATED SPROCKET HOLE) PULL OUT DIRECTION 56mm幅テープ (TAPE WIDHT : 56mm) W ⌀ 380 ± 2 ( ⌀ 80) �20� 44mm幅テープ (TAPE WIDHT : 44mm) G G (22) 24mm幅テープ (TAPE WIDHT : 24mm) Z X Y E 5 TOP TAPE (⌀13) 4 DETAIL "D" EMBOSSED TAPE 1.75 ±0.1 (⌀21) Y ⌀ 1.5 +0.1 0 X Z SECTION Z-Z E 14.95 ±0.3 �7.475� D �7.475� 36.4 33.9 31.4 28.9 26.4 23.9 21.4 18.9 16.4 13.9 11.4 8.9 6.4 3.9 100 MINIMUM 引き出し方向 PULL OUT DIRECTION トップテープリーダー部 TOP TAPE LEADER PART 部品挿入部 COMPONENT SUPPLIER 400 MINIMUM K トップテープ接着部(空エンボス) TOP TAPE BONDED PART.(EMPTY) C 末端部 (空部) TAIL PART (EMPTY) 1140 MINIMUM . �5.325� �10.65� 11. トップテープの剥離強度はIEC60286-3に準拠 　 TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3 12. 梱包仕様書：2159329200-SPK 200 　 PACKAGING SPECIFICATION: 2159329200-SPK 200 番号 部品 NO. PART A SECTION Y-Y ④ ⑤ トップテープ TOP TAPE ±0.3 49.4 45.4 20.2 44 ±0.3 37.4 33.4 14.2 32 ±0.3 29.4 25.4 11.5 24 +0.3 -0.1 J K H 極数 CIRCUIT SIZE B F G C DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) SECTION X-X ポリエチレン(PE), その他 POLYETHYLENE(PE), ETC リール ポリスチレン(PS) ＜リサイクル材を含む＞ ⑥ REEL POLYSTYRENE(PS) ＜RECYCLE MATERIAL CONTAINED＞ 10:28:20 RELEASE DATE 2022/04/01 DOCUMENT STATUS P1 13 12 11 61.4 57.4 26.2 56 15 14 13 12 11 10 9 8 7 6 5 4 3 2 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 材質 MATERIAL ポリスチレン(PS) エンボステープ EMBOSSED TAPE POLYSTYRENE(PS) FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 DETAIL W ACCUMULATIVE PITCH:40±0.2 4 累積ピッチ:40±0.2 9. 梱包数量： 440個／リール 　 NUMBER OF CONNECTORS : 440 PIECES/REEL. 10. リードテープ長さ 　 LEAD TAPE LENGTH. B F R 0.75 ±0.1 エンボスポケット中心位置 �2� CENTER OF EMBOSSED POCKET NOTES D 1.5 +0.1 0 0.2 ±0.05 (120 °) (2) コネクタ 中心位置 CENTER OF CONNECTOR F �G� J ±1.0 28.4 ±0.1 (⌀10) F CONNECTOR 40.4 ±0.1 H ±1.0 "A" 52.4 ±0.1 32mm幅テープ (TAPE WIDHT : 32mm) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 701596 DRWN: RWATANABE01 CHK'D: AIDA APPR: SAKIYAMA INITIAL REVISION: DRWN: RWATANABE01 APPR: SAKIYAMA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 2021/11/11 2022/03/31 2022/04/01 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/11/11 2022/04/01 DRAWING SERIES A2-SIZE 215932 5 MINI-LOCK 2.5 SINGLE ROW HEADER ASSEMBLY SMT RA 4 2159320000-SD MATERIAL NUMBER SEE SHEET1 3 PSD 000 A SHEET NUMBER CUSTOMER GENERAL 2 3 OF 3 1 A