2227-2041

12 4 5 6 7 8 G 9 10 11 12 13 F 14 15 16 ( 2.54 .200 ( 7.62 .300 ( 10.16 .400 ( 12.70 .500 ( 15.24 .600 ( 17.78 .700 ( 20.32 .800 ( 22.86 .900 ( 25.40 1.000 ( 27.94 1.100 ( 30.48 1.200 ( 33.02 1.300 ( 35.56 1.400 ( 38.10 1.500 ( 40.64 1.600 .100 ( 5.08 .200 ( 7.62 .300 ( 10.16 .400 ( 12.70 .500 ( 15.24 .600 ( 17.78 .700 ( 20.32 .800 ( 22.86 .900 ( 25.40 1.000 ( 27.94 1.100 ( 30.48 1.200 ( 33.02 1.300 ( 35.56 1.400 ( 38.10 1.500 ) ) ) ) ) ) ) ) ) ) ) ) ) 3 2 1 DIMN. "B" ( 5.08 ) ) 4 ) A REF. ) 1.27 .050 ) 1.88 .074 B± (0.30)/.012 AT DATUM E ) 2.54 .100 ) 0.53 .021 SEE NOTE 6 0.51/.020 E H 1.00 .039 TIPS ONLY ) ) ) ) E ) ) ) ) D± 0.51/.020 3 5 6 F H 7 8 C± 0.38/.015 2 9 ) ) 0.38/.015 E F T TIN TIPS ONLY WAFER MATERIAL G G GOLD 3.17 REF. .125 DIMN. "A" 10 11.7 .46 NO. OF CCTS 11 5.8 .23 CIRCUIT NO. 1 SEE NOTE 11 SEE NOTE 1 OPTIONAL VOIDED CIRCUIT SEE CHART FOR LOCATION E (0.64)/.025 SQ. PIN BRASS NOTES: 1. WAFER MATERIAL: NYLON, UL94V-0, PIN MATERIAL: BRASS 2. FINISH: 154 = OVERALL TIN: 0.00254/.00100 MIN. OVER 0.00127/.000050 MIN. NICKEL 197 = OVERALL REFLOWED MATTE TIN: 0.00152/.00060 MIN. OVER 0.00127/.000050 MIN. NICKEL 222 = OVERALL MATTE TIN: 0.00254/.00100 MIN. OVER 0.00127/.000050 MIN NICKEL 228 = SELECT GOLD 0.00076/.000030 MIN., SELECT MATTE TIN: 0.00254/.00100 OVER 0.00127/.000050 MIN NICKEL 231 = SELECT GOLD 0.00127/.000050 MIN., SELECT MATTE TIN: 0.00254/.00100 OVER 0.00076/.000030 MIN NICKEL 241 = SELECT GOLD 0.00051/.000020 MIN., SELECT MATTE TIN: 0.00254/.00100 OVER 0.00076/.000030 MIN NICKEL 3. THIS PART CONFORMS TO MOLEX PROD. SPEC. PS-99020-0088. 4. PACKAGING: PER PK-6410-002 5. PIN SOLDERABILITY PER MOLEX SPEC. SMES-152. 6. SINGLE RAMP ON 2-6 CCTS TWO RAMPS ON 7-16 CCTS, AS SHOWN. 7. PIN PUSH OUT FORCE: (0.907 Kg)/2lbs MIN. 8. PCB THICKNESS 1.6MM 9. WAFERS STACKABLE END TO END WITH (2.54)/.100 BETWEEN END PINS 10. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 11. CIRCUIT 1 DESIGNATION IS USED TO DEFINE VOID LOCATION. CIRCUIT 1 MAY OR MAY NOT LINE UP WITH CIRCUIT 1 ON THE MATING HOUSING. AE-6410- N * (*) - * D VOIDED CIRCUIT CODE NO. CORRESPONDS TO CIRCUIT NO. VOIDED. MULTIPLE VOIDS START WITH 51 BLANK = NONE NO. OF CCTS WAFER ASSY. PLATING TYPE OPTION C 2.54 ±0.05 .100 ±.002 ⌀ 1.19 ±0.05 .047 ±.002 TYP E SEE NOTE 6 TYP NON-ACCUM. D C B B FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 RELEASE DATE 11 14.06.2016 0 = 0 C 16:45:46 10 9 8 7 6 0 = 0 = 0 = 0 BC1 5 REV P1 = = EM-6410-010 EM-6410-12A EM-6410-12C RELEASE STATUS 0 104930 MKIPPER JDFOX FSMITH A = EC NO: DRWN: CHK'D: APPR: (STANDARD SERIES) 0 ADD 46999-0696 RECOMMENDED P.C.B. HOLE DIMENSIONS = 2016/01/21 2016/05/31 2016/06/14 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM 5:1 DRWN BY DATE 28/01/03 4 PLACES ± ± T. MAHON 3 PLACES ± ± 0.01 CHK'D BY 2 PLACES ± 0.25 ± 0.014 BMAGUIRE 1 PLACES ± 0.35 ± APPR BY 0 PLACES ± ± DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 28/01/03 DATE JDENNEHY ANGULAR TOL ± 0.5 WAFER, FRICTION LOCK KK (2.54)/.100 FOR (0.64)/.025 SQ. PINS DATE PRODUCT CUSTOMER DRAWING 2005/03/11 THIRD ANGLE PROJECTION C SERIES MATERIAL NUMBER 6410 SEE CHART GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER SDAE-6410-N 3 CUSTOMER 2 PSD 1 OF 4 000 1 A 12 11 10 9 7 8 5 6 4 3 2 1 H H G G AE-6410-NA ENG. NO. ( 197 ) AE-6410-NH (7.14) .281 ( 197 ) ( 197 ) AE-6410-NJ (7.49) .295 ( 154 ) AE-6410-NL (18.80) .740 AE-6410-NM (8.58) .338 ( 154 ) (7.62) .300 DIMN. "C" (14.22)/.560 (20.32)/.800 (14.98)/.590 (25.40)/1.000 (23.88)/.940 (20.32)/.800 DIMN. "F" (3.56)/.140 REF (10.00)/.394 REF (4.32)/.170 REF (3.43)/.135 REF (12.13).477 REF (9.53)/.375 REF DIMN. "G" N/A N/A N/A N/A N/A N/A DIMN. "T" OVERALL OVERALL OVERALL OVERALL OVERALL OVERALL 222 PLATING NO. OF CIRCUITS E D AE-6410-NC (7.50) .295 DIMN. "D" F ( 222 ) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 AE-64102A(222) 3 4 5 6 7 8 9 10 11 12 13 14 15 A(222) A(222) A(222) A(222) A(222) A(222) A(222) A(222) A(222) A(222) A(222) A(222) A(222) AE-641016A(222) 197 22-27-2021 2031 2041 2051 2061 2071 2081 2091 2101 2111 2121 2131 2141 2151 22-27-2161 AE-64102C(197) 3 4 5 6 7 8 9 10 11 12 13 14 15 C(197) C(197) C(197) C(197) C(197) C(197) C(197) C(197) C(197) C(197) C(197) C(197) C(197) AE-641016C(197) 197 38-00-6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 38-00-6306 AE-64102H(197) 3 4 5 6 7 8 9 10 11 12 13 14 15 H(197) H(197) H(197) H(197) H(197) H(197) H(197) H(197) H(197) H(197) H(197) H(197) H(197) AE-641016H(197) 197 AE-6410- 154 NOT TOOLED NOT TOOLED NOT TOOLED 22-27-2057 NOT TOOLED NOT TOOLED 22-27-2087 NOT TOOLED 38-00-6754 2J(197) NOT TOOLED 3 J(197) 4 J(197) 22-27-2046 NOT TOOLED 5 J(197) 6 J(197) 7 J(197) 8 J(197) 9 J(197) 10 J(197) NOT TOOLED 11 J(197) 12 J(197) 22-27-2126 NOT TOOLED 13 J(197) 14 J(197) 15 J(197) AE-6410NOT TOOLED 16J(197) AE-64102L(154) 3 4 5 6 7 8 9 10 11 12 13 14 15 AE-641016L(154) NOT TOOLED 154 NOT TOOLED 26-01-3195 NOT TOOLED L(154) L(154) L(154) L(154) L(154) L(154) L(154) L(154) L(154) L(154) L(154) L(154) L(154) F AE-64102M(154) NOT TOOLED 26-01-3179 NOT TOOLED NOT TOOLED NOT TOOLED 46999-0696 NOT TOOLED 3 M(154) 4 M(154) 5 M(154) 6 M(154) 7 M(154) 8 M(154) 9 M(154) 10 M(154) 11 M(154) 12 M(154) 13 M(154) NOT TOOLED 14 M(154) 15 M(154) 38-00-1736 AE-6410NOT TOOLED 16M(154) NOT TOOLED E D C C B B 0 = 0 = 0 ALTERNATIVE WAFER CONFIGURATION = A RELEASE STATUS FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 P1 RELEASE DATE 11 14.06.2016 C 16:45:46 10 9 8 7 6 0 = 0 = 0 = 0 BC1 5 REV = 104930 MKIPPER JDFOX FSMITH 0 EC NO: DRWN: CHK'D: APPR: (4-16 CCTS. ONLY) = ADD 46999-0696 RIBS ADDED 2016/01/21 2016/05/31 2016/06/14 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM 5:1 DRWN BY DATE 28/01/03 4 PLACES ± ± T. MAHON 3 PLACES ± ± 0.01 CHK'D BY 2 PLACES ± 0.25 ± 0.014 BMAGUIRE 1 PLACES ± 0.35 ± APPR BY 0 PLACES ± ± DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 28/01/03 DATE JDENNEHY ANGULAR TOL ± 0.5 WAFER, FRICTION LOCK KK (2.54)/.100 FOR (0.64)/.025 SQ. PINS DATE PRODUCT CUSTOMER DRAWING 2005/03/11 THIRD ANGLE PROJECTION C SERIES MATERIAL NUMBER 6410 SEE CHART GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER SDAE-6410-N 3 CUSTOMER 2 PSD 2 OF 4 000 1 A 12 11 10 9 7 8 5 6 4 3 2 1 H H ENG. NO. G AE-6410-NA ( 241 ) AE-6410-NC AE-6410-NA ( 241 ) ( 231 ) AE-6410-NS (7.50) .295 ( 241 ) AE-6410-NA (7.50) .295 ( 228 ) DIMN. "D" (7.50) .295 (7.14) .281 DIMN. "C" (14.22)/.560 (20.32)/.800 (14.22)/.560 (16.51)/.650 (14.22)/.560 DIMN. "F" (3.56)/.140 REF (10.00)/.394 REF (3.56)/.140 REF (5.84)/.230 REF (3.56)/.140 REF (7.50) .295 DIMN. "G" (3.56)/.140 (5.08)/.200 (3.56)/.140 (5.08)/.200 (3.56)/.140 DIMN. "T" (3.43)/.135 (5.08)/.200 (3.43)/.135 (5.08)/.200 (3.43)/.135 PLATING 241 241 NO. OF CIRCUITS F E 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 AE-64102A(241) 3 4 5 6 7 8 9 10 11 12 13 14 15 22-29-2021 2031 2041 2051 2061 2071 2081 2091 2101 2111 2121 2131 2141 2151 22-29-2161 A(241) A(241) A(241) A(241) A(241) A(241) A(241) A(241) A(241) A(241) A(241) A(241) A(241) AE-641016A(241) AE-64102C(241) 3 4 5 6 7 8 9 10 11 12 13 14 15 C(241) C(241) C(241) C(241) C(241) C(241) C(241) C(241) C(241) C(241) C(241) C(241) C(241) AE-641016C(241) 231 AE-6410- NOT TOOLED 2A(231) 3 A(231) 38-00-5909 NOT TOOLED 4 A(231) 5 A(231) 6 A(231) 7 A(231) 8 A(231) 9 A(231) 10 A(231) 11 A(231) 12 A(231) 13 A(231) 14 A(231) 15 A(231) AE-6410NOT TOOLED 16A(231) 241 38-00-7250 NOT TOOLED 38-00-7251 NOT TOOLED AE-64104S(241) 6 S(241) 228 AE-64102A(228) NOT TOOLED NOT TOOLED 38-00-7666 NOT TOOLED 38-00-7667 NOT TOOLED 3 4 5 6 7 8 9 10 11 12 13 14 15 NOT TOOLED NOT TOOLED G A(228) A A A A A A A A A A A A AE-641016A(228) 38-00-7062 7063 7064 7065 7066 7067 38-00-7068 NOT TOOLED NOT TOOLED NOT TOOLED 38-00-7072 NOT TOOLED 38-00-7074 NOT TOOLED NOT TOOLED F E D D C C B B = 0 = 0 = A RELEASE STATUS FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 P1 RELEASE DATE 11 14.06.2016 C 16:45:46 10 9 8 7 6 0 = 0 = 0 = 0 BC1 5 REV 0 104930 MKIPPER JDFOX FSMITH = EC NO: DRWN: CHK'D: APPR: 0 ADD 46999-0696 = 2016/01/21 2016/05/31 2016/06/14 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM 5:1 DRWN BY DATE 28/01/03 4 PLACES ± ± T. MAHON 3 PLACES ± ± 0.01 CHK'D BY 2 PLACES ± 0.25 ± 0.014 BMAGUIRE 1 PLACES ± 0.35 ± APPR BY 0 PLACES ± ± DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 28/01/03 DATE JDENNEHY ANGULAR TOL ± 0.5 WAFER, FRICTION LOCK KK (2.54)/.100 FOR (0.64)/.025 SQ. PINS DATE PRODUCT CUSTOMER DRAWING 2005/03/11 THIRD ANGLE PROJECTION C SERIES MATERIAL NUMBER 6410 SEE CHART GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER SDAE-6410-N 3 CUSTOMER 2 PSD 3 OF 4 000 1 A 12 11 10 9 7 8 5 6 4 3 2 1 H H VOIDED CIRCUIT OPTION G F ENG. NO. AE-6410-NA(197)-* DIM. D 7.50/.295 DIM. C 14.22 /.560 DIM. F (REF) 3.56 /.140 DIM. G N/A DIM. T OVERALL PLATING 197 PART No. G F ENG No. CKT SIZE VOID LOCATION 38-00-7222 AE-6410-3A(197)-2 3 2 4749 -4A(197)-3 4 3 0611 -5A(197)-3 5 3 0089 -6A(197)-3 6 3 0090 -6A(197)-51 6 3,4,5 5370 -15A(197)-02 15 2 7688 -12A(197)-09 12 9 E E D D C C B B = 0 = 0 = A RELEASE STATUS FORMAT: Eng-lega-master-tb-prod-C REVISION: C DATE: 2016/02/04 12 P1 RELEASE DATE 11 14.06.2016 C 16:45:46 10 9 8 7 6 0 = 0 = 0 = 0 BC1 5 REV 0 104930 MKIPPER JDFOX FSMITH = EC NO: DRWN: CHK'D: APPR: 0 ADD 46999-0696 = 2016/01/21 2016/05/31 2016/06/14 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL TOLERANCES (UNLESS SPECIFIED) MM/IN INCH MM 5:1 DRWN BY DATE 28/01/03 4 PLACES ± ± T. MAHON 3 PLACES ± ± 0.01 CHK'D BY 2 PLACES ± 0.25 ± 0.014 BMAGUIRE 1 PLACES ± 0.35 ± APPR BY 0 PLACES ± ± DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 28/01/03 DATE JDENNEHY ANGULAR TOL ± 0.5 WAFER, FRICTION LOCK KK (2.54)/.100 FOR (0.64)/.025 SQ. PINS DATE PRODUCT CUSTOMER DRAWING 2005/03/11 THIRD ANGLE PROJECTION C SERIES MATERIAL NUMBER 6410 SEE CHART GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER DOCUMENT NUMBER SDAE-6410-N 3 CUSTOMER 2 PSD 4 OF 4 000 1 A