26-60-4040

9 7 8 5 6 4 3 2 1 CKT DIM. A DIM. B 2 7.77 .306 3.96 ±0.05 .156 ±.002 11.73 .462 15.70 .618 19.66 .774 23.62 .930 27.58 1.086 31.55 1.242 35.51 1.398 39.47 1.554 43.43 1.710 47.40 1.866 51.36 2.022 55.32 2.178 59.28 2.334 63.25 2.490 67.21 2.646 71.17 2.802 7.92 ±0.08 .312 ±.003 11.89 ±0.08 .468 ±.003 15.85 ±0.10 .624 ±.004 19.81 ±0.10 .780 ±.004 23.77 ±0.10 .936 ±.004 27.74 ±0.13 1.092 ±.005 31.70 ±0.13 1.248 ±.005 35.66 ±0.13 1.404 ±.005 39.62 ±0.15 1.560 ±.006 43.59 ±0.15 1.716 ±.006 47.55 ±0.15 1.872 ±.006 3 4 DIM. A REF E 1.91 .075 DIM. B 2.41 .095 5.11 .201 6 3.96REF. .156 TYP. BETWEEN ANY 2 CONSECUTIVE CKTS. AT -D- FEATURE MAY BE ON EITHER SIDE OF THE PART 5 CENTERLINE OF PIN AT TIP NOT TO VARY FROM CENTERLINE OF PIN AT DATUM -DBY MORE THAN 0.20/.008 IN ANY DIRECTION. 7 8 9 ±0.38 M ±.015 11.33 ±0.51 .446 ±.020 DETAIL Z CKT. NO. 1 GOLD TYP SEE NOTE 10 AND DETAIL Z D P TYP REF 10 SEE NOTE 9 11 12 -D- 3.30 ±0.25 .130 ±.010 13 TIN 14 VOIDED CKT. SEE CHART FOR LOCATION 10.01 ±0.51 .394 ±.020 15 16 CENTERLINE OF PIN AT TIP NOT TO VARY FROM CENTERLINE OF PIN AT DATUM -DBY MORE THAN 0.13/.005 IN ANY DIRECTION. DETAIL Z SCALE 4:1 3.96 ±0.05 TYP .156 ±.002 NON-ACCUM 1.70 ±0.05 .067 ±.002 18 DIA TYP 5.08 .200 MIN 9 C 8 7 6 5 2016/08/01 2016/08/18 2016/08/25 = 0 = 0 = 0 = 0 = 0 = 0 ADD 41791-0090 0 R REV RELEASE DATE = 107107 MKIPPER JBELL FSMITH A 0 EC NO: DRWN: CHK'D: APPR: RECOMMENDED P.C.BOARD LAYOUT FORMAT: Eng-lega-master-tb-prod-B REVISION: C DATE: 2016/04/04 NONE NONE NONE E 3&4 4&5 4&5 5&6 5&6 6&7 51.51 ±0.18 2.028 ±.007 55.47 ±0.18 2.184 ±.007 59.44 ±0.18 2.340 ±.007 63.40 ±0.20 2.496 ±.008 67.36 ±0.20 2.652 ±.008 4&5 8&9 4&5 9 & 10 5&6 9 & 10 5&6 10 & 11 5&6 11 & 12 6&7 11 & 12 6&7 12 & 13 D C B QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS = RELEASE STATUS NONE NOTES: 1. MATERIAL: HEADER-GLASS FILLED POLYESTER, 94V-0, MOLDED NATURAL (WHITE). 2. FINISH: (154-TIN) OVERALL TIN: 0.00254/.000100 MIN. OVER 0.00127/.000050 MIN NICKEL. (197-TIN) OVERALL REFLOWED MATTE TIN: 0.00152/.000060 MIN. OVER 0.00127/.000050 MIN. NICKEL OVERALL. (222-TIN) OVERALL MATTE TIN: 0.00254/.000100 MIN. OVER 0.00127/.000050 MIN NICKEL. (208-15 GOLD) SELECT GOLD: 0.00038/.000015 MIN, SELECT TIN: 0.00254/.000100 MIN, OVERALL NICKEL UNDERPLATE: 0.00127/.000050 MIN. (228-30 GOLD) SELECT GOLD: 0.00076/.000030 MIN, SELECT TIN: 0.00254/.000100 MIN, OVERALL NICKEL UNDERPLATE: 0.00127/.000050 MIN. (241-20 GOLD) 0.00051/.000020 MIN. SELECT TIN: 0.00254/.000100 MIN. OVERALL NICKEL UNDERPLATE: 0.00127/.000050 MIN. 3. PRODUCT SPECIFICATION AND PROCESS PARAMETERS: SEE PS-08-50. 4. PACKAGING INFORMATION: SEE CHARTS. 5. SOLDERABILITY: PER SMES-152. 6. PIN PUSH-OUT FORCE: PRIOR TO SOLDERING, A 3 LB. MINIMUM FORCE (IN EITHER DIRECTION) 7. PARTS ARE STACKABLE END TO END ON 3.96/.156 CENTERS. 8. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 9. SLOTS ON BACKWALL ARE BETWEEN CIRCUITS. SEE CHART FOR LOCATION. 10 FEATURE MAY OR MAY NOT EXTEND ACROSS THE ENTIRE FACE OF THE PART "SEE DETAIL Z". C B 17 SLOT LOC BETWEEN CKTS GENERAL TOLERANCES (UNLESS SPECIFIED) INCH MM MM/IN 2:1 DRWN BY DATE 4 PLACES ± ± JSCHAFER 3 PLACES ± ± 0.015 CHK'D BY 2 PLACES ± 0.25 ± 0.01 KSAMIEC 1 PLACES ± 0.38 ± APPR BY 0 PLACES ± ± ANGULAR TOL ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 2003/11/07 KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS DATE MARGULIS DRAWING SIZE B 2003/11/07 DATE 2003/11/07 THIRD ANGLE PROJECTION PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 41791 SEE CHART DOCUMENT NUMBER 3 CUSTOMER SDA-41791 2 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 000 1 1 OF * A OPTIONS 41791 Group A-41791-0002/0018 Group A-41791-0019/0035 Group A-41791-0036/0052 Group A-41791-0059/0074 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Pin No: 43294-0214 Pin No: 43294-0215 Pin No: 43294-0214 Pin No: 43294-0214 Plating: 197 – TIN Plating: 241 – GOLD Plating: 197 – TIN Plating: 197 – TIN Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Mating 11.43 / .450 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G N/A Gold Loc G 6.85/ .270 Gold Loc G N/A Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 Tin Loc T OVERALL Tin Loc T 4.06/ .160 Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts NONE Voided Ckts NONE Voided Ckts 2 Voided Ckts 3 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Material No Engineer Number M Material No Engineer Number M Material No Engineer Number M Material No Engineer Number 2 26-60-4020 A-41791-0002 26-61-4020 A-41791-0019 26-62-4020 A-41791-0036 3 26-60-4030 A-41791-0003 26-61-4030 A-41791-0020 26-62-4030 A-41791-0037 26-62-4036 A-41791-0059 4 26-60-4040 A-41791-0004 26-61-4040 A-41791-0021 26-62-4040 A-41791-0038 26-62-4046 A-41791-0060 5 26-60-4050 A-41791-0005 26-61-4050 A-41791-0022 26-62-4050 A-41791-0039 26-62-4056 A-41791-0061 6 26-60-4060 A-41791-0006 26-61-4060 A-41791-0023 26-62-4060 A-41791-0040 26-62-4066 A-41791-0062 7 26-60-4070 A-41791-0007 26-61-4070 A-41791-0024 26-62-4070 A-41791-0041 26-62-4076 A-41791-0063 8 26-60-4080 A-41791-0008 26-61-4080 A-41791-0025 26-62-4080 A-41791-0042 26-62-4086 A-41791-0064 9 26-60-4090 A-41791-0009 26-61-4090 A-41791-0026 26-62-4090 A-41791-0043 26-62-4096 A-41791-0065 10 26-60-4100 A-41791-0010 26-61-4100 A-41791-0027 26-62-4100 A-41791-0044 26-62-4106 A-41791-0066 11 26-60-4110 A-41791-0011 26-61-4110 A-41791-0028 26-62-4110 A-41791-0045 26-62-4116 A-41791-0067 12 26-60-4120 A-41791-0012 26-61-4120 A-41791-0029 26-62-4120 A-41791-0046 26-62-4126 A-41791-0068 13 26-60-4130 A-41791-0013 26-61-4130 A-41791-0030 26-62-4130 A-41791-0047 26-62-4136 A-41791-0069 14 26-60-4140 A-41791-0014 26-61-4140 A-41791-0031 26-62-4140 A-41791-0048 26-62-4146 A-41791-0070 15 26-60-4150 A-41791-0015 26-61-4150 A-41791-0032 26-62-4150 A-41791-0049 26-62-4156 A-41791-0071 16 26-60-4160 A-41791-0016 26-61-4160 A-41791-0033 26-62-4160 A-41791-0050 26-62-4166 A-41791-0072 17 26-60-4170 A-41791-0017 26-61-4170 A-41791-0034 26-62-4170 A-41791-0051 26-62-4176 A-41791-0073 18 26-60-4180 A-41791-0018 26-61-4180 A-41791-0035 26-62-4180 A-41791-0052 26-62-4186 A-41791-0074 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -2APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-0086/0100 Group A-41791-0309/0308 Group A-41791-0464/0480 Group A-41791-0481/0491 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0002/0012 Pin No: 43294-0214 Pin No: 43294-0215 Pin No: 43294-0240 Pin No: 43294-0355 Plating: 197 – TIN Plating: 241 – GOLD Plating: 197 – TIN Plating: 154 – TIN Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 19.05 / .750 Pin Length L 22.35 / .880 Mating 11.56 / .455 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G N/A Gold Loc G 6.85/ .270 Gold Loc G N/A Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 4.32 / .170 PC Tail P 7.49 / .295 Tin Loc T OVERALL Tin Loc T 4.06/ .160 Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts 2, 4 Voided Ckts 2 Voided Ckts NONE Voided Ckts NONE Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-002 Ckts M Material No Engineer Number M Material No Engineer Number 2 3 26-63-4031 M Material No Engineer Number M Material No Engineer Number 26-60-4023 A-41791-0464 41791-0481 A-41791-0481 A-41791-0310 26-60-4033 A-41791-0465 41791-0482 A-41791-0482 4 26-62-4041 A-41791-0086 A-41791-0311 26-60-4043 A-41791-0466 41791-0483 A-41791-0483 5 26-62-4051 A-41791-0087 26-63-4051 A-41791-0312 26-60-4053 A-41791-0467 41791-0484 A-41791-0484 6 26-62-4061 A-41791-0088 26-63-4061 A-41791-0313 26-60-4063 A-41791-0468 41791-0485 A-41791-0485 A-41791-0089 26-63-4071 A-41791-0314 26-60-4073 A-41791-0469 41791-0486 A-41791-0486 A-41791-0090 A-41791-0315 26-60-4083 A-41791-0470 41791-0487 A-41791-0487 A-41791-0091 A-41791-0316 26-60-4093 A-41791-0471 41791-0488 A-41791-0488 A-41791-0092 A-41791-0317 26-60-4103 A-41791-0472 41791-0489 A-41791-0489 11 A-41791-0093 A-41791-0318 26-60-4113 A-41791-0473 41791-0490 A-41791-0490 12 A-41791-0094 A-41791-0319 26-60-4123 A-41791-0474 41791-0491 A-41791-0491 13 A-41791-0095 A-41791-0320 26-60-4133 A-41791-0475 14 A-41791-0096 A-41791-0321 26-60-4143 A-41791-0476 15 A-41791-0097 A-41791-0322 26-60-4153 A-41791-0477 16 A-41791-0098 A-41791-0323 26-60-4163 A-41791-0478 17 A-41791-0099 A-41791-0324 26-60-4173 A-41791-0479 18 A-41791-0100 A-41791-0325 26-60-4183 A-41791-0480 7 8 41791-0090 9 10 26-62-4101 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -3APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-0583/0597 Group A-41791-0598/0609 Group A-41791-0638/0653 Group A-41791-0773/0785 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0006/0018 Pin No: 43294-0214 Pin No: 43294-0214 Pin No: 43294-0215 Pin No: 43294-0214 Plating: 197 – TIN Plating: 197 – TIN Plating: 241 – GOLD Plating: 197-TIN Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29/.720 Mating 11.43/.450 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G N/A Gold Loc G N/A Gold Loc G 6.85/ .270 Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56/.140 Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T 4.06/ .160 Tin Loc T OVERALL Voided Ckts 4 Voided Ckts 7 Voided Ckts 3 Voided Ckts 3, 6 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Material No Engineer Number M Material No Engineer Number M Material No Engineer Number M Item Number 2 3 26-63-4032 A-41791-0638 4 27-62-4049 A-41791-0583 41791-0639 A-41791-0639 5 27-62-4059 A-41791-0584 26-63-4052 A-41791-0640 6 27-62-4069 A-41791-0585 26-63-4062 A-41791-0641 7 27-62-4079 A-41791-0586 41791-0598 A-41791-0598 41791-0642 A-41791-0642 8 27-62-4089 A-41791-0587 41791-0599 A-41791-0599 26-63-4082 A-41791-0643 9 27-62-4099 A-41791-0588 27-66-4090 A-41791-0600 41791-0644 A-41791-0644 10 27-62-4109 A-41791-0589 41791-0601 A-41791-0601 41791-0645 A-41791-0645 11 27-62-4119 A-41791-0590 41791-0602 A-41791-0602 41791-0646 A-41791-0646 12 27-62-4129 A-41791-0591 41791-0603 A-41791-0603 41791-0647 A-41791-0647 13 27-62-4139 A-41791-0592 41791-0604 A-41791-0604 41791-0648 A-41791-0648 14 27-62-4149 A-41791-0593 41791-0605 A-41791-0605 41791-0649 A-41791-0649 15 27-62-4159 A-41791-0594 41791-0606 A-41791-0606 41791-0650 A-41791-0650 16 27-62-4169 A-41791-0595 41791-0607 A-41791-0607 41791-0651 A-41791-0651 17 27-62-4179 A-41791-0596 41791-0608 A-41791-0608 41791-0652 A-41791-0652 18 27-62-4189 A-41791-0597 41791-0609 A-41791-0609 41791-0653 A-41791-0653 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 9/28/2016 SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS 107107 DOCUMENT NUMBER: 41791-0774 CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -4APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-0815/0831 Group A-41791-0832/0848 Group A-41791-0849/0865 Group A-41791-0883/0891 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0002/0018 Header No: 41790-0010/0018 Pin No: 43294-0661 Pin No: 43294-0209 Pin No: 43294-0210 Pin No: 43294-0214 Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: 228 – 30 GOLD Plating: 197 – TIN Pin Length L 30.48 / 1.200 Pin Length L 18.29/. 720 Pin Length L 18.29/. 720 Pin Length L 18.29 / .720 Mating 11.43 / .450 11.43 / .450 Mating 11.43/. 450 Mating 11.43/. 450 Mating Gold Loc G M N/A Gold Loc G 6.86/. 270 Gold Loc G 6.86/. 270 Gold Loc G N/A PC Tail P 15.75/ .620 PC Tail P 3.56/. 140 PC Tail P 3.56/. 140 PC Tail P 3.56 / .140 Tin Loc T OVERALL Tin Loc T 4.06/. 160 Tin Loc T 4.06/. 160 Tin Loc T OVERALL Voided Ckts NONE Voided Ckts NONE Voided CKts NONE Voided Ckts 10 Pack Per PK-41791-003 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts Item Number M Material No Engineer Number M Material No M Engineer Number 2 41791-0815 41791-0832 A-41791-0832 41791-0849 A-41791-0849 3 41791-0816 41791-0833 A-41791-0833 41791-0850 A-41791-0850 4 41791-0817 41791-0834 A-41791-0834 41791-0851 A-41791-0851 5 41791-0818 41791-0835 A-41791-0835 41791-0852 A-41791-0852 6 41791-0819 41791-0836 A-41791-0836 41791-0853 A-41791-0853 7 41791-0820 41791-0837 A-41791-0837 41791-0854 A-41791-0854 8 41791-0821 41791-0838 A-41791-0838 41791-0855 A-41791-0855 Item Number 9 41791-0822 41791-0839 A-41791-0839 41791-0856 A-41791-0856 10 41791-0823 41791-0840 A-41791-0840 41791-0857 A-41791-0857 41791-0883 11 41791-0824 41791-0841 A-41791-0841 41791-0858 A-41791-0858 41791-0884 12 41791-0825 41791-0842 A-41791-0842 41791-0859 A-41791-0859 41791-0885 13 41791-0826 41791-0843 A-41791-0843 41791-0860 A-41791-0860 41791-0886 14 41791-0827 41791-0844 A-41791-0844 41791-0861 A-41791-0861 41791-0887 15 41791-0828 41791-0845 A-41791-0845 41791-0862 A-41791-0862 41791-0888 16 41791-0829 41791-0846 A-41791-0846 41791-0863 A-41791-0863 41791-0889 17 41791-0830 41791-0847 A-41791-0847 41791-0864 A-41791-0864 41791-0890 18 41791-0831 41791-0848 A-41791-0848 41791-0865 A-41791-0865 41791-0891 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -5APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-0892/0908 Group A-41791-0922/0933 Group 41791-0934/0948 Group 41791-0966/0976 Header No: 41790-0002/0018 Header No: 41790-0007/0018 Header No: 41790-0004/0018 Header No: 41790-0007/0018 Pin No: 43294-0299 Pin No: 43294-0214 Pin No: 43294-0209 Pin No: 43294-0214 Plating: 208 – 15 GOLD Plating: 197 – TIN Plating: 208 – 15 GOLD Plating: 197 – TIN Pin Length L 20.83 / .820 Pin Length L 18.29 / .720 Pin Length L 18.29/. 720 Pin Length L 18.29/. 720 Mating 11.43/. 450 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G M 6.83/. 270 Gold Loc G N/A Gold Loc G 6.86/ .270 Gold Loc G N/A PC Tail P 6.10/ .240 PC Tail P 3.56 / .140 PC Tail P 3.56/. 140 PC Tail P 3.56/. 140 Tin Loc T 6.35/ .250 Tin Loc T OVERALL Tin Loc T 4.06/. 160 Tin Loc T OVERALL Voided Ckts NONE Voided Ckts 5, 7 Voided Ckts 4 Voided Ckts 3, 7, 8 Pack Per PK-41791-002 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Item Number M Item Number M Item Number Item Number 2 41791-0892 3 41791-0893 4 41791-0894 41791-0934 5 41791-0895 41791-0935 6 41791-0896 7 41791-0897 41791-0922 41791-0937 8 41791-0898 41791-0923 41791-0938 41791-0966 41791-0936 9 41791-0899 41791-0924 41791-0939 41791-0967 10 41791-0900 41791-0925 41791-0940 41791-0968 11 41791-0901 41791-0926 41791-0941 41791-0969 12 41791-0902 41791-0927 41791-0942 41791-0970 13 41791-0903 41791-0928 41791-0943 41791-0971 14 41791-0904 41791-0929 41791-0944 41791-0972 15 41791-0905 41791-0930 41791-0945 41791-0973 16 41791-0906 41791-0931 41791-0946 41791-0974 17 41791-0907 41791-0932 41791-0947 41791-0975 18 41791-0908 41791-0933 41791-0948 41791-0976 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -6APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group 41791-0977/0993 Group 41791-0994/1002 Group A-41791-1036 / 1048 Group A-41791-1049/1062 Header No: 41790-0002/0018 Header No: 41790-0010/0018 Header No: 41790-0006 / 0018 Header No: 41790-0005/0018 Pin No: 43294-0345 Pin No: 43294-0209 Pin No: 43294-0214 Pin No: 43294-0214 Plating: 228 – 30 GOLD Plating: 208 – 15 GOLD Plating: 197 – TIN Plating: 197 – TIN Pin Length L 22.10/. 870 Pin Length L 18.29/. 720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Mating 11.43 / .450 11.43/. 450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G 10.02/. 400 Gold Loc G 6.86/ .270 Gold Loc G N/A Gold Loc G N/A PC Tail P 7.37/. 290 PC Tail P 3.56/. 140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 Tin Loc T 5.08/. 200 Tin Loc T 4.06/. 160 Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts None Voided Ckts 3, 4, 5, 8, 9, 10 Voided Ckts 4, 6 Voided Ckts 2, 5 Pack Per PK-41791-002 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Item Number M Item Number M Material No Engineer Number 2 41791-0977 3 41791-0978 4 41791-0979 5 41791-0980 6 41791-0981 7 41791-0982 41791-1037 A-41791-1037 8 41791-0983 41791-1038 A-41791-1038 9 41791-0984 41791-0985 41791-0994 A-41791-1040 11 41791-0986 41791-0995 A-41791-1041 12 41791-0987 41791-0996 A-41791-1042 13 41791-0988 41791-0997 A-41791-1043 14 41791-0989 41791-0998 A-41791-1044 15 41791-0990 41791-0999 A-41791-1045 16 41791-0991 41791-1000 A-41791-1046 17 41791-0992 41791-1001 A-41791-1047 18 41791-0993 41791-1002 A-41791-1048 R DATE: 41791-1051 A-41791-1039 ECM INFORMATION ECM NO.: Item Number A-41791-1036 10 REV: M TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -7APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-1063/1071 Group A-41791-1074/1088 Group A-41791-1089/1105 Group A-41791-1107 Header No: 41790-0010/0018 Header No: 41790-0004/0018 Header No: 41790-0002/0018 Header No: 41790-0006/0018 Pin No: 43294-0214 Pin No: 43294-0215 Pin No: 43294-0212 Pin No: 43294-0213 Plating: 197 – TIN Plating: 241 – GOLD Plating: 222 – TIN Plating: 154 – TIN Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Mating 11.43 / .450 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G M N/A Gold Loc G 6.85/ .270 Gold Loc G N/A Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 Tin Loc T OVERALL Tin Loc T 4.06/ .160 Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts 5, 10 Voided Ckts 2, 3, 4 Voided Ckts NONE Voided Ckts 6 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts Item Number M Item Number 2 M Item Number 3 41791-1089 41791-1090 4 41791-1091 5 Item Number 41791-1075 41791-1093 6 7 41791-1107 8 41791-1095 9 41791-1096 10 41791-1097 11 M 41791-1098 41791-1064 41791-1099 12 13 14 15 41791-1103 16 17 41791-1105 18 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -8APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-1120 Group A-41791-1134 Group A-41791-1150 Group A-41791-1165 Header No: 41790-0006 Header No: 41790-0004 Header No: 41790-0005 Header No: 41790-0006 Pin No: 43294-0213 Pin No: 43294-0213 Pin No: 43294-0210 Pin No: 43294-0239 Plating: 154 – TIN Plating: 154 – TIN Plating: 228 – 30 GOLD Plating: 154 – TIN Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29/. 720 Pin Length L 19.05 / .750 Mating 11.43 / .450 11.43 / .450 Mating 11.43 / .450 Mating 11.43/. 450 Mating Gold Loc G N/A Gold Loc G N/A Gold Loc G 6.85/. 270 Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56/. 140 PC Tail P 4.32 / .170 Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T 4.06/. 160 Tin Loc T OVERALL Voided Ckts 2, 5 Voided Ckts 2, 3 Voided Ckts 2, 4 Voided Ckts 2, 3, 5 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Item Number M Item Number M Item Number M Item Number 2 3 4 41791-1134 41791-1150 5 6 41791-1120 41791-1165 7 8 9 10 11 12 13 14 15 16 17 18 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL -9APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-1179 Group A-41791-1189 Group A-41791-1203 Group A-41791-1215 Header No: 41790-0008/0018 Header No: 41790-0006/0018 Header No: 41790-0009/0018 Header No: 41790-0006/0018 Pin No: 43294-0214 Pin No: 43294-0240 Pin No: 43294-0240 Pin No: 43294-0240 Plating: 197 – TIN Plating: 197 – TIN Plating: 197 – TIN Plating: 197 – TIN Pin Length L 18.29 / .720 Pin Length L 19.05 / .750 Pin Length L 19.05 / .750 Pin Length L 19.05 / .750 Mating 11.43 / .450 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G N/A Gold Loc G N/A Gold Loc G N/A Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 4.32 / .170 PC Tail P 4.32 / .170 PC Tail P 4.32 / .170 Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts 2,4,8 Voided Ckts 2,3,4,5 Voided Ckts 4,5,7,9 Voided Ckts 2,4,6 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Item Number M Item Number M Item Number M Item Number 2 3 4 5 6 41791-1189 7 8 9 41791-1179 41791-1215 41791-1203 10 11 12 13 14 15 16 17 18 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL - 10 APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-1228 Group A-41791-1240 Group A-41791-1256 Group A-41791-1264/1274 Header No: 41790-0005/0018 Header No: 41790-0007 Header No: 41790-0012 Header No: 41790-0004/0014 Pin No: 43294-0214 Pin No: 43294-0214 Pin No: 43294-0214 Pin No: 43294-0214 Plating: 197 – TIN Plating: 197 – TIN Plating: 197 – TIN Plating: 197 – TIN Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Mating 11.43 / .450 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G N/A Gold Loc G N/A Gold Loc G N/A Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts 4,5 Voided Ckts 2,3,5,6 Voided Ckts 8 Voided Ckts 2,3 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Item Number M Item Number M Item Number M Item Number 2 3 4 41791-1264 5 6 7 8 41791-1240 41791-1228 9 10 11 41791-1256 12 13 14 41791-1274 15 16 17 18 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL - 11 APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC OPTIONS 41791 Group A-41791-1285 Group A-41791-1307/1316 Group A-41791-1318 Group A-41791-1333 Header No: 41790-0017 Header No: 41790-0009/0018 Header No: 41790-0005 Header No: 41790-0007 Pin No: 43294-0214 Pin No: 43294-0214 Pin No: 43294-0214 Pin No: 43294-0214 Plating: 197 – TIN Plating: 197 – TIN Plating: 197 – TIN Plating: 197 – TIN Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Pin Length L 18.29 / .720 Mating 11.43 / .450 11.43 / .450 Mating 11.43 / .450 Mating 11.43 / .450 Mating Gold Loc G N/A Gold Loc G N/A Gold Loc G N/A Gold Loc G N/A PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 PC Tail P 3.56 / .140 Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T OVERALL Tin Loc T OVERALL Voided Ckts 11 Voided Ckts 5,9 Voided Ckts 2,3,4 Voided Ckts 3,5,6 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Pack Per PK-41791-001 Ckts M Item Number M Item Number M Item Number M Item Number 2 3 4 41791-1318 5 6 7 41791-1333 8 9 10 11 12 13 14 41791-1312 15 16 17 41791-1285 18 REV: R ECM INFORMATION ECM NO.: DATE: TITLE: 107107 9/28/2016 DOCUMENT NUMBER: SDA- 41791 SHEET No. KK 156 HEADER ASSEMBLY FRICTION LOCK VERTICAL SOLID BODY W/O PEGS CREATED / REVISED BY: MKIPPER CHECKED BY: JBELL - 12 APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC [SIZE_A](V.1). DOC