314022500

19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L L TABLE OF CONTENTS MATING INTERFACE DRAWING DRAWING INFORMATION SHEET DESCRIPTION SHEET NO. DRAWING NO. DESCRIPTION 1 NOTES AND BOM 2 CONNECTOR ASSEMBLY WITHOUT CLIPSLOT PS-31402-000 PRODUCT SPECIFICATION INTERFACE DEFINITION DESCRIPTION 1X2 *064-S-002-1-Z02 1X3 *064-S-003-1-Z01 SD-31402-211 1X4 *064-S-004-1-Z02 FOR 31404 1X8 REFER TO SD-31404-811 1X5 *064-S-005-1-Z02 1X6 *064-S-006-1-Z02 1X8 *064-S-008-1-Z02 FOR 31404 1X8 REFER TO PS-31404-001-1X8 3 CONNECTOR ASSEMBLY WITH CLIPSLOT K 1X2 PK-31300-256 PACKAGING 4-5 KEY CONFIGURATIONS 6-9 BOM SALES DRAWING FOR 1X2 REFER TO TS-31402-001-1X2 K FOR 1X3 REFER TO TS-31402-001-1X3 TEST SUMMARY J FOR 1X6 REFER TO TS-31402-001-1X6 J FOR 31404 1X8 REFER TO TS-31404-001-1X8 H H 1X3 PART NUMBER LEGEND CONNECTOR ASSEMBLY NOTES: VALID UNLESS OTHERWISE SPECIFIED G 3140X-XXXX SEAL PLUG CONFIGURATION (AS MOLDED) 0 - ALL CIRCUITS OPEN 1-9 SEE CHART 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-31402-000 -CONTAINS: SEE AS CONTENT CPA OPTION 0 OR 2 - WITHOUT CPA 1 OR 3 - WITH CPA 4 - WITHOUT CPA, WITH CLIPSLOT 5 - WITH CPA, WITH CLIPSLOT -DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED IN THE MATING INTERFACE DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT . 1X4 -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION USCAR POLARIZATION OPTION 1 - POLARIZATION OPTION A 2 - POLARIZATION OPTION B 3 - POLARIZATION OPTION C 4 - POLARIZATION OPTION D 5 - POLARIZATION OPTION B, BLACK 6 - POLARIZATION OPTION C, BLACK 7 - POLARIZATION OPTION D, BLACK 8 - POLARIZATION OPTION C, NATURAL 9 - POLARIZATION OPTION D, GRAY 0 - POLARIZATION OPTION D, DARK GRAY (SEE PLR PRE-LOCK VIEW ON SHEET 2 SECTION A-A). F b. PRODUCT RELATED DRAWING REFER TO DRAWING INFORMATION CHART c. TPA'S MAY BECOME SEATED DURING TRANSIT. IF THIS OCCURS, TPA'S SHOULD BE MOVED TO THE PRE-LOCKED POSITION PRIOR TO FEMALE TERMINAL INSTALLATION. REFERENCE PRODUCT SPECIFICATION: PS-34646-001 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS E (COMPANY ID#13255) T f. SYSTEM EXCEPT SERIES 31404 1X8 CIRCUIT TO BE USED WITH OUTSIDE WIRE DIAMETERS RANGING T1 FROM 1.20MM TO 2.06MM WITHIN RANGE OF: 1X5 G F E CIRCUIT SIZE 2, 3, 4, 5, 6 & 8 6 - CIRCUIT SIZE 6, WITH 31412-6500 OR 31412-6501 RING SEAL (FOR 31402 AND 31403 SERIES) WITH 31412-6500 RING SEAL (FOR 31404 SERIES) 7 - CIRCUIT SIZE 6, WITH 31412-6501 RING SEAL (FOR 31404 SERIES) - SAE 22 AWG TO 18 AWG PER ESB-M1L123-A2 - ISO 0.35MM2 TO 0.75MM2 PER GMW15626 AND ES-AU5T-1A348-AA g. POLARIZATION FEATURE EFFECTIVENESS PER USCAR-2 PARAGRAPH 5.4.4 IS L REDUCED WHEN TESTING ALL POLARIZATION OPTIONS: 100N MIN. D h. SEE SHEET #3 FOR CONNECTOR ASSEMBLY WITH CLIPSLOP TERMINAL OPTION 2 - TYCO/MOLEX GET 0.64 3 - MOLEX 0.64 4 - YAZAKI KAIZEN 0.64/TE GEN Y 0.64/JST AIT 0.64 i. FOR CLIPSSLOT CONNECTOR: CLIP OVERHANGS CONNECTOR, PLEASE CHECK APPLICATION T6 ADD P/N: 31404-7124, 31404-7134, 31404-7205, 31404-7215, 31404-7803, 31404-7813 T5 ADD P/N: 31404-7123; 31404-7133; 31404-7902; 31404-7912 T4 ADD P/N:31402-2120,31402-2130,31402-3104,31402-3114,31402-6201,31402-6211, 31402-6301,31402-6311,31402-6401,31402-6411,31402-6501,31402-6511, 31402-6601,31402-6611,31402-6701,31402-6711,31403-6201,31403-6211, 31403-6301,31403-6311,31403-6401,31403-6411,31403-9501,31403-6511, 31403-6601,31403-6611,31403-6701,31403-6711,31404-6201,31404-6211 (COULD CAUSE WIRE CHAFING)-SHORTER CLIP IS A RECOMMENDATION. T2 T1 T S R P M 2. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN C ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. 1X6 b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. SYMBOLS THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, = 0 AND CUSTOMER MATERIAL NUMBER. B f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). = 0 g. DATE CODE: FIRST TWO DIGITS ARE THE CALENDAR YEAR (EXAMPLE: 04 = 2004). THIRD = 0 1X8 A FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 SCALE mm 1:1 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 DOCUMENT STATUS DIMENSION UNITS ± = 0 UPDATE BOM INFORMATION ON SHEET 9 DELETE 31402/31403-7*** P/N ADD P/N 3140*-7XXXX FOR 1X6 WITH 31412-6501 RING SEAL VERSION ON SHEET 9 ADD P/N: 31402-6131; 31402-6121 ADD P/N: 31404-3112; 31404-3102 C ADD P/N: 31403-3132; 31403-3122 ADD P/N: 31402-6118; 31402-6108 1. REDRAW SALES DRAWING L 2. UPDATE TERMINAL INFORMATION FOR 31404 SERIES 3. ADD P/N: 31403-6212; 31403-6202 REV REV DESCRIPTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ANGULAR TOL THROUGH 5TH DIGIT DAY # OF THE CALENDAR YEAR (EXAMPLE: FEB. 3RD = '034'). D 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 1 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L L DATE CODE SEE NOTE 2g CONNECTOR ASSEMBLY K WITHOUT CLIPSLOT XXXXX-XXXX XXXXX MOLEX P/N K LASER MARKING APPLIED TO THIS SURFACE J SECTION A-A SECTION A-A TPA SHOWN IN AS-SHIPPED PRE-LOCKED POSITION SEE NOTE 1c TPA SHOWN IN FINAL LOCKED POSITION J 6 CPA (OPTIONAL) BOTTOM VIEW H H 1 4 G 2 CONNECTOR HOUSING MATTE SEAL G TERMINAL HOUSING (MIN. PASS-THRU DIA. SEE CHART ON SHEET 6) F 5 3 F PERIPHERAL SEAL TPA XX 18.70±0.35 E E 3 DIM. A±0.30 SEE CHART MANUFACTURING LOCATION ID 29.90±0.30 CIRCUIT ID RIGHT SIDE VIEW D D BACK VIEW ITEM DESCRIPTION COLOR MATERIAL 1 CONNECTOR HOUSING SEE CHART PBT GF15 2 TERMINAL HOUSING BLACK SPS/PA66 GF30 3 TPA NATURAL SPS/PA66 GF20 4 MATTE SEAL SEE CHART SILICONE RUBBER 5 PERIPHERAL SEAL SEE CHART SILICONE RUBBER 6 CPA - OPTIONAL RED PBT GF30 C SYMBOLS = 0 = 0 B = 0 A FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 SCALE mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 2 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L L CONNECTOR ASSEMBLY DATE CODE SEE NOTE 2g K WITH CLIPSLOT XXXXX-XXXX XXXXX MOLEX P/N K J J LASER MARKING APPLIED TO THIS SURFACE 6 SECTION C-C H CPA (OPTIONAL) SECTION C-C TPA SHOWN IN AS-SHIPPED H TPA SHOWN IN FINAL PRE-LOCKED POSITION LOCKED POSITION SEE NOTE 1c 1 CONNECTOR HOUSING BOTTOM VIEW G 4 2 F 5 G MATTE SEAL TERMINAL HOUSING F PERIPHERAL SEAL 3 TPA C (MIN. PASS-THRU DIA. SEE CHART 1 E (2.13) E ON SHEET 7) 21.43±0.35 (2.13) -B- D D CIRCUIT ID 3 C 29.90±0.30 2 DIM A±0.30 C BACK VIEW RIGHT SIDE VIEW SEE CHART ITEM DESCRIPTION COLOR MATERIAL 1 CONNECTOR HOUSING SEE CHART PBT GF15 2 TERMINAL HOUSING BLACK SPS/PA66 GF30 3 TPA NATURAL SPS/PA66 GF20 4 MATTE SEAL SEE CHART SILICONE RUBBER 5 PERIPHERAL SEAL SEE CHART SILICONE RUBBER 6 CPA - OPTIONAL RED PBT GF30 C FRONT VIEW SYMBOLS POLARIZATION A = 0 = 0 B = 0 FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 3 OF 9 1 A 19 18 17 16 15 14 13 12 11 1X2 10 9 7 8 5 6 4 1X3 3 2 1 1X4 A L L (2.00) (1.65) (2.00) (1.65) K K (2.00) J (2.00) POLARIZATION A A J POLARIZATION A FRONT VIEW POLARIZATION A H (0.25) (2.65) (2.00) H (0.90) G G POLARIZATION B POLARIZATION B F F (2.65) (2.00) (0.25) (0.90) E E POLARIZATION C POLARIZATION C D D (0.25) �0.10� �0.10� (0.25) C POLARIZATION D C POLARIZATION D SYMBOLS = 0 = 0 B = 0 KEY CONFIGURATIONS FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 4 OF 9 1 A 19 18 17 16 15 14 13 12 11 9 7 8 5 6 4 3 2 1 1X8 1X6 1X5 L 10 L (2.00) (2.00) (2.00) (2.00) (2.00) (2.00) K K POLARIZATION A POLARIZATION A POLARIZATION A J J (2.00) (0.25) (0.25) (2.00) H H POLARIZATION B POLARIZATION B G G (2.00) (0.25) (0.25) F F (2.00) POLARIZATION C POLARIZATION C E E (0.25) D D (0.25) (0.25) C C (0.25) POLARIZATION D POLARIZATION D SYMBOLS = 0 = 0 B = 0 KEY CONFIGURATIONS FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 5 OF 9 1 A 19 L K J H G F 18 17 D C B CLIPSLOT OPTION 15 MATTE SEAL COLOR 14 PERIMETER SEAL COLOR 13 WIDTH DIM (A) 12 FEMALE TERMINAL SUPPLIER 11 10 USCAR FOOTPRINT DRAWING NO. 9 PART NUMBER WITHOUT CPA PART NUMBER WITH CPA 31402-2100 31402-2110 A BLACK 31402-2120 31402-2130 A GRAY 31402-2200 31402-2210 B GRAY 31402-2300 31402-2310 C BROWN 31402-2400 31402-2410 D GREEN 31402-2500 31402-2510 B BLACK 31402-2600 31402-2610 C BLACK 31402-2700 31402-2710 D BLACK TOOLED TOOLED 31403-2000 31403-2010 D DK. GRAY TOOLED 31403-2100 31403-2110 A BLACK TOOLED 31403-2200 31403-2210 B GRAY 31403-2300 31403-2310 C BROWN 31403-2400 31403-2410 31403-2500 31403-2510 D B 31403-2600 31403-2610 C BLACK 31403-2700 31403-2710 D BLACK TOOLED TOOLED 31403-2800 31403-2810 C NATURAL TOOLED 31403-2900 31403-2910 D TOOLED 31404-2100 A NOT TOOLED 31404-2200 31404-2110 31404-2210 GRAY BLACK B GRAY NOT TOOLED 31404-2300 31404-2310 C BROWN 31404-2400 31404-2410 D GREEN 31404-2500 31404-2510 B BLACK 31404-2600 31404-2610 C BLACK NOT TOOLED NOT TOOLED 31404-2700 31404-2710 D BLACK NOT TOOLED 31402-3100 31402-3110 A BLACK TOOLED 31402-3200 31402-3210 B GRAY TOOLED 31402-3300 31402-3310 C BROWN 31402-3400 31402-3410 GREEN 31402-3500 31402-3510 D B BLACK TOOLED 31402-3600 31402-3700 31402-3610 C BLACK TOOLED D BLACK TOOLED 31403-3000 31402-3710 31403-3010 D DK. GRAY TOOLED 31403-3100 31403-3110 A BLACK TOOLED 31403-3200 31403-3210 B GRAY TOOLED 31403-3300 31403-3310 C BROWN TOOLED, COLOR UNAVAILABLE 31403-3400 31403-3410 31403-3500 31403-3510 31403-3610 NO NO ROW/ CIRCUITS 1X2 1X3 KEY* D B ROYAL BLUE BLUE CONNECTOR COLOR MIN. PASS THRU DIA. RUST RED 16.88 MOLEX 0.64 064-S-002-1-Z02 L L TOOLED J L NOT TOOLED H NOT TOOLED TOOLED, COLOR UNAVAILABLE TYCO OR MOLEX GET 0.64 18.70 (22.00) MOLEX 0.64 G TOOLED, COLOR UNAVAILABLE 064-S-003-1-Z01 L F TOOLED, COLOR UNAVAILABLE TOOLED TOOLED 31403-3800 31404-3100 31403-3810 31404-3110 C NATURAL TOOLED A BLACK TOOLED 31404-3200 31404-3210 B GRAY TOOLED 31404-3300 31404-3310 C BROWN 31404-3400 31404-3410 D GREEN 31404-3500 31404-3510 B BLACK 31404-3600 31404-3610 C BLACK 31404-3700 31404-3710 D BLACK TOOLED 31402-4100 31402-4110 A BLACK NOT TOOLED 31402-4200 31402-4210 B GRAY NOT TOOLED 31402-4300 31402-4310 C BROWN NOT TOOLED 31402-4400 31402-4410 D GREEN 31402-4500 31402-4510 B BLACK NOT TOOLED 31402-4600 31402-4610 C BLACK NOT TOOLED 31402-4700 D BLACK NOT TOOLED 31403-4100 31402-4710 31403-4110 A BLACK 31403-4200 31403-4210 B GRAY NOT TOOLED NOT TOOLED 31403-4300 31403-4310 C BROWN NOT TOOLED 31403-4400 31403-4410 31403-4500 31403-4510 31403-4600 31403-4610 31403-4700 31404-4100 B K TOOLED, COLOR UNAVAILABLE YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 BLACK GREEN T4 TOOLED, COLOR UNAVAILABLE BLACK TBD L E TOOLED, COLOR UNAVAILABLE TOOLED, COLOR UNAVAILABLE YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 TOOLED TOOLED TYCO OR MOLEX GET 0.64 21.25 (22.34) MOLEX 0.64 D NOT TOOLED 064-S-004-1-Z02 C NOT TOOLED BLACK NOT TOOLED C BLACK NOT TOOLED 31403-4710 31404-4110 D A BLACK BLACK NOT TOOLED NOT TOOLED 31404-4200 31404-4210 B GRAY NOT TOOLED 31404-4300 31404-4310 C BROWN NOT TOOLED 31404-4400 31404-4410 D GREEN 31404-4500 31404-4510 B BLACK 31404-4600 31404-4610 C BLACK NOT TOOLED 31404-4700 31404-4710 D BLACK NOT TOOLED YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 SYMBOLS = 0 = 0 NOT TOOLED = 0 NOT TOOLED A FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 SCALE mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 P1 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 DOCUMENT STATUS 1 TOOLED (20.80) D TBD 2 TOOLED, COLOR UNAVAILABLE TOOLED 31403-3710 D 3 TOOLED, COLOR UNAVAILABLE TYCO OR MOLEX GET 0.64 TOOLED 1X4 4 TOOLED BLACK NO 5 L TOOLED，BUT NOT VALIDATED GREEN GREEN 6 TOOLED BLACK LIGHT BLUE 7 8 STATUS C 31403-3600 31403-3700 E 16 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 6 OF 9 1 A 19 18 L 17 PART NUMBER WITHOUT CPA K J H G F E 16 PART NUMBER WITH CPA OPTION ROW/ CIRCUITS KEY* 13 MATTE PERIMETER SEAL SEAL COLOR COLOR 12 CONNECTOR COLOR WIDTH DIM (A) MIN. PASS THRU DIA. 11 FEMALE TERMINAL SUPPLIER 10 9 NOT TOOLED 31402-5200 31402-5210 B GRAY 31402-5300 31402-5310 C BROWN NOT TOOLED NOT TOOLED 31402-5400 31402-5410 GREEN 31402-5500 31402-5510 D B BLACK NOT TOOLED 31402-5600 31402-5610 C BLACK NOT TOOLED 31402-5700 31402-5710 D BLACK NOT TOOLED 31403-5100 31403-5110 A BLACK NOT TOOLED 31403-5200 31403-5210 B GRAY NOT TOOLED 31403-5300 31403-5310 C BROWN NOT TOOLED 31403-5400 31403-5410 GREEN 31403-5500 31403-5510 D B 31403-5600 31403-5700 31403-5610 C BLACK NOT TOOLED D BLACK 31404-5100 31403-5710 31404-5110 A BLACK NOT TOOLED NOT TOOLED 31404-5200 31404-5210 B GRAY NOT TOOLED 31404-5300 31404-5310 C BROWN 31404-5400 31404-5410 D GREEN 31404-5500 31404-5510 B BLACK 31404-5600 31404-5610 C BLACK NOT TOOLED 31404-5700 31404-5710 D BLACK NOT TOOLED 31402-6100 31402-6110 A BLACK 31402-6200 31402-6210 B GRAY 31402-6300 31402-6310 C BROWN 31402-6400 31402-6500 D B GREEN BLACK 31402-6600 31402-6410 31402-6510 31402-6610 C BLACK TOOLED 31402-6700 31402-6710 D BLACK TOOLED 31403-6100 31403-6110 A BLACK 31403-6200 31403-6210 B GRAY TOOLED TOOLED 31403-6300 31403-6310 C BROWN 31403-6400 31403-6500 31403-6410 31403-6510 31403-6600 31403-6610 C BLACK TOOLED 31403-6700 31403-6710 D BLACK TOOLED 31404-6100 31404-6110 A BLACK TOOLED 31404-6200 31404-6210 B GRAY TOOLED 31404-6300 31404-6310 C BROWN 31404-6400 31404-6410 31404-6500 31404-6510 D B GREEN BLACK 31404-6600 31404-6610 C BLACK 31404-6700 31404-6710 D BLACK TOOLED 31404-6800 31404-6810 C NATURAL TOOLED PART NUMBER WITH CPA NO CLIPSLOT OPTION 1X6 ROW/ CIRCUITS D B KEY* TBD TBD ROYAL BLUE MATTE SEAL COLOR LIGHT BLUE PERIMETER SEAL COLOR 23.80 BLACK (24.28) NOT TOOLED TYCO OR MOLEX GET 0.64 TOOLED, COLOR UNAVAILABLE TOOLED 26.33 (26.82) MOLEX 0.64 064-S-006-1-Z02 TOOLED, COLOR UNAVAILABLE TOOLED TOOLED, COLOR UNAVAILABLE TOOLED YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 WIDTH DIM (A) MIN. PASS THRU DIA. FEMALE TERMINAL SUPPLIER TOOLED USCAR FOOTPRINT DRAWING NO. D 31402-8300 31402-8310 C BROWN NOT TOOLED 31402-8400 31402-8500 31402-8410 31402-8510 D B GREEN BLACK 31402-8600 31402-8610 C BLACK NOT TOOLED NOT TOOLED 31402-8700 31402-8710 D BLACK NOT TOOLED 31403-8100 31403-8110 A BLACK NOT TOOLED 31403-8200 31403-8210 B GRAY 31403-8300 31403-8310 NOT TOOLED NOT TOOLED 31403-8400 31403-8500 31403-8410 31403-8510 31403-8600 TYCO OR MOLEX GET 0.64 31.25 (31.90) MOLEX 0.64 NOT TOOLED 064-S-008-1-Z02 GREEN BLACK 31403-8610 C BLACK NOT TOOLED 31403-8700 31403-8710 D BLACK NOT TOOLED 31404-8100 31404-8110 A BLACK 31404-8200 31404-8210 B LT. GRAY 31404-8400 31404-8410 D TBD C NOT TOOLED D B DK. GRAY E STATUS GRAY C F TOOLED, COLOR UNAVAILABLE B 31404-8310 G TOOLED, COLOR UNAVAILABLE 31402-8210 31404-8300 H TOOLED TOOLED, COLOR UNAVAILABLE 31402-8200 BROWN J NOT TOOLED NOT TOOLED NOT TOOLED TBD K NOT TOOLED YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 BLACK TBD SYMBOLS NOT TOOLED = 0 = 0 = 0 INFORMATION REFER TO REFER TO SD-31404-811 L SD-31404-811 A FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 SCALE mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 P1 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 DOCUMENT STATUS 1 NOT TOOLED A C 2 NOT TOOLED 064-S-005-1-Z02 31402-8110 1X8 3 NOT TOOLED 31402-8100 NO 4 TOOLED GREEN BLACK CONNECTOR COLOR TYCO OR MOLEX GET 0.64 MOLEX 0.64 5 STATUS BLACK 1X5 6 L USCAR FOOTPRINT DRAWING NO. A NO 7 8 31402-5110 D B CLIPSLOT 14 31402-5100 PART NUMBER WITHOUT CPA C 15 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 7 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 ADDITIONAL CAVITY PLUG CONFIGURATIONS: L ROW/ CIRCUITS L MOLEX P/N WITH CPA FEMALE TERMINAL MOLEX P/N WITHOUT CPA KEY OPTION CLIPSLOT OPTION CIRCUIT NUMBER: "0" INDICATED PLUG LOCATION COLOR 1 K TYCO/MOLEX GET J H MOLEX 0.64 1X6 G NO NO NO NO NO NO BLACK BLACK BLACK BLACK BLACK BLACK NO NO NO YES NO NO BLACK BLACK BLACK BLACK GRAY BROWN C A NO NO NO NO 31403-6100 31403-6101 31403-6102 31403-6103 31403-6104 A NO 31403-6201 B NO NO NO NO NO 31403-6212 31403-6202 B NO GRAY 31403-6311 31403-6301 31403-6401 31403-6501 31403-6601 C 31403-6701 D NO NO NO NO NO BROWN GREEN BLACK BLACK BLACK 31404-6100 31404-6101 31404-6102 31404-6103 31404-6106 31404-6107 31404-6108 31404-6109 31404-6122 31404-6201 31404-6203 31404-6204 31404-6802 31402-3103 31402-3104 31403-3122 31404-3102 A NO NO NO BLACK BLACK BLACK NO NO NO NO NO NO NO NO NO NO NO NO NO NO BLACK BLACK BLACK BLACK BLACK BLACK GRAY GRAY 31402-6110 31402-6111 31402-6112 31402-6113 31402-6114 31402-6100 31402-6101 31402-6102 31402-6103 31402-6104 A 31402-6115 31402-6105 A 31402-6118 31402-6119 31402-6131 31402-6150 31402-6211 31402-6108 31402-6109 31402-6121 31402-6140 31402-6201 A 31402-6311 31402-6301 C 31402-6411 31402-6401 D 31402-6511 31402-6611 31402-6501 31402-6601 B 31402-6711 31402-6701 31403-6110 31403-6111 31403-6112 31403-6113 31403-6114 31403-6211 31403-6411 31403-6511 31403-6611 31403-6711 F YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 E 1X3 TYCO/MOLEX GET MOLEX 0.64 YAZAKI KAIZEN 0.64, TE GEN Y 0.64,JST AIT 0.64 D 31404-6110 31404-6111 31404-6112 31404-6113 31404-6116 31404-6117 31404-6118 31404-6119 31404-6132 31404-6211 31404-6213 31404-6214 31404-6812 31402-3113 31402-3114 31403-3132 31404-3112 A A A A A A A B A A A A D B C A A A A A A A A B B B C A A A A 2 0 0 0 0 0 0 0 4 3 0 0 0 0 TOTAL CIRCUITS PLUGGED 5 STATUS 6 0 0 0 0 0 0 6 2 1 4 TOOLED 3 TOOLED TOOLED TOOLED TOOLED K TOOLED TOOLED 0 0 0 0 0 0 1 1 1 0 6 0 0 0 0 0 0 6 TOOLED T4 GREEN BLACK BLACK 0 0 0 0 0 0 6 TOOLED T4 0 0 0 0 0 0 0 0 0 0 0 0 6 6 TOOLED T4 TOOLED T4 BLACK 0 0 0 0 0 0 6 0 TOOLED T4 0 6 TOOLED TOOLED BLACK BLACK BLACK BLACK BLACK GRAY GRAY NATURAL BLACK BLACK GRAY BLACK 0 0 0 0 0 0 0 0 0 0 0 TOOLED H 0 0 0 0 0 3 TOOLED 0 0 0 0 0 0 0 0 0 0 0 0 6 6 6 6 TOOLED T4 TOOLED T4 TOOLED T4 TOOLED T4 0 0 0 6 TOOLED T4 TOOLED 0 0 6 2 2 1 3 1 3 1 6 2 1 3 1 1 1 1 TOOLED 0 0 0 0 0 0 0 0 0 0 0 J 0 0 0 0 0 0 0 T4 0 0 0 0 0 0 0 TOOLED TOOLED 0 0 0 0 0 0 0 S 0 0 0 0 TOOLED 1 4 2 6 0 0 0 TOOLED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TOOLED TOOLED TOOLED T4 G TOOLED TOOLED F TOOLED TOOLED TOOLED TOOLED TOOLED TOOLED TOOLED T4 E TOOLED TOOLED TOOLED TOOLED TOOLED OK TO TOOL T4 P R D C C SYMBOLS = 0 = 0 B = 0 FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 8 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 L L PART NUMBER WITHOUT CPA K J PART NUMBER WITH CPA CLIPSLOT OPTION ROW/ CIRCUITS KEY* MATTE PERIMETER SEAL SEAL COLOR COLOR CONNECTOR COLOR WIDTH DIM (A) FEMALE TERMINAL SUPPLIER MIN. PASS THRU DIA. USCAR FOOTPRINT DRAWING NO. STATUS 31404-7100 31404-7110 A BLACK TOOLED 31404-7200 31404-7210 B GRAY TOOLED 31404-7300 31404-7310 C TOOLED, COLOR UNAVAILABLE BROWN ROYAL BLUE LIGHT BLUE TOOLED, COLOR UNAVAILABLE TOOLED 31404-7400 31404-7410 31404-7500 31404-7510 D B 31404-7600 31404-7610 C BLACK 31404-7700 31404-7710 D BLACK TOOLED 31404-7800 31404-7810 C NATURAL TOOLED NO 1X6 GREEN BLACK K 26.33 (26.82) 064-S-006-1-Z02 YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 TOOLED J H H ADDITIONAL CAVITY PLUG CONFIGURATIONS: ROW/ CIRCUITS MOLEX P/N WITH CPA FEMALE TERMINAL MOLEX P/N WITHOUT CPA KEY CLIPSLOT OPTION OPTION CIRCUIT NUMBER: "0" INDICATED PLUG LOCATION COLOR 1 31404-7110 31404-7111 31404-7112 31404-7113 31404-7116 31404-7117 31404-7118 31404-7119 31404-7132 31404-7133 31404-7134 31404-7213 31404-7214 31404-7215 31404-7812 31404-7813 31404-7912 G 1X6 YAZAKI KAIZEN 0.64 TE GEN Y 0.64 JST AIT 0.64 F E 31404-7100 31404-7101 31404-7102 31404-7103 31404-7106 31404-7107 A 31404-7108 31404-7109 31404-7122 31404-7123 31404-7124 31404-7203 31404-7204 31404-7205 31404-7802 31404-7803 31404-7902 A A A A A A A A A A B B B C C D NO NO NO BLACK BLACK BLACK NO NO NO NO NO NO NO NO NO NO NO NO NO NO BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK GRAY GRAY GRAY NATURAL NATURAL GRAY 0 2 0 3 0 4 0 5 0 TOTAL CIRCUITS PLUGGED 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 STATUS 0 0 0 0 TOOLED 6 2 2 1 3 1 3 1 1 2 2 1 1 3 1 1 TOOLED G TOOLED TOOLED TOOLED TOOLED TOOLED TOOLED F TOOLED TOOLED TOOLED TOOLED TOOLED TOOLED TOOLED TOOLED TOOLED T5 T6 T6 T6 E T5 D D C C SYMBOLS = 0 = 0 B = 0 FORMAT: master-tb-prod-D REVISION: H DATE: 2018/01/18 19 P1 18 RELEASE DATE 17 2018/09/25 16 08:02:33 C 15 14 13 12 11 10 9 8 mm 1:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.13 1 PLACE ± 0.3 0 PLACES ± = 0 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS SCALE ANGULAR TOL = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 B EC NO: 604522 DRWN: PZHANG71 CHK'D: GLI04 APPR: JDENG02 INITIAL REVISION: DRWN: RCARLSON APPR: PBERG THIRD ANGLE PROJECTION 5 0.64 USCAR CONNECTOR SEALED SINGLE ROW ASSEMBLY 2018/09/10 2018/09/21 2018/09/25 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/03/01 2004/09/30 DRAWING SERIES D-SIZE 31402 4 SD-31402-211 MATERIAL NUMBER PSD 001 SHEET NUMBER CUSTOMER GENERAL MARKET 3 T6 2 9 OF 9 1 A