330123002

12 11 10 9 7 8 5 6 4 3 2 1 3.63±0.07 33 H H STAMP PLATING TYPE 34 Sn-TIN, Au-GOLD OR 6.45±0.15 TSC SCALE 2:1 Ag-SILVER IN THIS 18 20.45±0.25 AREA G DIMENSIONS FOR LARGE POLARIZATION RIB TERMINAL ONLY 69 2X 3.75 (BEFORE COIN) A G 39 2X 7.50±0.15 B A C 5 B F C NOTES: (UNLESS OTHERWISE SPECIFIED) E 48 FOR M3 GRIP CODE 2. MATERIAL: ASTM B422, UNS C19025, HR04 THICKNESS: 0.30 mm ±0.01 TEMPER: FULL HARD (REF) TENSILE: 496 MIN MPA 11 2.55 SECTION B-B 40 16 3.33±0.07 A 41 19 2.80±0.07 5. SILVER PLATED TERMINAL FINISH OVERALL UNDERPLATE ELECTRODEPOSITED DUCTILE SULFAMATE NICKEL CONTACT AREA - ELECTRODEPOSITED PURE SILVER (0.5% MAX IMPURITIES) SEMI-BRIGHT FINISH - SILVER ANTI-TARNISH : EVABRITE GRIP AREA - ELECTRODEPOSITED 100% TIN MATTE FINISH E 9.95 4. GOLD PLATED TERMINAL FINISH OVERALL UNDERPLATE ELECTRODEPOSITED DUCTILE SULFAMATE NICKEL CONTACT AREA - ELECTRODEPOSITED GOLD GRIP AREA - ELECTRODEPOSITED 100% TIN MATTE FINISH 42 6.80±0.15 TSC 0.80±0.05 22 D 15 ⌀C (0.3) SECTION C-C SECTION A-A 6. MEETS PERFORMANCE SPECIFICATION FOR CABLE TO TERMINAL ELECTRICAL CRIMPS PER SAE/USCAR-21 (8/2001) SCALE 5:1 CARRIER BUMP DIRECTION 7. MEETS PERFORMANCE STANDARD FOR AUTOMOTIVE ELECTRICAL CONNECTOR SYSTEMS FOR SAE/USCAR-2, REV. 4 (TEMP CLASS 3) (5/2004) C 4 ⌀D SCALE 5:1 6.58 ±0.15 CONTACT POINT TERMINAL 3. TIN PLATED TERMINAL FINISH: OVERALL UNDERPLATE ELECTRODEPOSITED NICKEL OVERALL ELECTRODEPOSITED REFLOW TIN D B SEE SHEET 5 1. MATING TERMINAL SHOWN ON SD-33000-001 2X 2.0 38 F POINTS DOWN FOR TIN PLATED TERMINALS C POINTS UP FOR PRECIOUS PLATED TERMINALS 8. MEETS ELECTRICAL CONNECTION SYSTEM DESIGN SPECIFICATION (SDS) REV.11 (5/2002) 9. MEETS FIELD CORRELATED LIFE TEST (FCLT) PER SAE/USCAR-20 (6/2004) 10. MEETS WIRING COMPONENT DESIGN GUIDLINES SAE/USCAR-12 REV 2 (12/2001) 11. TSC ON A DIMENSION TO BE INTERPRETED AS DISTANCE TO A THEORETICAL SHARP CORNER AS IF THE RADIUS WERE NOT PRESENT B (10.67) PROGRESSION B 12. REFERENCE 97BG-14474-AAB FOR LARGE POLARIZATION RIB CAVITY SPECIFICATION SYMBOLS 13. INSERTION FORCE (TIN) AVG. FROM PV TESTING = 3.8N LARGE POLARIZATION RIB 3.5N SMALL POLARIZATION RIB (REFERENCE) = 0 = 0 14. ALL DIMENSIONS EXCEPT 33 , 34 , 41 & 42 ARE COMMON TO BOTH SMALL AND LARGE POLARIZATION RIB TERMINALS = 0 15. REFERENCE PK-31300-516 FOR REEL DIRECTION 16. REFERENCE AS-33012-002 FOR CRIMP INFORMATION A P1 RELEASE DATE 11 2020/03/06 10 02:34:09 C 9 8 7 6 mm 4:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.10 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: BMOSER THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 MX150 RECEPTACLE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/06/21 2005/06/22 DRAWING SERIES C-SIZE 33012 3 SD-33012-002 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C2 SHEET NUMBER 1 OF 5 1 A 12 11 10 9 GENDER FAMILY 7 8 SEALING PLATING H RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) 33001-3005 LEFT (D) 33001-2006 33001-3006 33001-4001 33001-5001 33001-4002 33001-5002 33001-4003 33001-5003 33001-4005 33001-5005 RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) LARGE POLARIZATION RIB - NOT TO BE USED IN MX150 SEALED CONNECTORS 33012-2021 33012-3021 33012-2022 Sn 33012-3022 33012-2023 33012-3023 33001-2021 33001-3021 33001-2022 MX150 RECEPTACLE UNSEALED Au 33001-3022 33001-2023 33001-3023 33001-4021 33001-5021 33001-4022 Ag 33001-5022 33001-4023 33001-5023 RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) G MX150 RECEPTACLE Au MAT SEAL F Ag D C PAYOFF DIRECTION 33012-2001 33012-3001 33012-2002 33012-3002 33012-2003 33012-3003 33012-2004 33012-3004 33001-2003 33001-3003 33001-2004 33001-3004 33001-2005 Sn E PART NUMBER 7.40 MIN 5 6 GRIP CODE 4 * WIRE SIZES 3 2 A ±0.30 B ±0.30 C ±0.30 D ±0.30 14 16/14AWG 1.25-2.00mm² 3.9 4.4 1.7 1.6 18 20/18AWG 0.75-1.00mm² 3.3 3.1 1.3 1.4 1 SPECIAL CHARACTERISTICS H HIGH PERFORMANCE Sn 22 22AWG 2.5 2.6 0.9 M3 0.35-0.50mm² 2.5 2.7 0.9 14 16/14AWG 1.25-2.00mm² 3.9 4.4 1.7 1.6 18 20/18AWG 0.75-1.00mm² 3.3 3.1 1.3 1.4 1.0 1.54 ±0.1 G HIGH PERFORMANCE Au 22 22AWG 2.5 2.6 0.9 1.0 1.54 M3 0.35-0.50mm² 2.5 2.7 0.9 14 16/14AWG 1.25-2.00mm² 3.9 4.4 1.7 1.6 18 20/18AWG 0.75-1.00mm² 3.3 3.1 1.3 1.4 22AWG 2.5 2.6 0.9 2.5 2.7 0.9 22 M3 ±0.1 F HIGH PERFORMANCE Ag 0.35-0.50mm² 1.0 1.54 ±0.1 E 14 16/14AWG 1.25-2.00mm² 3.9 4.4 1.7 1.6 18 20/18AWG 0.75-1.00mm² 3.3 3.1 1.3 1.4 22 22AWG 0.35-0.50mm² 2.5 2.6 0.9 1.0 14 16/14AWG 1.25-2.00mm² 3.9 4.4 1.7 1.6 18 20/18AWG 0.75-1.00mm² 3.3 3.1 1.3 1.4 22 22AWG 0.35-0.50mm² 2.5 2.6 0.9 1.0 14 16/14AWG 1.25-2.00mm² 3.9 4.4 1.7 1.6 18 20/18AWG 0.75-1.00mm² 3.3 3.1 1.3 1.4 22AWG 0.35-0.50mm² 2.5 22 HIGH PERFORMANCE Sn D HIGH PERFORMANCE Au HIGH PERFORMANCE Ag C 2.6 0.9 1.0 * REFERENCE AS-33012-002 FOR SPECIFIC WIRE TYPES 1.00 2.70±0.05 4.75 G 3.45±0.05 B B SYMBOLS 2.95±0.07 = 0 = 0 HOUSING A G GROMMET CAP GROMMET SEAL SECTION G-G = 0 GROMMET CAP OPENING GROMMET SEAL / CAP CONFIGURATION TO MODIFY LARGE POLARIZATION RIB CAVITY TO ACCEPT SMALL POLARIZATION RIB APPLICATIONS DOCUMENT STATUS 12 P1 RELEASE DATE 11 2020/03/06 10 C 9 8 7 6 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: mm ± = 0 02:34:09 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.10 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: BMOSER THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 MX150 RECEPTACLE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/06/21 2005/06/22 DRAWING SERIES C-SIZE 33012 3 SD-33012-002 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C2 SHEET NUMBER 2 OF 5 1 A 12 11 10 9 7 8 5 6 4 3 2 1 H H THIS CHECKING - AID IS FOR SMALL POLARIZATION RIB TERMINALS ONLY 2X ⌀NO. 8-32 THD X .75 DP. F.F.S. G G SEE DETAIL A 11.370 THRU. 25.40 20.32 12.70 EDM 14.030 THRU. CHECKING - AID ASSEMBLY SCALE 1:1 BREAK SHARP EDGES (R0.05) (2.66) THRU. F F 30° 5.08 0.00 14.140 THRU. 27.20 17.45 S.C. 0.00 10.730 45° X 0.20 CONSTANT 8X 45° X 0.02 8X 45° X 0.20 (2.80) 20.32 2X DRILL THRU AND COUNTERBORE FOR NO. 8 S.H.C.S. F.F.S. 0.48° INCLUDED DRAFT D DETAIL A SCALE 5:1 25.40 E R0.20 (6) THRU. 11.302 DRAFT 12.240 13.160 14.098 DRAFT CNC TEXT AS SHOWN 25.40 20.32 12.70 (11.302) S.C. (14.098) S.C. E 5.08 0.00 (2.88) THRU. 11.260 THRU. PUNCHES 5.08 D KNOCKDOWN (ADJUST TO MAINTAIN STRAIGHT CRIMP) 25.40 5.08 0.00 10.35 S.C. 20.32 0.00 CRIMP REQUIREMENTS: 1. CRIMP STRAIGHTNESS MUST BE MAINTAINED USE A KNOCKDOWN TOOL LOCATED AS SHOWN TERMINAL BOX MUST NOT BE DEFORMED TERMINAL 1.00 0.00 SUPPORT TERMINAL HERE ANVILS 0.00 14.9 10.5 0.00 C 2. AFTER CRIMPING, THE CRIMPED TERMINAL (AND UP TO 5 mm OF WIRE PAST THE INSULATOR CUTOFF TAB) MUST FIT FREELY INTO THE CHECKING-AID SHOWN ON THIS PAGE 3. FOR OTHER MECHANICAL REQUIREMENTS ON CRIMPED TERMINALS, REFER TO SAE/USCAR-21 (5-13-02) SECTIONS 4.2 (VISUAL INSPECTION), 4.2 (CROSS SECTION ANALYSIS) AND 4.4 (CONDUCTOR CRIMP PULLOUT FORCE) 6.35 CHECKING - AID UPPER C CHECKING - AID LOWER B B SYMBOLS UPPER & LOWER CHECKING-AID A2 TOOL STEEL HARDEN & GRIND ROCKWELL "C" 56-58 = 0 = 0 = 0 A P1 RELEASE DATE 11 2020/03/06 10 02:34:09 C 9 8 7 6 mm 2:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.10 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: BMOSER THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 MX150 RECEPTACLE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/06/21 2005/06/22 DRAWING SERIES C-SIZE 33012 3 SD-33012-002 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C2 SHEET NUMBER 3 OF 5 1 A 12 11 10 9 7 8 5 6 4 3 2 1 NOTES: UNLESS OTHERWISE SPECIFIED H H 20.10 1. TOLERANCES: LINEAR ±0.10 ANGULAR ±3° D 12.75 1.80 2.70 7.00 2. ALL DRAFT WITHIN TOLERANCE. 3. MAX RADII ON ALL CORNERS SHOWN SHARP: 0.10 1.05 1.30 4. MAX FLASH PERMISSIBLE: 0.1 5. EJECTOR PIN MARKS PERMISSIBLE IF FLUSH TO 0.25 BELOW SURFACE. 6. MATERIAL: HOUSING/FINGER SPECIFICATION ENGINEERED FOR MATERIAL WITH THE FOLLOWING PROPERTIES: A. FLEXURAL MODULUS = 4,500 TO 9,400 MPa PER ASTM TEST D790 B. ELONGATION AT YIELD = 2.3% OR BETTER PER ASTM TEST D638 TYPE V ⌀1.10±0.05 G D 1.25 0.60 SECTION D-D (0.80) G 7. CAVITY SPEC FOR USE ONLY WITH MOLEX RECEPTACLE TERMINAL PART NUMBERS SPECIFIED ELSEWHERE ON THIS DRAWING (22.55) 1.00 F 3.80 E ±0.15 1.90 F 1.80 0.85 3.74 1.94 1.25 LOCKUP 3.32 2.94 E 2.20 AT LOCKUP 2.25 5° E (10.56) E DETAIL Z SEE DETAIL Z SECTION E-E SCALE 20:1 RECEPTACLE HOUSING CAVITY TPA/INSERT CAVITY D FULL RADIUS TERMINAL CONTACT PROBE LOCATION (⌀0.64) SECTION F-F D SECTION D-D FOR LARGE POLARIZATION RIB APPLICATIONS FIG. 2 BLADE OPENING C D D F TERMINAL C F RECEPTACLE CAVITY ASSEMBLED VIEWS FOR SMALL POLARIZATION RIB APPLICATIONS FIG. 1 PROBING DOWN THE THROAT MUST USE THIS TERMINAL PROBE FOR PROBING INFORMATION REFERENCE MOLEX MX150 APPLICATION SPEC AS-33472-100 B B SYMBOLS PREFERRED PROBING LOCATION IS NOT ON SPRING MEMBER = 0 IF ELECTRICAL CONTINUITY PROBE TOUCHES SPRING MEMBER USE PROBING AS SHOWN IN FIG. 2 = 0 = 0 A P1 RELEASE DATE 11 2020/03/06 10 02:34:09 C 9 8 7 6 mm 5:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.10 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: BMOSER THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 MX150 RECEPTACLE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/06/21 2005/06/22 DRAWING SERIES C-SIZE 33012 3 SD-33012-002 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C2 SHEET NUMBER 4 OF 5 1 A 12 11 10 9 7 8 5 6 4 3 2 1 H H 18 ISO VIEW 20.45±0.25 G B SCALE 2:1 BB 69 81 2X 3.75 BEFORE COIN AA G AA CC 80 ⌀D F F SECTION BB-BB CC BB 76 A 2.20 E E 98 75 ⌀C SECTION CC-CC D D 0.30 101 0.15 100 CARRIER BUMP DIRECTION POINTS DOWN FOR TIN PLATED TERMINAL SECTION AA-AA M3 GRIP CODE TERMINAL C POINTS UP FOR PRECIOUS METAL PLATED TERMINAL C SEE TABLE (SHEET 2) FOR PART NUMBERS B B SYMBOLS = 0 = 0 = 0 A P1 RELEASE DATE 11 2020/03/06 10 02:34:09 C 9 8 7 6 mm 5:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.10 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 631014 DRWN: NVENKATESHSH CHK'D: ADHIR APPR: ADHIR INITIAL REVISION: DRWN: LPULLIAM APPR: BMOSER THIRD ANGLE PROJECTION 4 2019/05/11 2020/03/06 2020/03/06 MX150 RECEPTACLE TERMINAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2005/06/21 2005/06/22 DRAWING SERIES C-SIZE 33012 3 SD-33012-002 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 C2 SHEET NUMBER 5 OF 5 1 A