33471-0601

20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M TABLE OF CONTENTS L SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS 3-4 K DESCRIPTION 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 RECEPTACLE CONNECTOR ASSEMBLY 6 BACKSHELL NOTES 7 BACKSHELL 8 BACKSHELL CONFIGURATIONS MATING INTERFACE/CONNECTOR DRAWINGS DESCRIPTION DRAWING NO. MOLEX INLINE INTERFACE DEFINITION 1X2 PK-31300-635 1X2 *150-S-002-1-Z05 SD-33481-0001 1X6 PK-31300-903 1X6 *150-S-006-1-Z03 SD-33481-0001 L -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR KEY CONFIGURATIONS 5 PACKAGING NOTES: VALID UNLESS OTHERWISE SPECIFIED MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE OR CONNECTOR AS SPECIFIED IN THE MATING INTERFACE/CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT . K -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), J J TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: SEE PACKAGING CHART d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-301 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) H H 2. DESIGN - MATERIALS: 1x2 a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION SD-33471-0002 -UL V0 CONFIGURATION SD-160105-0002 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN G G ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. F F f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. E E D A1 A 2 UPDATE VIEWSETS LAST NUMBER: 11 1 INITIAL RELEASE REV REV DESCRIPTION REMOVED: C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B 1x6 DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 0 mm 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 ANGULAR TOL = A MINOR GEOMETRY CHANGE FOR UL V0 INSPECTION NUMBER LOG ADDED: 11 D UPDATED THE DRAWING FRAME 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSHI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 1 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION CONFIGURATIONS L L K K J J 1x2 - STD 1x2 - UL V0* H H G G F F E E D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = B 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 1x6 - UL V0* RELEASE DATE 18 2020/08/26 17 0 mm 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 ANGULAR TOL = A D *MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGUATION SEE NOTES 1 & 2 FOR MORE INFORMATION 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 2 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 SHEET DESCRIPTION M M KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J 35° 60° J H H KEY B 35° 60° G G F F KEY C 35° 35° E E D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 3 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M SHEET DESCRIPTION 1X6 KEY CONFIGURATIONS CONT. L L 60° 60° K K KEY A J J 30° 60° H H KEY B G G 30° 60° F F KEY C E E 30° 30° D D KEY D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 4 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 CHARTED DIMENSIONS SHEET DESCRIPTION DIMENSIONS DESCRIPTION RECEPTACLE CONNECTOR ASSEMBLY - STD M A 1X2 19.40 B C D E F 1.75 21.73 20.55 37.65 19.64 L L 1X6 32.75 1.75 35.21 19.90 37.65 N/A N/A 1.75 35.23 19.90 37.65 33.64 1X6 UL V0 *DIM F MAX. *APPLIE TO UL V0 CONFIGURATIONS ONLY K ⌀DIM C MIN PASS-THRU WITH NO CLEARANCE 11 LASER MARKING ON THIS SURFACE TERMINAL Z SEE NOTE 3g. K 2 POSITION 1 X J DIM D MAX J 3 H H 3.50 TYP Z LAST 4X DIM B DIM E MAX X 1 DIM A MAX 5 G TERMINAL POSITION G REAR VIEW (WIRE HARNESS SIDE) MOLD CAVITY I.D. F THIS LOCATION F RECYCLE CODE THIS LOCATION MANUFACTURING LOCATION CODE THIS LOCATION E E D D 2.75±0.50 6 C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION IN FINAL-LOCK POSITION SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 SECTION X-X 2020/08/26 17 15 14 13 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 5 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL NOTES L L BACKSHELL NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34951-001 -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-0001. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. K K -COMPONENTS ARE OPTIONAL AND MUST BE PURCHASED SEPERATELY. -BACKSHELL DESIGN IS OWNED BY SCHLEMMER. -FOR ADDITIONAL INFORMATION SEE THE BACKSHELL COMPONENT DRAWING SD-34949-0001. J J BACKSHELL (BKS) BACKSHELL CUSTOMER MODEL NUMBER LEGEND 34949-XXXX H H CUSTOMER MODEL COMPONENTS 0 - BACKSHELL ONLY 1 - BACKSHELL & MX150 HOUSING KEY A ASSEMBLY 2 - BACKSHELL & MX150 HOUSING KEY B ASSEMBLY 3 - BACKSHELL & MX150 HOUSING KEY C ASSEMBLY 4 - BACKSHELL & MX150 HOUSING KEY D ASSEMBLY 1X2 BACKSHELL FEATURES 1 - WITH RIBS 2 - WITHOUT RIBS G RECEPTACLE SEALED ASSEMBLY G MX150 CIRCUIT SIZE 02, 03, 04, 05, 06 F F E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 6 OF 8 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M SHEET DESCRIPTION BACKSHELL L L W K K J J W H H G G 11.00 1.50 F F 10.70 6.50 E E Partial W-W SCALE 4:1 D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 7 OF 8 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M SHEET DESCRIPTION CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS DESCRIPTION DIMENSIONS 1X2 G 26.00 L L K K J J (71.20) ⌀DIM G MIN PASS-THRU WITH NO CLEARANCE H H G G F F E E RECEPTACLE SEALED ASSEMBLY WITH RECEPTACLE BACKSHELL D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/08/26 17 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 0 1.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 07:23:52 16 0 mm ANGULAR TOL = B 0 15 14 13 12 11 10 9 8 7 EC NO: 643941 DRWN: XLDONG03 CHK'D: JDENG02 APPR: JDENG02 INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 2020/08/21 2020/08/26 2020/08/26 DRAWING 5 2015/11/04 2016/06/14 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-0001 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 A1 SHEET NUMBER CUSTOMER SEE NOTE 2a 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 RCPT SINGLE ROW SEALED ASSY MAT SEAL 2 8 OF 8 1 A 20 19 18 TABLE OF CONTENTS M SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 POLARIZATIONS 3 RCPT CONNECTOR ASSY 4 BOM SHEET 1 5 BOM SHEET 2 6 BOM SHEET 3 L 17 16 15 14 13 12 11 10 9 7 8 NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFIED IN DRAWING EWCAP 150-S-006-1-Z03, AVAILIBLE AT http://ewcap.uscarteams.org/. -DESIGNED TO MATE WITH BLADE SEALED ASSEMBLY AS SPECIFIED IN DRAWING SD-33481-061 -FOR 1.5mm RECEPTACLE TERMINALS TO BE USED WITH THIS ASSEMBLY. SEE MOLEX DRAWING SD-33012-002. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2 mm TO 2.69 mm. -ASSEMBLY SHIPPED WITH PLR AND CPA IN PRE-LOCK POSITION (SEE SECTION Z-Z PRE-LOCK). -IN THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT www.molex.com http://www.molex.com. -ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: ENGAGEMENT FORCE TO MOVE CPA FROM PRE-LOCK TO FINAL LOCK POSITION WHEN UNMATED: 40N MIN. DISENGAGEMENT FORCE TO MOVE CPA FROM FINAL LOCK TO PRE-LOCK POSITION: 3N MIN, 40N MAX TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2.5mm NOT EXCEEDING 2.69mm SHALL NOT EXCEED 40 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33471-000 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-903 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) K J H G F 5 4 MATING INTERFACE CHART 3 2 1 M DESCRIPTION CIRCUIT SIZE SERIES COLOR INTERFACE MODEL NUMBER STATUS MX150 1X6 RCPT ASSY, KEY A 6 33471 BLACK CM-150-S-006-1-A03 SALEABLE MX150 1X6 RCPT ASSY, KEY B 6 33471 DARK GRAY CM-150-S-006-1-B03 SALEABLE MX150 1X6 RCPT ASSY, KEY C 6 33471 LIGHT GRAY CM-150-S-006-1-C03 SALEABLE MX150 1X6 RCPT ASSY, KEY D 6 33471 BLACK CM-150-S-006-1-D03 SALEABLE L K CPA OPTIONAL SEE BOM GROMMET CAP J CONNECTOR HOUSING FOR OPTIONS SEE BOM H RING SEAL G MAT SEAL F 2. DESIGN - MATERIALS: a. CONNECTOR HOUSING, GROMMET CAP, PLR: SPS/NYLON BLEND 20% GLASS FILLED b. CPA: PBT 20% GLASS FILLED c. MAT SEAL AND RING SEAL: INHERENTLY LUBRICATED SILICONE E E PRIMARY LOCK REINFORCEMENT (PLR) 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: TBD D C = = B DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/07/08 17 11:19:18 16 15 14 13 12 11 U5 ADDED PN: 33471-6081 U4 Updated status of parts based on new mat seal U3 ADDED 33471-6080 U2 UPDATED 33471-60** PARTS TO SALEABLE AND REMOVED "NOT RECOMMENDED" PART NUMBERS INSPECTION NUMBER LOG U1 Remastered, Added 33471-60** Part Numbers LAST NUMBER: 5 REV REV DESCRIPTION D FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE 10 9 8 0 0 mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± = A 6 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 669011 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/07/02 2021/07/08 2021/07/08 DRAWING 5 2005/08/26 2005/08/29 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 U5 SHEET NUMBER CUSTOMER SEE TABLE 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 1 OF 6 1 A 20 M 19 18 17 SHEET DESCRIPTION POLARIZATIONS 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M 60° 60° L L K K KEY A J J 30° 60° H H G G KEY B 30° 60° F F E E KEY C D D 30° 30° C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = KEY D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/07/08 17 11:19:18 16 15 14 13 12 11 10 9 8 0 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± = B 0 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 669011 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/07/02 2021/07/08 2021/07/08 DRAWING 5 2005/08/26 2005/08/29 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 U5 SHEET NUMBER CUSTOMER SEE TABLE 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 2 OF 6 1 A 20 M 19 18 17 SHEET DESCRIPTION RCPT CONNECTOR ASSY 16 15 14 13 12 10 11 9 7 8 6 5 4 3 2 1 M ⌀35.38 MIN PASS-THRU L Z Y LASER MARKING THIS SURFACE L TERMINAL POSITION 1 SEE NOTE 3g. TERMINAL POSITION 6 3 K K 19.80+0.10 -0.65 J J 2 Z 36.95±0.70 Y 5X 3.50 5 32.65+0.10 -0.40 REAR VIEW (WIRE HARNESS SIDE) 4 H H RECYCLE CODE MOLD CAVITY CODE G G LOCATION CODE F F E E Bottom1 1 2.75±0.50 D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN B IN FINAL-LOCK POSITION IN PRE-STAGED POSITION SECTION Y-Y SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/07/08 17 11:19:18 16 15 14 13 12 11 10 9 8 0 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± = PRIMARY LOCK REINFORCEMENT (PLR) SHOWN 0 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 669011 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/07/02 2021/07/08 2021/07/08 DRAWING 5 2005/08/26 2005/08/29 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 U5 SHEET NUMBER CUSTOMER SEE TABLE 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 3 OF 6 1 A 20 M L K J H G F E D C B A 19 18 SHEET DESCRIPTION BOM SHEET 1 ASSEMBLY PART NUMBER COLOR 33471-0601 33471-0602 33471-0603 33471-0604 33471-0605 33471-0606 33471-0607 33471-0608 33471-0609 33471-0610 33471-0611 33471-0612 33471-0613 33471-0614 33471-0615 33471-0616 33471-0617 33471-0618 33471-0619 33471-0620 33471-0621 33471-0622 33471-0623 33471-0624 33471-0625 33471-0626 33471-0627 33471-0628 33471-0629 33471-0630 33471-0631 33471-0632 33471-0633 33471-0634 33471-0635 33471-0650 33471-0651 33471-0652 33471-0653 33471-0654 33471-0655 33471-0656 33471-0657 33471-0658 33471-0659 33471-0660 33471-0661 33471-0662 33471-0663 33471-0664 33471-0665 33471-0666 33471-0667 33471-0668 33471-0669 33471-0670 33471-0671 33471-0672 33471-0673 33471-0674 33471-0675 33471-0676 33471-0677 33471-0678 BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY BLACK BLACK BLACK BLACK BLACK BLACK DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M CAVITY TYPE & STATUS KEYING (NUMBER PRESENT = PLUGGED) OPTION 4 5 1 2 3 6 A B C D A A B C D A A 6 B 6 6 C D 6 A 6 A 6 B 6 6 C D 6 A 6 A 1 6 B 1 6 1 6 C D 1 6 A 1 6 A 1 6 B 1 6 1 6 C D 1 6 A 1 6 A 4 5 1 2 3 6 B 4 5 1 2 3 6 4 5 1 2 3 6 C D 4 5 1 2 3 6 A 4 5 1 2 3 6 A 5 6 A 4 5 1 2 3 6 A 4 A 3 A 3 A 4 5 3 A 5 A 4 A 4 1 2 3 C D C D 6 C D 6 6 C D 6 1 6 C D 1 6 1 6 C D 1 6 4 5 1 2 3 6 C D 4 5 1 2 3 6 A 3 6 A 2 A 5 1 3 A 1 A 4 2 3 A 4 5 RELEASE DATE 18 17 2021/07/08 17 11:19:18 16 CPA COMMENTS STATUS — — — — — YES YES YES YES YES — — — — — YES YES YES YES YES — — — — — YES YES YES YES YES — — — — — — YES YES YES — — — — — — — YES YES — — YES YES — — YES YES — — — — YES — — — L PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE NOT RECOMMENDED NOT RECOMMENDED PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE NOT RECOMMENDED NOT RECOMMENDED PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE NOT RECOMMENDED NOT RECOMMENDED PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE NOT RECOMMENDED NOT RECOMMENDED PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE NOT RECOMMENDED NOT RECOMMENDED PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE NOT RECOMMENDED NOT RECOMMENDED PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE NOT RECOMMENDED NOT RECOMMENDED PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE 15 14 SEE P/N 33471-0659 SEE P/N 33471-0660 K SEE P/N 33471-0661 SEE P/N 33471-0662 SEE P/N 33471-0663 SEE P/N 33471-0664 J SEE P/N 33471-0665 SEE P/N 33471-0666 H SEE P/N 33471-0667 SEE P/N 33471-0668 G SEE P/N 33471-0669 SEE P/N 33471-0670 SEE P/N 33471-0671 SEE P/N 33471-0672 F E D FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = 12 11 10 9 8 0 mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± = 13 0 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 669011 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/07/02 2021/07/08 2021/07/08 DRAWING 5 2005/08/26 2005/08/29 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 U5 SHEET NUMBER CUSTOMER SEE TABLE 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 4 OF 6 1 A 20 M 19 SHEET DESCRIPTION BOM SHEET 2 ASSEMBLY PART NUMBER L 18 33471-6601 33471-6606 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M CAVITY TYPE & STATUS KEYING (NUMBER PRESENT = PLUGGED) COLOR OPTION 4 5 1 2 3 6 A BLACK A BLACK CPA — YES COMMENTS STATUS L PLANNED OBSOLESCENCE PLANNED OBSOLESCENCE K K J J H H G G F F E E D D C FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/07/08 17 11:19:18 16 15 14 13 12 11 10 9 8 0 mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± = B 0 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 669011 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/07/02 2021/07/08 2021/07/08 DRAWING 5 2005/08/26 2005/08/29 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 U5 SHEET NUMBER CUSTOMER SEE TABLE 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 5 OF 6 1 A 20 M L K J H G F E D C 19 18 SHEET DESCRIPTION BOM SHEET 3 ASSEMBLY PART NUMBER COLOR 33471-6001 33471-6002 33471-6003 33471-6004 33471-6005 33471-6006 33471-6007 33471-6008 33471-6009 33471-6010 33471-6011 33471-6012 33471-6015 33471-6016 33471-6017 33471-6020 33471-6021 33471-6022 33471-6025 33471-6026 33471-6027 33471-6030 33471-6031 33471-6032 33471-6035 33471-6050 33471-6051 33471-6052 33471-6053 33471-6054 33471-6055 33471-6056 33471-6057 33471-6058 33471-6059 33471-6060 33471-6061 33471-6062 33471-6063 33471-6064 33471-6065 33471-6066 33471-6067 33471-6068 33471-6069 33471-6070 33471-6071 33471-6072 33471-6073 33471-6074 33471-6075 33471-6076 33471-6077 33471-6078 33471-6079 33471-6080 33471-6081 BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY YELLOW BLACK LT.GRAY YELLOW BLACK LT.GRAY YELLOW BLACK LT.GRAY YELLOW BLACK LT.GRAY YELLOW BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY DARK GRAY STONE GRAY BLACK BLACK BLACK BLACK BLACK BLACK BLACK BLACK LT.GRAY 17 16 15 14 13 12 11 10 9 7 8 CAVITY TYPE & STATUS KEYING (NUMBER PRESENT = PLUGGED) OPTION 4 5 1 2 3 6 A B C D A A B C D A A 6 B 6 A 6 A 6 B 6 A 6 A 1 6 B 1 6 A 1 6 A 1 6 B 1 6 A 1 6 A 4 5 1 2 3 6 B 4 5 1 2 3 6 A 4 5 1 2 3 6 A 5 6 A 4 5 1 2 3 6 A 4 A 3 A 3 A 4 5 3 A 5 A 4 A 4 1 2 3 C D C D 6 C D 6 6 C D 6 1 6 C D 1 6 1 6 C D 1 6 4 5 1 2 3 6 C D 4 5 1 2 3 6 A 3 6 A 2 A 5 1 3 A 1 A 4 2 3 A 4 5 A 1 A 4 3 B 5 1 2 CPA FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 4 3 2 1 COMMENTS STATUS — — — — — YES YES YES YES YES — — — YES YES YES — — — YES YES YES — — — — YES YES YES — — — — — — — YES YES — — YES YES — — YES YES — — — — YES — — — YES YES YES L SALEABLE SALEABLE NOT RECOMMENDED NOT RECOMMENDED SALEABLE SALEABLE SALEABLE NOT RECOMMENDED NOT RECOMMENDED SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SALEABLE SEE P/N 33471-6059 SEE P/N 33471-6060 K SEE P/N 33471-6061 SEE P/N 33471-6062 J H G F E D FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C SYMBOLS DIMENSION UNITS SCALE CURRENT REV DESC: SEE REVISION TABLE = = B DOCUMENT STATUS 5 M 2021/07/08 17 11:19:18 16 15 14 13 12 11 10 9 8 0 0 mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± = A 6 0 3.0 ° 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 EC NO: 669011 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/07/02 2021/07/08 2021/07/08 DRAWING 5 2005/08/26 2005/08/29 SERIES 33471 DOC TYPE DOC PART REVISION SD-33471-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 U5 SHEET NUMBER CUSTOMER SEE TABLE 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 RECEPTACLE SEALED ASSEMBLY MAT SEAL 2 6 OF 6 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 TABLE OF CONTENTS L 2 1 MATING CONNECTOR DRAWINGS SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS 3-4 KEY CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 SYSTEM PACKAGING 7 BACKSHELL NOTES 8 BACKSHELL 9 BACKSHELL CONFIGURATIONS NOTES: VALID UNLESS OTHERWISE SPECIFIED DESCRIPTION 1X2 MOLEX INLINE SD-33471-0001 1X6 SD-33471-0001 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY AS SPECIFIED IN THE MATING CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT http://ewcap.uscarteams.org/ -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). K L K J b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 (PK-33471-000 FOR 1X5) d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-300 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J H 2. DESIGN - MATERIALS: a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION: SD-33481-0002 -UL V0 CONFIGURATION: SD-160106-0002 H 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. 1X2 G F G F E E D D C A1 NX REMASTERING，CHANGE PS DRAWING NUMBER FROM PS-160105-0001 TO PS-160074-0001 IN NOTES 1.b A 2 MINOR GEOMETRY CHANGE FOR UL V0 UPDATED VIEWSETS 1 INITIAL RELEASE REV REV DESCRIPTION INSPECTION NUMBER LOG LAST NUMBER: 9 ADDED: REMOVED: SYMBOLS B = 0 = 0 = 0 A DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 17 RELEASE DATE 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 1X6 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 1 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION CONFIGURATIONS L L K K UL V0 UNIQUE FEATURE Partial1 SCALE 10:1 J J H H 1X2 - UL V0* 1x2 - STD G G F F E E D D * MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGURATION. SEE NOTES 1 & 2 FOR MORE INFORMATION C SYMBOLS B = 0 = 0 = 0 A 1x6 - UL V0* 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 15:02:02 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 2 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J J 35° 60° H H KEY B G G 35° 60° F F E E KEY C 35° 35° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 3 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS CONT. L L 1X6 60° 60° K K J J KEY A 30° 60° H H G G KEY B 30° 60° F F E E KEY C 30° 30° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 4 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 SHEET DESCRIPTION 1 CHARTED DIMENSIONS BLADE SEALED ASSEMBLY DESCRIPTION L 1X2 A N/A 1X6 29.69 DIMENSIONS B D C 1.75 21.00 55.50 E 17.30 54.45 17.23 1.75 31.71 9 ⌀DIM C K K MIN PASS-THRU WITH NO CLEARANCE OPTIONAL LASER MARKING ON THIS SURFACE SEE NOTE 3g. TERMINAL POSITION 1 2X DIM B J 3.50 TYP. L J Z B DIM E MAX 3 H A A B H Z LAST TERMINAL POSITION DIM A MAX 2 REAR VIEW (WIRE HARNESS SIDE) DIM D MAX 4 G G F F 6 11.00 5 2.00 E E 7 6.60 D 8 15.00 D PARTIAL A-A SCALE 3:1 C C SYMBOLS B = 0 = 0 = 0 PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-LOCK POSITION PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION SECTION B-B A SECTION Z-Z FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 15:02:02 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 5 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION BACKSHELL L L K K J J H H Y Y G G F F E E 11.00 1.50 D 6.40 D 10.80 PARTIAL Y-Y SCALE 3.5:1 C C SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3.5:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 8 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 SHEET DESCRIPTION 2 1 CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS CKT L BLADE RECEPTACLE CONFIGURATION CONFIGURATION 1X2 �137.46� STANDARD STANDARD DIMENSIONS M N P R 107.84 29.50 27.00 26.25 S 25.00 L ⌀DIM N MIN PASS-THRU WITH NO CLEARANCE K K J J OVERALL MATED SYSTEM WITH BLADE AND RECEPTACLE BACKSHELL �103.47� ⌀DIM P MIN PASS-THRU WITH NO CLEARANCE H H G G OVERALL MATED SYSTEM WITH BLADE BACKSHELL F ⌀DIM R �DIM M� F MIN PASS-THRU WITH NO CLEARANCE E E OVERALL MATED SYSTEM WITH RECEPTACLE BACKSHELL �84.75� D D ⌀DIM S MIN PASS-THRU WITH NO CLEARANCE C C BLADE SEALED ASSEMBLY WITH BLADE BACKSHELL SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 2:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 9 OF 9 1 A 20 M 19 18 17 16 15 14 13 12 11 10 9 7 8 SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 BLADE SEALED ASSEMBLY L 4 SYSTEM PACKAGING 5 BOM 4 3 2 1 M TABLE OF CONTENTS SHEET NO. 5 6 NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-061. -FOR 1.5mm BLADE TERMINALS TO BE USED WITH THIS ASSEMBLY SEE MOLEX DRAWING SD-33000-001. - SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION -IN THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT www.molex.com -ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2.5mm NOT EXCEEDING 2.69mm SHALL NOT EXCEED 45 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33471-000 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) K GROMMET CAP J L K J 2. DESIGN - MATERIALS: a. CONNECTOR HOUSING, GROMMET CAP, PLR: SPS/NYLON BLEND 20% GLASS FILLED b. MAT SEAL: INHERENTLY LUBRICATED SILICONE MAT SEAL 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: TBD H CONNECTOR HOUSING FOR OPTIONS SEE BOM H G G F F PRIMARY LOCK REINFORCEMENT (PLR) ADD NEW P/N 33481-6625 TO 33481-6626 V6 E E CHANGED PARTS STATUS TO "NOT RECOMMENDED" FOR SINGLE ROW BLADE V5 MAT SEAL CHANGE UPDATE 33481-0602/0607/0612/0618/0619 STATUS TO "SALEABLE" AND UPDATE V4 D INSPECTION NUMBER LOG LAST NUMBER USED: 8 ADDED: REMOVED: C 33481-0603/0604/0608/0609/0613/0614 STATUS TO "NOT RECOMMENDED" ON SHEET 5; UPDATE 33481-6602/6607/6612/6618/6619 STATUS TO "SALEABLE" AND UPDATE 33481-6603/6604/6608/6609/6613/6614 STATUS TO "NOT RECOMMENDED" ON SHEET 5; ADD NEW P/N 33481-6601 TO 33481-6624 V3 D ADD NEW P/N 33481-0624 V2 ADD NEW P/N 33481-0623 V1 ADD NEW P/N 33481-0621 33481-0622 U ADD NEW P/N 33481-0620 T S UPDATED GROMMET CAP R1 UPDATED DIMENSIONS TO MATCH MODEL COLOR REPLACEMENT FOR KEY C AND D PER USCAR STANDARD R Q REDRAWN REV DESCRIPTION THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 3:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/02/03 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:29:05 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 EC NO: 654141 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/01/29 2021/02/03 2021/02/03 DRAWING 5 2005/08/26 2005/08/29 SERIES 33481 DOC TYPE DOC PART REVISION SD-33481-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 V6 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 BLADE SEALED ASSEMBLY MAT SEAL 2 1 OF 5 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 M 2 1 M KEY CONFIGURATIONS 60° L 60° L K K KEY A J J 30° 60° H H G G KEY B 30° 60° F F E E KEY C D D 30° 30° C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) B KEY D A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/02/03 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:29:05 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 EC NO: 654141 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/01/29 2021/02/03 2021/02/03 DRAWING 5 2005/08/26 2005/08/29 SERIES 33481 DOC TYPE DOC PART REVISION SD-33481-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 V6 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 BLADE SEALED ASSEMBLY MAT SEAL 2 2 OF 5 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M BLADE SEALED ASSEMBLY ⌀31.71 MIN PASS-THRU WITH NO CLEARANCE L LASER MARKING THIS SURFACE Y SEE NOTE 3g. Z TERMINAL POSITION 6 L TERMINAL POSITION 1 K K 2 17.13+0.10 -0.55 D D J J Y 5X 3.50 3 4 A 1 Z 53.85±0.60 29.44+0.25 -0.20 REAR VIEW (WIRE HARNESS SIDE) H H G G 2.00 7 +0.20 6 11.00-0.10 F F E E 6.60 15.00 5 8 SECTION D-D D C D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) B PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-LOCK POSITION IN PRE-STAGED POSITION SECTION Y-Y SECTION Z-Z A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/02/03 17 15 14 13 12 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:29:05 16 ANGULAR TOL 11 10 9 8 7 EC NO: 654141 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/01/29 2021/02/03 2021/02/03 DRAWING 5 2005/08/26 2005/08/29 SERIES 33481 DOC TYPE DOC PART REVISION SD-33481-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 V6 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 BLADE SEALED ASSEMBLY MAT SEAL 2 3 OF 5 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 M 2 1 M SYSTEM PACKAGING L L K K J J ⌀35.38 MIN PASS-THRU WITH NO CLEARANCE (72.71) OVERALL MATED SYSTEM H H G G F F E E D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/02/03 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:29:05 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 EC NO: 654141 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/01/29 2021/02/03 2021/02/03 DRAWING 5 2005/08/26 2005/08/29 SERIES 33481 DOC TYPE DOC PART REVISION SD-33481-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 V6 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 BLADE SEALED ASSEMBLY MAT SEAL 2 4 OF 5 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 BOM SHEET 1 M ASSEMBLY PART NUMBER K J H OPTION 1 2 3 4 5 ASSEMBLY PART NUMBER COMMENTS STATUS 6 SALEABLE NOT RECOMMENDED 33481-6620 BLACK X NOT RECOMMENDED 33481-6621 ST.GRAY D X X NOT RECOMMENDED 33481-6622 ST.GRAY D X NOT RECOMMENDED 33481-6623 BLACK A X NOT RECOMMENDED 33481-6624 BLACK A V6 33481-6625 BLACK A V6 33481-6626 BLACK A NOT RECOMMENDED 33481-0620 BLACK 33481-0621 ST.GRAY D X 33481-0622 ST.GRAY D X 33481-0623 BLACK A X 33481-0624 BLACK A NOT RECOMMENDED, SEE P/N 33481-0619 X NOT RECOMMENDED X NOT RECOMMENDED X NOT RECOMMENDED X NOT RECOMMENDED X X NOT RECOMMENDED X X NOT RECOMMENDED X X NOT RECOMMENDED X X NOT RECOMMENDED X X NOT RECOMMENDED X NOT RECOMMENDED X NOT RECOMMENDED X X X X X X X X G COMMENTS 6 D A D A NOT RECOMMENDED NOT RECOMMENDED X 5 33481-6619 33481-0619 NOT RECOMMENDED, SEE P/N 33481-0618 X X 4 SALEABLE NOT RECOMMENDED NOT RECOMMENDED NOT RECOMMENDED X 3 C C NOT RECOMMENDED X 1 2 STATUS DK.GRAY ST.GRAY DK.GRAY ST.GRAY 33481-6601 33481-6602 33481-6603 33481-6604 33481-6605 33481-6606 33481-6607 33481-6608 33481-6609 33481-6610 33481-6611 33481-6612 33481-6613 33481-6614 33481-6615 33481-6616 33481-6617 33481-6618 NOT RECOMMENDED X OPTION CAVITY TYPE & STATUS ( X = PLUGGED) A B C D A A B C D A A B C D A A A A B C D A A B C D A A B C D A A A X COLOR KEYING BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK BLACK BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK LT.GRAY BROWN GREEN YELLOW BLACK BLACK 33481-0601 33481-0602 33481-0603 33481-0604 33481-0605 33481-0606 33481-0607 33481-0608 33481-0609 33481-0610 33481-0611 33481-0612 33481-0613 33481-0614 33481-0615 33481-0616 33481-0617 33481-0618 L KEYING COLOR CAVITY TYPE & STATUS ( X = PLUGGED) M SALEABLE L SALEABLE NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-6618 NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-6619 SALEABLE X SALEABLE X SALEABLE X NOT RECOMMENDED X NOT RECOMMENDED X SALEABLE X X SALEABLE X X SALEABLE X X NOT RECOMMENDED X X NOT RECOMMENDED X X SALEABLE X SALEABLE X X X X X X X SALEABLE X X X X X SALEABLE X SALEABLE X X X J SALEABLE X X K H SALEABLE SALEABLE X X X SALEABLE X X SALEABLE G F F E E D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) B A DOCUMENT STATUS FORMAT: master-tb-prod-D REVISION: J DATE: 2020/01/14 19 P1 RELEASE DATE 18 2021/02/03 17 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.3 0 PLACES ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:29:05 16 ANGULAR TOL 15 14 13 12 11 10 9 8 7 EC NO: 654141 DRWN: SCV CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: DGRIFFITHS APPR: smarceau THIRD ANGLE PROJECTION 2021/01/29 2021/02/03 2021/02/03 DRAWING 5 2005/08/26 2005/08/29 SERIES 33481 DOC TYPE DOC PART REVISION SD-33481-061 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 V6 SHEET NUMBER CUSTOMER SEE BOM 4 B PRODUCT CUSTOMER DRAWING DOCUMENT NUMBER D-SIZE 6 MX150 1X6 BLADE SEALED ASSEMBLY MAT SEAL 2 5 OF 5 1 A