33472-1202

MX150 CPA Installation Guide MX150 CPA INSTALLATION GUIDE 1.0 SCOPE: This procedure shows the proper installation of the CPA on any of the MX150 family connectors not shipped with a CPA installed 2.0 PRODUCT DESCRIPTION: MX150 loose piece CPA 3.0 REFERENCE DOCUMENTS: CPA Drawing: SD-33611-001 MX150 Application Specification: AS-33472-100 MX150 Connector Sales Drawings: SD-33471-*** (multiple documents exist) SD-33472-***(multiple documents exist) SD-160008-****(multiple documents exist) 4.0 PROCEDURE 4.1 GENERAL REQUIREMENTS: MX150 Receptacle Connector (ref) CPA (P/N 336110001) REVISION: A1 ECR/ECN INFORMATION: EC No: UAU2015-0507 TITLE: MX150 CPA Installation Guide 1 of 4 DATE: 2014/09/26 DOCUMENT NUMBER: AS-33611-001 SHEET No. CREATED / REVISED BY: CHECKED BY: APPROVED BY: K. Boruszewski T. Skiver V. Koshy TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC MX150 CPA Installation Guide 4.2 ASSEMBLY INSTRUCTIONS: a. Align CPA as shown b. Confirm alignment and push on the back of the CPA until an audible and tactile click is heard and felt REVISION: A1 ECR/ECN INFORMATION: EC No: UAU2015-0507 TITLE: MX150 CPA Installation Guide 2 of 4 DATE: 2014/09/26 DOCUMENT NUMBER: AS-33611-001 SHEET No. CREATED / REVISED BY: CHECKED BY: APPROVED BY: K. Boruszewski T. Skiver V. Koshy TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC MX150 CPA Installation Guide c. When fully installed, the CPA should have some free play d. CPA properly installed and in the proper position REVISION: A1 ECR/ECN INFORMATION: EC No: UAU2015-0507 TITLE: MX150 CPA Installation Guide 3 of 4 DATE: 2014/09/26 DOCUMENT NUMBER: AS-33611-001 SHEET No. CREATED / REVISED BY: CHECKED BY: APPROVED BY: K. Boruszewski T. Skiver V. Koshy TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC MX150 CPA Installation Guide e. CPA over installed resulting in connector, latch and CPA damaged CONNECTOR and CPA MUST BE DISCARDED 4.3 REMOVAL INSTRUCTIONS SHOULD INCLUDE ALL NECESSARY STEPS FOR DISASSEMBLY OF PRODUCT, ALSO LIST OF REQUIRED SERVICE TOOLS a. The CPA is not a servicible component of the assembly and can not be removed and replaced REVISION PAGE: REVISION A A1 DESCRIPTION Initial Release Added MX150 GEN 2 drawing references NOTE: PLEASE REFER TO MOLEX.COM TO ENSURE THE LATEST REVISION OF THIS DOCUMENT Example : http://midasweb.global.molex.com:7041/midas/FileDownloadServlet?elid=BZWRAFK6 REVISION: A1 ECR/ECN INFORMATION: EC No: UAU2015-0507 TITLE: MX150 CPA Installation Guide 4 of 4 DATE: 2014/09/26 DOCUMENT NUMBER: AS-33611-001 SHEET No. CREATED / REVISED BY: CHECKED BY: APPROVED BY: K. Boruszewski T. Skiver V. Koshy TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC