334810201

18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 TABLE OF CONTENTS L 2 1 MATING CONNECTOR DRAWINGS SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS 3-4 KEY CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 SYSTEM PACKAGING 7 BACKSHELL NOTES 8 BACKSHELL 9 BACKSHELL CONFIGURATIONS NOTES: VALID UNLESS OTHERWISE SPECIFIED DESCRIPTION 1X2 MOLEX INLINE SD-33471-0001 1X6 SD-33471-0001 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY AS SPECIFIED IN THE MATING CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT http://ewcap.uscarteams.org/ -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). K L K J b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 (PK-33471-000 FOR 1X5) d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-300 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J H 2. DESIGN - MATERIALS: a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION: SD-33481-0002 -UL V0 CONFIGURATION: SD-160106-0002 H 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. 1X2 G F G F E E D D C A1 NX REMASTERING，CHANGE PS DRAWING NUMBER FROM PS-160105-0001 TO PS-160074-0001 IN NOTES 1.b A 2 MINOR GEOMETRY CHANGE FOR UL V0 UPDATED VIEWSETS 1 INITIAL RELEASE REV REV DESCRIPTION INSPECTION NUMBER LOG LAST NUMBER: 9 ADDED: REMOVED: SYMBOLS B = 0 = 0 = 0 A DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 17 RELEASE DATE 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 1X6 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 1 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION CONFIGURATIONS L L K K UL V0 UNIQUE FEATURE Partial1 SCALE 10:1 J J H H 1X2 - UL V0* 1x2 - STD G G F F E E D D * MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGURATION. SEE NOTES 1 & 2 FOR MORE INFORMATION C SYMBOLS B = 0 = 0 = 0 A 1x6 - UL V0* 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 15:02:02 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 2 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J J 35° 60° H H KEY B G G 35° 60° F F E E KEY C 35° 35° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 3 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS CONT. L L 1X6 60° 60° K K J J KEY A 30° 60° H H G G KEY B 30° 60° F F E E KEY C 30° 30° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 4 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 SHEET DESCRIPTION 1 CHARTED DIMENSIONS BLADE SEALED ASSEMBLY DESCRIPTION L 1X2 A N/A 1X6 29.69 DIMENSIONS B D C 1.75 21.00 55.50 E 17.30 54.45 17.23 1.75 31.71 9 ⌀DIM C K K MIN PASS-THRU WITH NO CLEARANCE OPTIONAL LASER MARKING ON THIS SURFACE SEE NOTE 3g. TERMINAL POSITION 1 2X DIM B J 3.50 TYP. L J Z B DIM E MAX 3 H A A B H Z LAST TERMINAL POSITION DIM A MAX 2 REAR VIEW (WIRE HARNESS SIDE) DIM D MAX 4 G G F F 6 11.00 5 2.00 E E 7 6.60 D 8 15.00 D PARTIAL A-A SCALE 3:1 C C SYMBOLS B = 0 = 0 = 0 PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-LOCK POSITION PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION SECTION B-B A SECTION Z-Z FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 15:02:02 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 5 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION BACKSHELL L L K K J J H H Y Y G G F F E E 11.00 1.50 D 6.40 D 10.80 PARTIAL Y-Y SCALE 3.5:1 C C SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3.5:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 8 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 SHEET DESCRIPTION 2 1 CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS CKT L BLADE RECEPTACLE CONFIGURATION CONFIGURATION 1X2 �137.46� STANDARD STANDARD DIMENSIONS M N P R 107.84 29.50 27.00 26.25 S 25.00 L ⌀DIM N MIN PASS-THRU WITH NO CLEARANCE K K J J OVERALL MATED SYSTEM WITH BLADE AND RECEPTACLE BACKSHELL �103.47� ⌀DIM P MIN PASS-THRU WITH NO CLEARANCE H H G G OVERALL MATED SYSTEM WITH BLADE BACKSHELL F ⌀DIM R �DIM M� F MIN PASS-THRU WITH NO CLEARANCE E E OVERALL MATED SYSTEM WITH RECEPTACLE BACKSHELL �84.75� D D ⌀DIM S MIN PASS-THRU WITH NO CLEARANCE C C BLADE SEALED ASSEMBLY WITH BLADE BACKSHELL SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 2:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 9 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 TABLE OF CONTENTS L SHEET NO. K L SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 BLADE SEALED ASSEMBLY 4 SYSTEM PACKAGING 5 BACKSHELL NOTES 6 BACKSHELL 7 BACKSHELL CONFIGURATIONS 8~9 BOM NOTES: VALID UNLESS OTHERWISE SPECIFIED 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-021. -FOR 1.5mm BLADE TERMINALS TO BE USED WITH THIS ASSEMBLY SEE MOLEX DRAWING SD-33000-001. - SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION -IN THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT www.molex.com -ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2.5mm NOT EXCEEDING 2.69mm SHALL NOT EXCEED 40 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33471-000 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J GROMMET CAP H MAT SEAL K J H 2. DESIGN - MATERIALS: a. SEE BOM TABLE 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: TBD CONNECTOR HOUSING G FOR OPTIONS SEE BOM F G F PRIMARY LOCK REINFORCEMENT (PLR) E E D INSPECTION LOG LAST NUMBER USED: 57 ADDED: REMOVED: C A12 ADD NEW P/N 33481-2201 TO 33481-2210 A10 ADD NEW P/N 33481-0210 A9 UPDATED VIEWSET & NOTES A8 RENAMED BACKSHELLS A7 REMOVED DIMENSION 57 A6 UPDATED NOTES A5 UPDATED P/N ORDER IN BOM A4 REDRAWN, ADDED BACKSHELL REV DESCRIPTION D C RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 0 DRWN BY ANGULAR TOL ± 3.0 ° A12 REV A = EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU B 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 3:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 33481 SEE BOM DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 1 OF 9 1 A 19 18 17 16 15 14 13 L 12 11 10 9 7 8 5 6 4 3 2 KEY CONFIGURATIONS 60° 60° 1 L K K KEY A J 35° J 60° H H G G KEY B F F 35° 60° E E D D KEY C 35° 35° C C A RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 0 DRWN BY ANGULAR TOL ± 3.0 ° A12 REV KEY D = EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU B 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 4:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE BOM 33481 DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 2 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L L BLADE SEALED ASSEMBLY OPTIONAL LASER MARKING ON Z THIS SURFACE SEE NOTE 3g K TERMINAL POSITION Y 17.1 5 Z 8 ⌀21.00 2 MIN PASS-THRU WITH NO CLEARANCE X X J K J A 54.9±0.6 3 3.50 H TERMINAL Y POSITION 2 H TERMINAL POSITION 1 REAR VIEW (WIRE HARNESS SIDE) G G F F 11.00 2.00 6.60 E 15.00 E Partial X-X D D 1 13.3±0.5 C C PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION IN FINAL-LOCK POSITION SECTION Y-Y SECTION Z-Z A RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 0 DRWN BY ANGULAR TOL ± 3.0 ° A12 REV PRIMARY LOCK REINFORCEMENT (PLR) SHOWN = EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU B 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 4:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 33481 SEE BOM DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 3 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L L SYSTEM PACKAGING K K J J (73.85) OVERALL MATED SYSTEM H H ⌀23.37 MIN PASS-THRU WITH NO CLEARANCE G G F F E E D D C C RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 0 DRWN BY ANGULAR TOL ± 3.0 ° A12 REV A = EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU B 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 1:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 33481 SEE BOM DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 4 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 BACKSHELL NOTES L L BACKSHELL (BKS) K K BACKSHELL NOTES: VALID UNLESS OTHERWISE SPECIFIED J J 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-34951-001 -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33472-021. -SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. -COMPONENTS ARE OPTIONAL AND MUST BE PURCHASED SEPERATELY. -BACKSHELL DESIGN IS OWNED BY SCHLEMMER. -FOR ADDITIONAL INFORMATION SEE THE BACKSHELL COMPONENT DRAWING SD-34948-0001. BLADE SEALED ASSEMBLY H H G G F F E E D D C C BACKSHELL CUSTOMER MODEL NUMBER LEGEND 34948-XXXX BACKSHELL FEATURES 1 - WITH RIBS 2 - WITHOUT RIBS MX150 CIRCUIT SIZE 02, 03, 04, 05, 06 A RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 0 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 = DRWN BY ANGULAR TOL ± 3.0 ° A12 REV B EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU CUSTOMER MODEL COMPONENTS 0 - BACKSHELL ONLY 1 - BACKSHELL & MX150 HOUSING KEY A ASSEMBLY 2 - BACKSHELL & MX150 HOUSING KEY B ASSEMBLY 3 - BACKSHELL & MX150 HOUSING KEY C ASSEMBLY 4 - BACKSHELL & MX150 HOUSING KEY D ASSEMBLY 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 4:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES SEE BOM 33481 DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 5 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 BACKSHELL THE VIEWS ON THIS SHEET ARE IN THE CLOSED UN-ASSEMBLED POSITION L L K K J J W W H H G G F F 11.00 1.50 E 6.40 E 10.80 Partial W-W SCALE 4:1 D D C C RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 0 DRWN BY ANGULAR TOL ± 3.0 ° A12 REV A = EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU B 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 4:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 33481 SEE BOM DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 6 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 L 3 2 1 L BACKSHELL CONFIGURATIONS (137.46) ⌀29.50 MIN PASS-THRU WITH NO CLEARANCE K K OVERALL MATED SYSTEM WITH BLADE AND RECEPTACLE BACKSHELL J J (103.47) ⌀27.00 MIN PASS-THRU WITH NO CLEARANCE H H OVERALL MATED SYSTEM WITH BLADE BACKSHELL G G (107.84) ⌀26.25 MIN PASS-THRU WITH NO CLEARANCE F F E E OVERALL MATED SYSTEM WITH RECEPTACLE BACKSHELL D D (84.75) ⌀25.00 MIN PASS-THRU WITH NO CLEARANCE C C BLADE SEALED ASSEMBLY WITH BLADE BACKSHELL RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 0 DRWN BY ANGULAR TOL ± 3.0 ° A12 REV A = EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU B 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 2:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 33481 SEE BOM DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 7 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 BOM SHEET 1 L L K K J KEY A, YELLOW 33481-0210 KEY A, BLACK 33481-0209 KEY D, STONE GRAY 33481-0208 KEY C, DARK GRAY 33481-0207 KEY B, LIGHT GRAY 33481-0206 KEY A, BLACK 33481-0205 KEY D, STONE GRAY 33481-0204 KEY C, DARK GRAY 33481-0203 KEY B, LIGHT GRAY 33481-0202 KEY A, BLACK 33481-0201 H ASSEMBLY DESCRIPTION ASSEMBLY A GCO GCP2 A A B C D A SALEABLE 34948-0210 34948-0220 SALEABLE 34948-0210 34948-0220 GCP 1 2 SALEABLE 34948-0210 34948-0220 GCP 1 2 SALEABLE 34948-0210 34948-0220 GCP 1 2 SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 A A 2 2 B B 34948-0220 1 C C 34948-0210 GCP D D SALEABLE GCO GCP GCP2 1 2 BLOCKED TERMINAL PART NUMBERS COMMENTS STATUS WITH RIBS WITHOUT RIBS SOLD SEPARATELY CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION MAT SEAL BACKSHELL RUST RED INHERENTLY LUBRICATED SILICONE NATURAL SPS/NYLON GF20 GROMMET CAP (CAVITY 2 PLUGGED) BLACK SPS/NYLON GF20 GROMMET CAP (PLUGGED) BLACK SPS/NYLON GF20 BLACK SPS/NYLON GF20 HOUSING - KEYING OPTION A YELLOW SPS/NYLON GF20 HOUSING - KEYING OPTION D STONE GRAY SPS/NYLON GF20 HOUSING - KEYING OPTION C DARK GRAY SPS/NYLON GF20 HOUSING - KEYING OPTION B LIGHT GRAY SPS/NYLON GF20 HOUSING - KEYING OPTION A BLACK SPS/NYLON GF20 PLR GROMMET CAP (OPEN) F H OPTIONAL ATTACHMENTS CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION G BACKSHELL J DESCRIPTION G F MATERIAL COLOR BOM/APPLICABLE COMPONENTS TABLE E E D D LEGEND TABLE HOUSING KEY A B HOUSING KEY B C HOUSING KEY C D HOUSING KEY D GCO GROMMET CAP (OPEN) B GCP GCP2 P1 = 0 = 0 MAT SEAL = 0 BACKSHELL = 0 PLR, STANDARD BKS RELEASE STATUS 19 0 GROMMET CAP (CAVITY 2 PLUGGED) M FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 = GROMMET CAP (PLUGGED) P A QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 1:1 = 0 (UNLESS SPECIFIED) RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 2017/10/31 A C DRWN BY ANGULAR TOL ± 3.0 ° A12 REV COMPONENT 2017/10/30 ABREVIATION EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU C 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 33481 GENERAL MARKET SEE BOM DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 DOC TYPE DOC PART SHEET NUMBER PSD 2 001 8 OF 9 1 A 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 L L A12 BOM SHEET 2 K K J J H KEY A, YELLOW 33481-2210 KEY A, BLACK 33481-2209 KEY D, STONE GRAY 33481-2208 KEY C, DARK GRAY 33481-2207 KEY B, LIGHT GRAY 33481-2206 KEY A, BLACK 33481-2205 KEY D, STONE GRAY 33481-2204 KEY C, DARK GRAY 33481-2203 KEY B, LIGHT GRAY 33481-2202 KEY A, BLACK 33481-2201 ASSEMBLY DESCRIPTION G ASSEMBLY A GCO GCP2 A A B C D A SALEABLE 34948-0210 34948-0220 SALEABLE 34948-0210 34948-0220 GCP 1 2 SALEABLE 34948-0210 34948-0220 GCP 1 2 SALEABLE 34948-0210 34948-0220 GCP 1 2 SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 GCO SALEABLE 34948-0210 34948-0220 A A 2 2 B B 34948-0220 1 C C 34948-0210 GCP D D SALEABLE GCO GCP GCP2 1 2 BLOCKED TERMINAL PART NUMBERS COMMENTS STATUS BACKSHELL WITH RIBS WITHOUT RIBS OPTIONAL ATTACHMENTS CAVITY WITH A NUMBER INDICATES BLOCKED TERMINAL POSITION GREEN INHERENTLY LUBRICATED SILICONE NATURAL SPS/NYLON GF20 GROMMET CAP (CAVITY 2 PLUGGED) BLACK SPS/NYLON GF20 GROMMET CAP (PLUGGED) BLACK SPS/NYLON GF20 BLACK SPS/NYLON GF20 HOUSING - KEYING OPTION A YELLOW SPS/NYLON GF20 HOUSING - KEYING OPTION D STONE GRAY SPS/NYLON GF20 HOUSING - KEYING OPTION C DARK GRAY SPS/NYLON GF20 HOUSING - KEYING OPTION B LIGHT GRAY SPS/NYLON GF20 HOUSING - KEYING OPTION A BLACK SPS/NYLON GF20 PLR GROMMET CAP (OPEN) F DESCRIPTION E G SOLD SEPARATELY CAVITY WITHOUT A NUMBER INDICATES OPEN TERMINAL POSITION MAT SEAL BACKSHELL H F MATERIAL COLOR E BOM/APPLICABLE COMPONENTS TABLE D D C C RELEASE STATUS 19 FORMAT: master-tb-prod-D REVISION: G DATE: 2017/02/06 P1 RELEASE DATE 18 31.10.2017 17 21:13:48 C 16 15 14 13 12 11 10 9 8 7 = 0 = 0 = 0 = 0 = 0 = 0 2017/10/31 0 DRWN BY ANGULAR TOL ± 3.0 ° A12 REV A = EC NO: 167392 DRWN: LSONG05 CHK'D: APPR: MVANSLAMBROU B 2017/10/30 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE GENERAL SYMBOLS TOLERANCES mm 1:1 = 0 (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± 2017/10/18 MVANSLAMBROU VKOSHY DRAWING SIZE DATE 2012/07/19 THIRD ANGLE PROJECTION D 5 MX150 1X2 BLADE SEALED ASSEMBLY MAT SEAL DATE CHK'D BY DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 2012/07/19 KCUNNINGHAM APPR BY B DATE PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 33481 SEE BOM DOCUMENT NUMBER 4 CUSTOMER SD-33481-021 3 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 2 001 9 OF 9 1 A