334810301

18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 TABLE OF CONTENTS L 2 1 MATING CONNECTOR DRAWINGS SHEET NO. SHEET DESCRIPTION 1 NOTES AND BOM 2 CONFIGURATIONS 3-4 KEY CONFIGURATIONS 5 BLADE SEALED ASSEMBLY 6 SYSTEM PACKAGING 7 BACKSHELL NOTES 8 BACKSHELL 9 BACKSHELL CONFIGURATIONS NOTES: VALID UNLESS OTHERWISE SPECIFIED DESCRIPTION 1X2 MOLEX INLINE SD-33471-0001 1X6 SD-33471-0001 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 -CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY AS SPECIFIED IN THE MATING CONNECTOR DRAWINGS CHART. *DENOTES DRAWINGS THAT CAN BE ACCESSED AT http://ewcap.uscarteams.org/ -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION (SEE PLR PRE-LOCK VIEW SHEET 5). K L K J b. PRODUCT SPECIFICATION SEE: -STANDARD CONFIGURATION: PS-33471-000 -UL V0 CONFIGURATION: PS-160105-0001 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), TERMINALS, WIRE DIAMETER RANGE, PRODUCT VALIDATION, AND PRODUCT DEVIATIONS. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 (PK-33471-000 FOR 1X5) d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: QEHS-699000-300 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) J H 2. DESIGN - MATERIALS: a. FOR BILL OF MATERIALS SEE: -STANDARD CONFIGURATION: SD-33481-0002 -UL V0 CONFIGURATION: SD-160106-0002 H 3. DESIGN - GEOMETRY: a. THE 3-D CAD DATA IS BASIC (WITHOUT TOLERANCE) AND MASTER FOR THIS PART WITH THE EXCEPTION OF UNDERLINED DIMENSIONS. DIMENSIONAL INFORMATION NOT SHOWN ON THIS DRAWING IS DEFINED BY THE DATA FILE AT ITS LATEST REVISION. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M-2009 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B). g. LASER MARKING: 1. PART NUMBER 2. DAY OF THE YEAR 3. SHIFT 4. YEAR FOR ADDITIONAL INFORMATION SEE SECTION 5 UNDER PROCEDURES IN ES-34735-008. 1X2 G F G F E E D D C A1 NX REMASTERING，CHANGE PS DRAWING NUMBER FROM PS-160105-0001 TO PS-160074-0001 IN NOTES 1.b A 2 MINOR GEOMETRY CHANGE FOR UL V0 UPDATED VIEWSETS 1 INITIAL RELEASE REV REV DESCRIPTION INSPECTION NUMBER LOG LAST NUMBER: 9 ADDED: REMOVED: SYMBOLS B = 0 = 0 = 0 A DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 17 RELEASE DATE 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 1X6 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 1 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION CONFIGURATIONS L L K K UL V0 UNIQUE FEATURE Partial1 SCALE 10:1 J J H H 1X2 - UL V0* 1x2 - STD G G F F E E D D * MINOR GEOMETRY DIFFERENCE THAN STANDARD CONFIGURATION. SEE NOTES 1 & 2 FOR MORE INFORMATION C SYMBOLS B = 0 = 0 = 0 A 1x6 - UL V0* 1x6 - STD DOCUMENT STATUS FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 MM ONLY 1.5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C SCALE ± = 0 15:02:02 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 2 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS 1X2 L L 60° 60° K K KEY A J J 35° 60° H H KEY B G G 35° 60° F F E E KEY C 35° 35° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 3 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION KEY CONFIGURATIONS CONT. L L 1X6 60° 60° K K J J KEY A 30° 60° H H G G KEY B 30° 60° F F E E KEY C 30° 30° D D C C KEY D SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 4 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 SHEET DESCRIPTION 1 CHARTED DIMENSIONS BLADE SEALED ASSEMBLY DESCRIPTION L 1X2 A N/A 1X6 29.69 DIMENSIONS B D C 1.75 21.00 55.50 E 17.30 54.45 17.23 1.75 31.71 9 ⌀DIM C K K MIN PASS-THRU WITH NO CLEARANCE OPTIONAL LASER MARKING ON THIS SURFACE SEE NOTE 3g. TERMINAL POSITION 1 2X DIM B J 3.50 TYP. L J Z B DIM E MAX 3 H A A B H Z LAST TERMINAL POSITION DIM A MAX 2 REAR VIEW (WIRE HARNESS SIDE) DIM D MAX 4 G G F F 6 11.00 5 2.00 E E 7 6.60 D 8 15.00 D PARTIAL A-A SCALE 3:1 C C SYMBOLS B = 0 = 0 = 0 PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-LOCK POSITION PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION SECTION B-B A SECTION Z-Z FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 P1 RELEASE DATE 17 16 2018/10/04 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3:1 ± = 0 15:02:02 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 5 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 SHEET DESCRIPTION BACKSHELL L L K K J J H H Y Y G G F F E E 11.00 1.50 D 6.40 D 10.80 PARTIAL Y-Y SCALE 3.5:1 C C SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 3.5:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 8 OF 9 1 A 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 SHEET DESCRIPTION 2 1 CHARTED DIMENSIONS BACKSHELL CONFIGURATIONS CKT L BLADE RECEPTACLE CONFIGURATION CONFIGURATION 1X2 �137.46� STANDARD STANDARD DIMENSIONS M N P R 107.84 29.50 27.00 26.25 S 25.00 L ⌀DIM N MIN PASS-THRU WITH NO CLEARANCE K K J J OVERALL MATED SYSTEM WITH BLADE AND RECEPTACLE BACKSHELL �103.47� ⌀DIM P MIN PASS-THRU WITH NO CLEARANCE H H G G OVERALL MATED SYSTEM WITH BLADE BACKSHELL F ⌀DIM R �DIM M� F MIN PASS-THRU WITH NO CLEARANCE E E OVERALL MATED SYSTEM WITH RECEPTACLE BACKSHELL �84.75� D D ⌀DIM S MIN PASS-THRU WITH NO CLEARANCE C C BLADE SEALED ASSEMBLY WITH BLADE BACKSHELL SYMBOLS B = 0 = 0 = 0 A FORMAT: master-tb-prod-A1 REVISION: H DATE: 2018/01/18 18 RELEASE DATE 17 16 2018/10/04 15:02:02 15 14 13 12 11 10 9 8 7 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.1 1 PLACE ± 0.2 0 PLACES ± = 0 C MM ONLY 2:1 ± = 0 P1 SCALE ANGULAR TOL = 0 DOCUMENT STATUS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 6 CURRENT REV DESC: B EC NO: 602373 DRWN: DSHETTY01 CHK'D: MVANSLAMBROU APPR: MVANSLAMBROU INITIAL REVISION: DRWN: APROFFITT APPR: KDEKOSKI THIRD ANGLE PROJECTION 5 2018/05/25 2018/10/04 2018/10/04 2015/07/21 2016/06/14 DRAWING SERIES A1-SIZE 33481 4 MX150 BLADE SINGLE ROW SEALED ASSY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-33481-0001 MATERIAL NUMBER SEE NOTE 2a. 3 PSD 001 CUSTOMER GENERAL MARKET 2 A1 SHEET NUMBER 9 OF 9 1 A 20 M L 19 18 17 16 15 14 13 12 TABLE OF CONTENTS SHEET NO. SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 BLADE SEALED ASSEMBLY 4 SYSTEM PACKAGING 5 RUBBER BOOT CONFIGURATION 6 BOM 7 RUBBER BOOT INTERFACE 11 10 9 7 8 5 6 4 2 1 M NOTES: VALID UNLESS OTHERWISE SPECIFIED K GROMMET CAP. STANDARD (GC) MAT SEAL J CONNECTOR HOUSING FOR OPTIONS SEE BOM H PRIMARY LOCK REINFORCEMENT (PLR) G 1. GENERAL: a. APPLICATION SPECIFICATION SEE: AS-33472-100 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY, PACKAGING INFORMATION, CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUITY CHECKING, CRIMPING, AND TROUBLESHOOTING. -DESIGNED TO MATE WITH RECEPTACLE SEALED ASSEMBLY SPECIFIED IN MOLEX DRAWING SD-33471-031. -FOR 1.5mm BLADE TERMINALS TO BE USED WITH THIS ASSEMBLY SEE MOLEX DRAWING SD-33000-001. - SYSTEM TO BE USED WITH WIRE WITHIN DIAMETER RANGE OF 1.2mm TO 2.69mm. -ASSEMBLY SHIPPED WITH PLR IN PRE-LOCK POSITION -IN THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT www.molex.com -ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2.5mm NOT EXCEEDING 2.69mm SHALL NOT EXCEED 45 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33471-000 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. c. PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-31300-635 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMICAL SUBSTANCES FOR PRODUCTS AND PACKAGING SPECIFICATION: ES-40000-5016 e. DATA MUST BE SUBMITTED UNDER THE MOLEX PART NUMBER TO IMDS (COMPANY ID#13255) L K J H G 2. DESIGN - MATERIALS: a. CONNECTOR HOUSING, GROMMET CAP, PLR: SPS/NYLON BLEND 20% GLASS FILLED b. MAT SEAL: INHERENTLY LUBRICATED SILICONE 3. DESIGN - GEOMETRY: a. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA IS THE MASTER FOR THIS PART. FOR DIMENSIONAL OR ANY INFORMATION NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y14.5M - 1994 c. EDGES AND UNDIMENSIONED DETAILS PER ISO13715 d. CORNERS SHOWN AS SHARP TO BE R 0.2 MAX. e. LETTERING SHALL BE 0.15 MAX RAISED IN 0.25 MAX RECESS PAD. THIS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AND CUSTOMER MATERIAL NUMBER. f. VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-45499-002 (Class B) g. LASER MARKING: TBD F MX150 1X3 BLADE SEALED ASSEMBLY - STANDARD (STD) GROMMET CAP WITH RUBBER BOOT ATTACHMENT (GCB) E F D INSPECTION NUMBER LOG LAST NUMBER USED: 21 ADDED: REMOVED: C R5 ADDED STATUS COLUMN R4 ADD P/NS 33481-3301 TO 33481-3341 R3 DEVIATED THE DIM 16 R2 RELEASED P/N 33481-0341 R1 RELEASED P/N 33481-0340, DELETED P/N 33481-0331 R ADD RUBBER BOOT CONFIGURATION Q UPDATE P/N 33481-0326 TO 33481-0330 P ADD NEW P/N 33481-0326 N UPDATED GROMMET CAP M3 UPDATED DIMENSIONS TO MATCH MODEL M2 COLOR REPLACEMENT FOR KEY C AND D PER USCAR STANDARD M1 UPDATED NOTES M REDRAWN REV DESCRIPTION E D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 3:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) MM B MX150 1X3 BLADE SEALED ASSEMBLY - RUBBER BOOT CONFIGURATION UNLESS COMPONENT NOTED, SEE STANDARD ASSEMBLY DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/09/21 17 ± 3 PLACES ± ± 2 PLACES ± 0.1 ± ± 0.3 ± 0 PLACES ± 15 14 ± ANGULAR TOL ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:03:57 16 INCH 4 PLACES ± 1 PLACE A 3 13 12 11 10 9 8 7 EC NO: 645317 DRWN: MKP CHK'D: MJMITCHELL APPR: MJMITCHELL INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 6 2020/08/10 2020/09/21 2020/09/21 MX150 1X3 BLADE SEALED ASSEMBLY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 06-12-02 06-12-02 DRAWING SERIES D-SIZE 33481 5 SD-33481-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R5 SHEET NUMBER CUSTOMER SEE BOM 4 B 2 1 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 M M 60° KEY CONFIGURATION 60° L L K K KEY A 35° J J 60° H H KEY B G G 35° 60° F F E E KEY C D D 35° 35° C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) MM B 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.1 ± ± 0.3 ± 1 PLACE KEY D 0 PLACES ± ± ANGULAR TOL A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/09/21 17 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:03:57 16 INCH 15 14 13 12 11 10 9 8 7 EC NO: 645317 DRWN: MKP CHK'D: MJMITCHELL APPR: MJMITCHELL INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 6 2020/08/10 2020/09/21 2020/09/21 MX150 1X3 BLADE SEALED ASSEMBLY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 06-12-02 06-12-02 DRAWING SERIES D-SIZE 33481 5 SD-33481-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R5 SHEET NUMBER CUSTOMER SEE BOM 4 B 2 2 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 BLADE SEALED ASSEMBLY M M ⌀22.82 MIN. PASS-THROUGH WITH NO CLEARANCE LASER MARKING THIS SURFACE SEE NOTE 3g. L Z TERMINAL POSITION 3 Y TERMINAL POSITION 1 2 +0.10 17.13 -0.25 K L K C 1 2x 3.50 J C Y A +0.10 18.94 -0.20 Z A ±0.60 3 J REAR VIEW (WIRE HARNESS SIDE) H H G G 7 2.00 6 11.00 F F 6.60 5 E 15.00 8 E SECTION C-C D D CHARTED DIMENSIONS CONFIGURATION MX150 1X3 BLADE SEALED ASSEMBLY - STANDARD MX150 1X3 BLADE SEALED ASSEMBLY - RIBBER BOOT CONFIGURATION C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) MM B PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN PRE-STAGED POSITION PRIMARY LOCK REINFORCEMENT (PLR) SHOWN IN FINAL-LOCK POSITION DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/09/21 17 ± 3 PLACES ± ± 2 PLACES ± 0.1 ± ± 0.3 ± 0 PLACES ± ± ANGULAR TOL ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:03:57 16 INCH 4 PLACES ± 1 PLACE SECTION Y-Y SECTION Z-Z A A 53.85 57.85 15 14 13 12 11 10 9 8 7 EC NO: 645317 DRWN: MKP CHK'D: MJMITCHELL APPR: MJMITCHELL INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 6 2020/08/10 2020/09/21 2020/09/21 MX150 1X3 BLADE SEALED ASSEMBLY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 06-12-02 06-12-02 DRAWING SERIES D-SIZE 33481 5 SD-33481-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R5 SHEET NUMBER CUSTOMER SEE BOM 4 B 2 3 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 M 2 1 M SYSTEM PACKAGING L L K K ⌀25.30 (C) OVERALL MATED SYSTEM J MIN. PASS-THROUGH WITH NO CLEARANCE J H H G G F F E E CHARTED DIMENSIONS CONFIGURATION MX150 1X3 BLADE SEALED ASSEMBLY - STANDARD MX150 1X3 BLADE SEALED ASSEMBLY - RIBBER BOOT CONFIGURATION D C A 53.85 57.85 D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 4:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) MM B 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.1 ± ± 0.3 ± 1 PLACE 0 PLACES ± ± ANGULAR TOL A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/09/21 17 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:03:57 16 INCH 15 14 13 12 11 10 9 8 7 EC NO: 645317 DRWN: MKP CHK'D: MJMITCHELL APPR: MJMITCHELL INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 6 2020/08/10 2020/09/21 2020/09/21 MX150 1X3 BLADE SEALED ASSEMBLY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 06-12-02 06-12-02 DRAWING SERIES D-SIZE 33481 5 SD-33481-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R5 SHEET NUMBER CUSTOMER SEE BOM 4 B 2 4 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 RUBBER BOOT CONFIGURATION M M ⌀29.00 �147.89� MIN PASS-THRU WITH NO CLEARANCE L L K K OVERALL MATED SYSTEM WITH BLADE RUBBER BOOT AND RECEPTACALE BACKSHELL J ⌀25.40 �113.64� J MIN PASS-THRU WITH NO CLEARANCE H H OVERALL MATED SYSTEM WITH BLADE RUBBER BOOT G G ⌀29.00 MIN PASS-THRU WITH NO CLEARANCE �B� CHARTED DIMENSIONS CONFIGURATION MX150 1X3 BLADE SEALED ASSEMBLY - STANDARD MX150 1X3 BLADE SEALED ASSEMBLY - RIBBER BOOT CONFIGURATION F B 106.96 110.96 F OVERALL MATED SYSTEM WITH RECEPTACLE BACKSHELL E E ⌀23.45 MIN PASS-THRU WITH NO CLEARANCE �94.78� D D BLADE SEALED ASSEMBLY WITH BLADE RUBBER BOOT C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) MM B 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.1 ± ± 0.3 ± 1 PLACE 0 PLACES ± ± ANGULAR TOL A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/09/21 17 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:03:57 16 INCH 15 14 13 12 11 10 9 8 7 EC NO: 645317 DRWN: MKP CHK'D: MJMITCHELL APPR: MJMITCHELL INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 6 2020/08/10 2020/09/21 2020/09/21 MX150 1X3 BLADE SEALED ASSEMBLY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 06-12-02 06-12-02 DRAWING SERIES D-SIZE 33481 5 SD-33481-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R5 SHEET NUMBER CUSTOMER SEE BOM 4 B 2 5 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 5 6 4 3 2 1 M M BOM L L R5 K J H G F E CAVITY TYPE & STATUS KEYING (X = OPTION PLUGGED) 1 2 3 R5 OPTIONAL ATTACHMENT SOLD SEPARATELY SMP RUBBER BOOT ASSEMBLY PART NUMBER COLOR NOT RECOMMENDED NOT AVAILABLE 33481-3301 BLACK B NOT RECOMMENDED NOT AVAILABLE BROWN C NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0322 33481-0304 GREEN D NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0323 33481-0305 CUSTOM TBD 33481-0306 BLACK A 33481-0307 LT.GRAY 33481-0308 ASSEMBLY PART NUMBER COLOR 33481-0301 BLACK A 33481-0302 LT.GRAY 33481-0303 COMMENTS STATUS CAVITY TYPE & STATUS KEYING (X = OPTION PLUGGED) 1 2 3 OPTIONAL ATTACHMENT SOLD SEPARATELY SMP RUBBER BOOT COMMENTS STATUS A SALEABLE AVAILABLE 33481-3302 LT.GRAY B SALEABLE AVAILABLE NOT AVAILABLE 33481-3303 BROWN C NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0322 NOT AVAILABLE NOT AVAILABLE 33481-3304 GREEN D NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0323 NOT AVAILABLE PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3305 CUSTOM TBD SALEABLE AVAILABLE X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3306 B X PLANNED OBSOLESCENCE NOT AVAILABLE BROWN C X PLANNED OBSOLESCENCE 33481-0309 GREEN D X 33481-0310 CUSTOM TBD 33481-0311 BLACK A 33481-0312 LT.GRAY 33481-0313 A X SALEABLE AVAILABLE 33481-3307 LT.GRAY B X SALEABLE AVAILABLE NOT AVAILABLE 33481-3308 BROWN C X SALEABLE AVAILABLE PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3309 GREEN D X SALEABLE AVAILABLE X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3310 CUSTOM TBD X SALEABLE AVAILABLE X X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3311 B X X PLANNED OBSOLESCENCE NOT AVAILABLE BROWN C X X PLANNED OBSOLESCENCE 33481-0314 GREEN D X X 33481-0315 CUSTOM TBD X 33481-0316 BLACK A X 33481-0317 LT.GRAY B 33481-0318 BROWN 33481-0319 BLACK A X X SALEABLE AVAILABLE 33481-3312 LT.GRAY B X X SALEABLE AVAILABLE NOT AVAILABLE 33481-3313 BROWN C X X SALEABLE AVAILABLE PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3314 GREEN D X X SALEABLE AVAILABLE X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3315 CUSTOM TBD X X SALEABLE AVAILABLE X X NOT RECOMMENDED NOT AVAILABLE 33481-3316 A X X X SALEABLE AVAILABLE X X X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3317 LT.GRAY B X X X SALEABLE AVAILABLE C X X X NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0324 NOT AVAILABLE 33481-3318 BROWN C X X X NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0324 NOT AVAILABLE GREEN D X X X NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0325 NOT AVAILABLE 33481-3319 GREEN D X X X NOT RECOMMENDED NOT RECOMMENDED, SEE P/N 33481-0325 NOT AVAILABLE 33481-0320 CUSTOM TBD X X X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3320 CUSTOM TBD X X X SALEABLE AVAILABLE 33481-0321 BLACK A NOT RECOMMENDED NOT AVAILABLE 33481-3321 SALEABLE AVAILABLE 33481-0322 DK.GRAY C PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3322 DK.GRAY C SALEABLE AVAILABLE 33481-0323 ST.GRAY D PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3323 ST.GRAY D SALEABLE AVAILABLE 33481-0324 DK.GRAY C X X X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3324 DK.GRAY C X X X SALEABLE AVAILABLE 33481-0325 ST.GRAY D X X X PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3325 ST.GRAY D X X X SALEABLE AVAILABLE 33481-0330 YELLOW A PLANNED OBSOLESCENCE NOT AVAILABLE 33481-3330 YELLOW A SALEABLE AVAILABLE 33481-0340 BLACK A NOT RECOMMENDED RUBBER BOOT CONFIGURATION P/N TBD 33481-3340 BLACK A SALEABLE RUBBER BOOT CONFIGURATION P/N TBD 33481-0341 BLACK A PLANNED OBSOLESCENCE RUBBER BOOT CONFIGURATION P/N TBD 33481-3341 BLACK A SALEABLE RUBBER BOOT CONFIGURATION P/N TBD X X X X BLACK BLACK BLACK A X X X X K J H G F E D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) MM B 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.1 ± ± 0.3 ± 1 PLACE 0 PLACES ± ± ANGULAR TOL A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/09/21 17 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:03:57 16 INCH 15 14 13 12 11 10 9 8 7 EC NO: 645317 DRWN: MKP CHK'D: MJMITCHELL APPR: MJMITCHELL INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 6 2020/08/10 2020/09/21 2020/09/21 MX150 1X3 BLADE SEALED ASSEMBLY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 06-12-02 06-12-02 DRAWING SERIES D-SIZE 33481 5 SD-33481-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R5 SHEET NUMBER CUSTOMER SEE BOM 4 B 2 6 OF 7 1 A 20 19 18 17 16 15 14 13 12 11 10 9 7 8 6 5 4 3 2 1 RUBBER BOOT INTERFACE M L M L 10 R0.20 ALL AROUND 21 TOOLING SPLIT LINE LOCATION MAXIMUM SPLIT LINE MISMATCH 0.05 0.80 11 ALL AROUND H 13.60 16 ⌢ ⌀0.30Ⓤ0.10 H T R K K 4X R2.00 50.25° 12 J 17 1.70 9 1.00 ALL AROUND J S 7.00 J 1.00 W W DETAIL 5 SCALE 20:1 H 4X R1.00 18 1.00 1.00 19 H 1.00 20 H SECTION W-W X SEE DETAIL 5 G G F F 15 2.50 14 7.57 E 13 E X H 8.75 SECTION X-X D D C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION C DIMENSION UNITS SCALE mm 2:1 CURRENT REV DESC: SEE REVISION TABLE GENERAL TOLERANCES (UNLESS SPECIFIED) MM B 4 PLACES ± ± 3 PLACES ± ± 2 PLACES ± 0.1 ± ± 0.3 ± 1 PLACE 0 PLACES ± ± ANGULAR TOL A DOCUMENT STATUS FORMAT: Eng-lega-master-tb-prod-D REVISION: E DATE: 2020/01/14 19 P1 RELEASE DATE 18 2020/09/21 17 ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 14:03:57 16 INCH 15 14 13 12 11 10 9 8 7 EC NO: 645317 DRWN: MKP CHK'D: MJMITCHELL APPR: MJMITCHELL INITIAL REVISION: DRWN: DMARCOUX APPR: FHOLUB THIRD ANGLE PROJECTION 6 2020/08/10 2020/09/21 2020/09/21 MX150 1X3 BLADE SEALED ASSEMBLY MAT SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 06-12-02 06-12-02 DRAWING SERIES D-SIZE 33481 5 SD-33481-031 MATERIAL NUMBER PSD 001 GENERAL MARKET 3 R5 SHEET NUMBER CUSTOMER SEE BOM 4 B 2 7 OF 7 1 A