340833001

PRODUCT SPECIFICATION TABLE OF CONTENTS 1.0 Scope 2.0 Product Description 2.1 Product Name and Related Parts 2.2 Dimensions, Materials, Platings and Markings 2.3 Features and Benefits REVISION: A 3.0 Applicable Documents and Specifications 4.0 Safety Agency Approvals 5.0 Ratings / Performance / Validation 6.0 Packaging 7.0 Gages and Fixtures 8.0 Other Information/Miscellaneous ECR/ECN INFORMATION: EC No: UAU2014-1432 DATE: 2014 / 03 / 12 DOCUMENT NUMBER: PS-34083-002 TITLE: SHEET No. MX150 SINGLE WIRE SEAL TERMINAL PRODUCT SPECIFICATION 1 of 6 CREATED / REVISED BY: CHECKED BY: APPROVED BY: A. Dhir M. Vanslambrouck B.Moser TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC PRODUCT SPECIFICATION MX150 SINGLE WIRE SEAL RECEPTACLE AND BLADE TERMINALS 1.0 SCOPE This Product Specification covers the MX150 Single Wire Seal Receptacle and Blade terminals crimped to an array of wires utilizing crimp technology. 2.0 PRODUCT DESCRIPTION Blade Terminal Receptacle Terminal 2.1 PRODUCT NAME AND ATTRIBUTES Terminal Family Gender Sealing Plating Grip Code Special Characteristics Current Rating MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 MX150 Receptacle Receptacle Receptacle Receptacle Receptacle Receptacle Receptacle Receptacle Receptacle Blade Blade Blade Blade Blade Blade Blade Blade Blade Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Single Wire seal Sn Au Ag Sn Au Ag Sn Au Ag Sn Au Ag Sn Au Ag Sn Au Ag 22 22 22 18 18 18 14 14 14 22 22 22 18 18 18 14 14 14 High Performance Sn High Performance Au High Performance Ag High Performance Sn High Performance Au High Performance Ag High Performance Sn High Performance Au High Performance Ag High Performance Sn High Performance Au High Performance Ag High Performance Sn High Performance Au High Performance Ag High Performance Sn High Performance Au High Performance Ag 12.5A 12.5A 12.5A 16.5A 16.5A 16.5A 21A 21A 21A 12.5A 12.5A 12.5A 17A 17A 17A 21A 21A 21A REVISION: A ECR/ECN INFORMATION: EC No: UAU2014-1432 DATE: 2014 / 03 / 12 DOCUMENT NUMBER: PS-34083-002 TITLE: SHEET No. MX150 SINGLE WIRE SEAL TERMINAL PRODUCT SPECIFICATION 2 of 6 CREATED / REVISED BY: CHECKED BY: APPROVED BY: A. Dhir M. Vanslambrouck B.Moser TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC PRODUCT SPECIFICATION 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS All dimensions, terminal materials, plating descriptions and ID locations can be found on the applicable sales drawing. 2.3 FEATURES AND BENEFITS • High performance copper alloy • One piece terminal design • Molex cavity compatible • High current carrying capability • Validated to USCAR-21 crimp performance requirements across a wide array of wires • Validated to USCAR-2 terminal performance requirements 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS Document Number Receptacle Blade SD-34083-002 SD-34080-001 Description Sales Drawing Application Specification (Crimp) Packaging Specification AS-34083-002 AS-34080-001 PK-31300-516 4.0 SAFETY AGENCY APPROVALS Agency CSA File Number TUV License number UL File Number IMDS Environmental Compliance REVISION: A ECR/ECN INFORMATION: EC No: UAU2014-1432 DATE: 2014 / 03 / 12 DOCUMENT NUMBER: PS-34083-002 Approval Status Not Applicable Not Applicable Not Applicable Available upon request Available on molex.com TITLE: SHEET No. MX150 SINGLE WIRE SEAL TERMINAL PRODUCT SPECIFICATION 3 of 6 CREATED / REVISED BY: CHECKED BY: APPROVED BY: A. Dhir M. Vanslambrouck B.Moser TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC PRODUCT SPECIFICATION 5.0 RATINGS / PERFORMANCE / VALIDATION 5.1 ELECTRICAL Description Operating Voltage Crimp Resistance Item 5.1.1 5.1.2 5.1.3 Condition Applied voltage during operation Post environment crimp resistance Rating 14 Volts DC Maximum Change in crimp resistance ≤ 0.33mΩ or ≤ 0.55mΩ crimp resistance. TERMINAL CURRENT DERATING CURVES This test is used to determine the maximum test current at which a terminal system can operate in a room temperature environment before excessive thermal degradation and/or resistance begins to occur. Temperature Rise (Y axis) vs. Current (X axis) shall be plotted for each applicable conductor size. CAUTION: These graphs are NOT to be used for actual terminal application in a vehicle. This test is conducted on terminals alone, thus eliminating the variation that may be introduced by variations in the heat dissipating characteristics of differing connector housing designs and sizes. This test cannot establish the Maximum Current Capability of a specific terminal application. For specific applications, several factors other than current load must be considered (see SAE/USCAR-2 appendix F for more information). 5.1.3.1 SAE WIRES TERMINAL USCAR DERATING CURVE REVISION: A ECR/ECN INFORMATION: EC No: UAU2014-1432 DATE: 2014 / 03 / 12 DOCUMENT NUMBER: PS-34083-002 TITLE: SHEET No. MX150 SINGLE WIRE SEAL TERMINAL PRODUCT SPECIFICATION 4 of 6 CREATED / REVISED BY: CHECKED BY: APPROVED BY: A. Dhir M. Vanslambrouck B.Moser TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC PRODUCT SPECIFICATION 5.1.3.2 ISO WIRES TERMINAL USCAR DERATING CURVE 5.2 TEMPERATURE Sn Plated Terminal Non-operating temperature: - 40°C to +125°C Operating temperature: - 40°C to +125°C Au & Ag Sn Plated Terminals Non-operating temperature: - 40°C to +155°C Operating temperature: - 40°C to +155°C **For terminal validation information contact your Molex Sales Engineer **For connector system level performance see related product specification 6.0 PACKAGING Parts are packaged to protect against damage during handling, transit and storage. Please refer to PK31300-516 reel wind direction. Terminals on reels should be stored in original packaging until ready for use. Storage temperature is recommended between 65 and 95°F (18 and 35°C) and storage humidity at less than 85% relative humidity. Under these conditions Molex recommended shelf life is 12 months from manufacturing date on terminal reel. REVISION: A ECR/ECN INFORMATION: EC No: UAU2014-1432 DATE: 2014 / 03 / 12 DOCUMENT NUMBER: PS-34083-002 TITLE: SHEET No. MX150 SINGLE WIRE SEAL TERMINAL PRODUCT SPECIFICATION 5 of 6 CREATED / REVISED BY: CHECKED BY: APPROVED BY: A. Dhir M. Vanslambrouck B.Moser TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC PRODUCT SPECIFICATION 7.0 GAGES AND FIXTURES Gages and Fixtures are referenced in the appropriate control plans of the receptacle terminals. For terminal electrical checking, please refer to the related connector application specification. 8.0 OTHER INFORMATION / MISCELLANEOUS MOLEX REPRESENTS AND WARRANTS TO BUYER FOR A PERIOD OF ONE (1) YEAR FROM THE DATE OF DELIVERY OF THE PRODUCTSTHAT: 1) THE PRODUCTS SHALL CONFORM TO THE MOLEX SPECIFICATIONS FOR THE PRODUCTS IN FORCE AT THE DATE OF DELIVERY OF THE PRODUCTS TO BUYER, AND 2) THE PRODUCTS SHALL BE FREE FROM DEFECTS IN MATERIALS AND MANUFACTURING. EXCEPT AS EXPRESSLY PROVIDED ABOVE, MOLEX MAKES NO WARRANTY, EXPRESS OR IMPLIED, REGARDING THE PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. IN ADDITION, MOLEX EXPRESSLY DISCLAIMS ANY WARRANTY OBLIGATIONS IN THOSE INSTANCES WHERE THE FAILURES RESULTED FROM THE MODIFICATION OF THE PRODUCTS BY BUYER OR ITS CUSTOMERS, IMPROPER HANDLING, USE OR INSTALLATION OF THE PRODUCTS BY BUYER OR ITS CUSTOMERS, OR ANY OTHER CAUSE BEYOND THE CONTROL OF MOLEX. REVISION: A ECR/ECN INFORMATION: EC No: UAU2014-1432 DATE: 2014 / 03 / 12 DOCUMENT NUMBER: PS-34083-002 TITLE: SHEET No. MX150 SINGLE WIRE SEAL TERMINAL PRODUCT SPECIFICATION 6 of 6 CREATED / REVISED BY: CHECKED BY: APPROVED BY: A. Dhir M. Vanslambrouck B.Moser TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.2).DOC