340833002

12 11 10 9 GENDER FAMILY CARRIER BUMP DIRECTION POINTS DOWN FOR TIN PLATED TERMINALS, POINTS UP FOR PRECIOUS PLATED TERMINALS H 7 8 SEALING PLATING 9.60 Sn 50 1.83 CONTACT POINT MX150 SECTION A-A G RECEPTACLE WIRE SEAL Ag 33 B 2X 7.50±0.15 A F C RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) RIGHT (B) LEFT (D) 34081-2004 34081-3004 34081-2003 34081-3003 34081-4003 34081-5003 34081-4002 34081-5002 34081-4001 34081-5001 Au 18 19.85±0.25 4 3 TABLE 1 - TERMINAL PART NUMBER AND DIMENSION REFERENCE PAYOFF GRIP A PART NUMBER WIRE SIZES* DIRECTION CODE ±0.3 RIGHT (B) 34083-2003 22AWG 22 2.5 0.35-0.50mm² LEFT (D) 34083-3003 RIGHT (B) 20/18AWG 34083-2002 18 3.3 0.75-1.00mm² LEFT (D) 34083-3002 RIGHT (B) 16/14AWG 34083-2001 14 3.6 1.50-2.00mm² LEFT (D) 34083-3001 RIGHT (B) 34081-2005 22AWG 22 2.5 0.35-0.50mm² LEFT (D) 34081-3005 34 23 N 5 6 A 2 B ±0.20 C ±0.3 D N ±0.15 ±0.10 4.85 0.9 2.90 0.55 5.00 1.3 2.90 0.70 5.00 1.7 2.90 0.90 4.85 0.9 2.90 0.55 5.00 1.3 2.90 0.70 18 20/18AWG 0.75-1.00mm² 3.3 14 16/14AWG 1.50-2.00mm² 3.6 5.00 1.7 2.90 0.90 22 22AWG 0.35-0.50mm² 2.5 4.85 0.9 2.90 0.55 18 20/18AWG 0.75-1.00mm² 3.3 5.00 1.3 2.90 0.70 14 16/14AWG 1.50-2.00mm² 3.6 5.00 1.7 2.90 0.90 1 SPECIAL CHARACTERISTICS H HIGH PERFORMANCE Sn HIGH PERFORMANCE Au G HIGH PERFORMANCE Ag F * SEE AS-34083-002 FOR SPECIFIC WIRE TYPES (3.75) NOTES: (UNLESS OTHERWISE SPECIFIED) 6. MEETS PERFORMANCE SPECIFICATION FOR CABLE TO TERMINAL ELECTRICAL CRIMPS 1. MATING TERMINAL SHOWN ON DRAWING SD-34080-001 PER SAE/USCAR-21 (5/2002) 2. MATERIAL: ASTM B422, UNS C19025, HR04 C E 32 2X 1.5 B 7. MEETS PERFORMANCE STANDARD FOR THICKNESS: 0.30 mm ±0.01 AUTOMOTIVE ELECTRICAL CONNECTOR TEMPER: FULL HARD (REF) SYSTEMS FOR SAE/USCAR-2 REV. 4 TENSILE: 496 MIN MPA (TEMP CLASS 3) (5/2004) 3. TIN PLATED TERMINAL FINISH STAMP PLATING TYPE (Au-GOLD), (Sn-TIN) OR (Ag-SILVER) IN THIS AREA 11 8. MEETS ELECTRICAL CONNECTION SYSTEM OVERALL UNDERPLATE ELECTRODEPOSITED NICKEL 2.55±0.07 E DESIGN SPECIFICATION (SDS) REV.11 (5/2002) OVERALL ELECTRODEPOSITED REFLOW TIN 9. MEETS FIELD CORRELATED LIFE TEST (FCLT) PER D 19 2.80±0.07 3.30±0.07 36 4. GOLD PLATED TERMINAL FINISH SAE/USCAR-20 (6/2004) DUCTILE SULFAMATE NICKEL 10. INSERTION FORCE WITH INLINE BLADE TERMINAL: CONTACT AREA - ELECTRODEPOSITED GOLD AVG. FORCE 3.1 N TIN (REFERENCE) GRIP AREA - ELECTRODEPOSITED 100% 2.7 N GOLD (REFERENCE) TIN MATTE FINISH 5 16 B 2.9 N SILVER (REFERENCE) 5. SILVER PLATED TERMINAL FINISH A C D OVERALL UNDERPLATE ELECTRODEPOSITED 11. REFERENCE FORD CAVITY SPECIFICATION OVERALL UNDERPLATE ELECTRODEPOSITED C 97BG-14474-ADA DUCTILE SULFAMATE NICKEL CONTACT AREA - ELECTRODEPOSITED PURE SILVER 12. REFERENCE AS-34083-002 FOR CRIMP INFORMATION (0.5% MAX IMPURITIES) SEMI- 4 15 ⌀C ⌀D SECTION B-B SECTION C-C Scale 5:1 Scale 5:1 BRIGHT FINISH 13. REFERENCE PK-31300-516 FOR REEL DIRECTION - SILVER ANTI-TARNISH : EVABRITE GRIP AREA - ELECTRODEPOSITED 100% 14. REFERENCE PS-34083-002 FOR PRODUCT SPECIFICATION TIN MATTE FINISH B B SYMBOLS = 0 = 0 = 0 (11.43) PROGRESSION A P1 RELEASE DATE 11 2019/12/23 10 18:21:18 C 9 8 7 6 mm 3:1 = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.10 0.3 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 628017 DRWN: NVENKATESHSH CHK'D: TOMSMITH APPR: TOMSMITH INITIAL REVISION: DRWN: KFERGUSON APPR: BMOSER THIRD ANGLE PROJECTION 4 2019/05/11 2019/12/23 2019/12/23 MX 150 RECEPTACLE CABLE SEAL PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2009/04/14 2009/04/14 DRAWING SERIES C-SIZE 34083 3 SD-34083-002 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 B2 SHEET NUMBER 1 OF 1 1 A