3930-3056

12 11 10 9 7 8 5 6 4 3 2 1 SEE NOTE 6 .165 (4.20) 2 .378 (9.60) .520 (13.20) .772 (19.60) SEE NOTE 11 H SEE NOTE 11 OPTIONAL SELECT GOLD AREA OPTIONAL SELECT GOLD AREA G H OPTIONAL SELECT TIN AREA G OPTIONAL SELECT TIN AREA F F E E . VIEWED FROM COMPONENT SIDE 400 = NYLON 6/6, U.L. 94V-O. COLOR: BLACK. 4-12 CIRCUIT PART G, GS - .000030/(.00076) MIN. SELECT GOLD AND .000100/(.00127) MIN. SELECT MATTE TIN OVER .000050/(.00127) MIN NICKEL OVERALL. D D 2 CIRCUIT G2, GS2 - .00015/(.00038) MIN. SELECT GOLD AND .000100/(.00254) MIN. SELECT MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. VIEWED FROM COMPONENT SIDE RM - .000060/(.00152) MIN REFLOWED MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. BLANK, S, MS - .000100/(.00254)MIN. MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. C 2 .287±.003 7.30±0.08 3 4) PACKAGING SPECIFICATION : BULK PACK PER PK-5569-002 TRAY PACK PER PK-5569-005 APPLIES TO ALL #4 OR M3 SELF TAPPING SCREWS. B CIRCUIT SIZES 2 7) DISCOLORATION IN THE BANDOLIER CARRIER AREA OF THE PIN IS INHERENT TO THE PLATING PROCESS AND IS DUE TO THE MASKING EFFECT OF THE CARRIER. THIS DISCOLORATION IS IN A NON-FUNCTIONAL AREA OF THE PIN AND WILL NOT AFFECT THE PERFORMANCE OF THE HEADER ASSEMBLY. .118±.002 3.00±0.05 .083±.003 2.10±0.08 4 PLACES 5 C BOTH PEGGED VIEWED FROM COMPONENT SIDE 2 CIRCUIT PART AND FLANGED B 8) CONNECTORS ARE NOT TO BE MATED OR UNMATED WHILE CIRCUIT ARE LIVE. SYMBOLS 9) PARTS NOT DESIGNED FOR CURRENT SHARING. = 0 10) PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. = 0 11) FORMING MARKS ON PINS ARE ACCEPTABLE = 0 = 0 12 CORNER CORE-OUTS ARE OPTIONAL AND MAY OR = 0 MAY NOT BE PRESENT. A 13) TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON PART NUMBER AND/OR TOOL. DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/02/22 10 IN/MM 2:1 THIS DRAWING REPLACES DRAWING SDA-5569-NL* 8 7 6 C MM INCH 4 PLACES ± ± 3 PLACES ± ± 0.015 2 PLACES ± 0.38 ± 1 PLACE ± ± = 0 0 PLACES ± ± = 0 CURRENT REV DESC: MIGRATE TO ECTR GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL 21:31:14 9 SCALE = 0 = 0 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2017/10/06 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 172489 DRWN: AZAHIROVIC CHK'D: JBELL APPR: FSMITH INITIAL REVISION: DRWN: KSS APPR: RAS THIRD ANGLE PROJECTION 4 2018/02/09 2018/02/20 2018/02/22 RIGHT ANGLE HEADER ASSY (SINGLE ROW) (MINI-FIT JR. SERIES) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2/14/89 2/14/89 DRAWING SERIES C-SIZE 5569 3 55690004-SD MATERIAL NUMBER PSD 000 CUSTOMER SEE CHARTS 2 A SHEET NUMBER GENERAL MARKET 1 OF 2 1 A 12 11 10 9 7 8 5 6 4 3 2 1 UL94V-0 UL94V-2 PACKAGING OPTION 2 PACKAGING OPTION 2 H H SCREW MOUNT POSITIVE LOCK SCREW MOUNT POSITIVE LOCK MS MS 50-30-4469 NO E.D.P. BULK BULK NICKEL NICKEL NO E.D.P. NO E.D.P. BULK BULK 5569-04A3MS-210 5569-05A3MS-210 4 5 SCREW SCREW POSITIVE POSITIVE TIN/NICKEL TIN/NICKEL 94V-0 94V-0 BULK BULK 5569-04A3GS-210 5569-05A3GS-210 4 5 SCREW SCREW POSITIVE POSITIVE 30 GOLD 30 GOLD 94V-0 94V-0 BULK BULK G G PEG MOUNT POSITIVE LOCK PEG MOUNT POSITIVE LOCK NICKEL NICKEL 46999-0709 5569-02A4G 2 PEGS POSITIVE 46999-0710 5569-06A4G 6 PEGS POSITIVE 30 GOLD 30 GOLD 30 GOLD 30 GOLD F 94V-2 94V-2 BULK BULK 46999-0703 TRAY BULK BULK TRAY 46999-0704 46999-0711 5569-02A4MS-210 MS MS 5569-06A4MS-210 5569-02A4G-210 46999-0712 E 46999-0713 46999-0100 46999-0714 5569-02A4MS 5569-05A4MS 5569-06A4MS 2 5 6 PEGS PEGS PEGS POSITIVE POSITIVE POSITIVE 46999-0098 5569-05A4RM 5 PEGS POSITIVE TIN/NICKEL TIN/NICKEL TIN/NICKEL REFLOW/NICKEL 94V-2 94V-2 94V-2 TRAY BULK TRAY 94V-2 BULK 5569-04A4GS-400 5569-05A4GS-400 46999-0707 46999-0288 46999-0289 46999-0708 5569-02A4MS-400 5569-04A4MS-400 5569-05A4MS-400 5569-06A4MS-400 PEGS POSITIVE 6 2 PEGS PEGS POSITIVE POSITIVE 6 5569-06A4G-210 46999-0432 50-30-4436 2 2 6 PEGS 94V-0 TIN/NICKEL NICKEL NICKEL TIN/NICKEL 30 GOLD 30 GOLD 30 GOLD 30 GOLD POSITIVE TRAY BULK BULK TRAY TRAY BULK BULK TRAY 94V-0 94V-0 94V-0 PEGS PEGS POSITIVE POSITIVE 30 GOLD 30 GOLD 94V-0 94V-0 BULK BULK PEGS POSITIVE TIN/NICKEL 94V-0 TRAY BULK BULK TRAY PEGS POSITIVE TIN/NICKEL 94V-0 F E PEG MOUNT, PASSIVE LOCK D D MS MS NICKEL NICKEL BULK BULK BULK BULK S S C C B B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM 4 PLACES ± ± 3 PLACES ± ± 0.015 2 PLACES ± 0.38 DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/02/22 10 21:31:14 C 9 8 7 6 ± 1 PLACE ± ± = 0 0 PLACES ± ± ANGULAR TOL FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2017/10/06 INCH = 0 = 0 = 0 CURRENT REV DESC: MIGRATE TO ECTR ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 172489 DRWN: AZAHIROVIC CHK'D: JBELL APPR: FSMITH INITIAL REVISION: DRWN: KSS APPR: RAS THIRD ANGLE PROJECTION 4 2018/02/09 2018/02/20 2018/02/22 RIGHT ANGLE HEADER ASSY (SINGLE ROW) (MINI-FIT JR. SERIES) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2/14/89 2/14/89 DRAWING SERIES C-SIZE 5569 3 55690004-SD MATERIAL NUMBER PSD 000 CUSTOMER SEE CHARTS 2 A SHEET NUMBER GENERAL MARKET 2 OF 2 1 A