39531-0004

PRODUCT SPECIFICATION PRODUCT SPECIFICATION FOR ESE EUROSTYLE TERMINAL BLOCKS 395XX PLUGS AND PCB HEADERS 1.0 SCOPE This Product Specification covers the following centerline (pitch) ESE Terminal Block Connector Series with Tin or Gold plating 3.50 mm (.138 inch) 5.00 mm (.197 inch) 3.81 mm (.150 inch) 5.08 mm (.200 inch) 2.0 PRODUCT DESCRIPTION 2.1 ESE PCB EUROSTYLE TERMINAL BLOCKS 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS A. ALL OF THESE ITEMS ARE DESCRIBED ON THE INDIVIDUAL SALES DRAWINGS I. ALL DIMENSIONS HAVE BEEN VERIFIED B. MATERIALS USED I. HOUSINGS – BLACK OR GREEN A. STANDARD PLUGS AND HEADERS: NYLON 6/6, UL94V-0 B. SURFACE MOUNT COMPATIBLE PLUGS & HEADERS NYLON 4/6, UL94V-0 II. CONTACTS: COPPER ALLOY C. CONTACT PLATING: I.TIN II. GOLD 2.3 SAFETY AGENCY APPROVALS A. UL FILE #E48521 – RECOGNIZED B. CSA FILE# 233512, CLASS #6228-01 3.0 RATINGS 3.1 VOLTAGE RATING 300 Volts AC 3.2 CURRENT RATING BY PITCH 3.50 mm (.138 inch) - 8.0 AMPS 3.81 mm (.150 inch) - 8.0 AMPS 5.00 mm (.197 inch), FIXED - 15 AMPS 5.08 mm (.200 inch), FIXED - 15 AMPS 5.00 mm (.197 inch), PLUG AND HEADER - 18 AMPS 5.08 mm (.200 inch), PLUG AND HEADER - 18 AMPS 3.3 TEMPERATURE Operating: STANDARD PLUGS AND HEADERS - 40°C to + 105°C SURFACE MOUNT PLUGS AND HEADERS - 40°C to + 140°C REVISION: D ECR/ECN INFORMATION: EC No: IPG2017-0757 DATE: 2017 / 02 / 07 DOCUMENT NUMBER: PS-39500-001 TITLE: PRODUCT SPECIFICATION FOR ESE EUROSTYLE TERMINAL BLOCKS SHEET No. 1 of 2 CREATED / REVISED BY: CHECKED BY: APPROVED BY: C YORK/RSTONE J MACNEIL J MACNEIL TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 4.0 PERFORMANCE 4.1 ELECTRICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT 1 Contact Resistance Per: IEC 60515-2 8 milliohms MAXIMUM [initial] 2 Insulation Resistance Per: IEC60998-1 500 VDC min. 500 Megohms max 3 Dielectric Withstanding Voltage Per: UL1059-12 2.5Kv, 60 Hz for 1 minute 4 Temperature Rise Per: UL1059-1, 12AWG @ 18A 5 Surge Voltage Per: IEC60947-1 Temperature rise: +30°C MAXIMUM 4.0Kv, 5 times for positive and passive poles for 5 seconds 4.2 MECHANICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION 6 Screw Torque Per: UL1059-15, 7 Secureness test 8 Pullout test 9 Aging test REQUIREMENT 5.5 in lbs. 5 times 12AWG & 30AWG wire 12AWG, mass: .09 kgf, height 279mm, bushing dia.: 9.5mm, time: 15 min. Per: UL486E- 12. Per: UL486E- 14 12AWG: 6.2kgf for 1 min. 30AWG: 0.3kgf for 1 min. Per: CSA C22.2 No. 159-1987 105°C ±1° for 7 days 5.0 PACKAGING Parts shall be packaged to protect against damage during handling, transit and storage. REVISION: D ECR/ECN INFORMATION: EC No: IPG2017-0757 DATE: 2017 / 02 / 07 DOCUMENT NUMBER: PS-39500-001 TITLE: PRODUCT SPECIFICATION FOR ESE EUROSTYLE TERMINAL BLOCKS SHEET No. 2 of 2 CREATED / REVISED BY: CHECKED BY: APPROVED BY: C YORK/RSTONE J MACNEIL J MACNEIL TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC