42410-8312

12 H G 11 10 9 7 8 NOTES: 1) MATERIALS: HOUSING PARTS ARE MADE OF POLYESTER, RATED U.L. 94 V-0, COLOR IS BLACK; TERMINALS ARE 0.38 mm THICK PHOSPHOR BRONZE. 2) TERMINAL PLATING OPTIONS PER ES-88-***: A - SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. 3) THESE MODULAR JACKS MEET THE PERFORMANCE REQUIREMENTS OF MOLEX PRODUCT SPECIFICATION PS-42410. 4) CONNECTORS ARE TO BE PACKED IN THERMOFORMED TRAYS, PER PACKAGING SPECIFICATION PK-42410-492. 5) ALL JACKS ARE DESIGNED TO BE USED WITH 1.57mm OR 3.18 mm THICK P.C. BOARDS. 6) ALL JACKS CONFORM TO AND ACCEPT PLUGS WHICH CONFORM TO FCC RULES AND REGULATIONS PART 68, SUBPART F, WHEN PLATED WITH 1.27 MICROMETERS GOLD. 7) ALL JACKS MUST BE CAPABLE OF FITTING INTO MOLEX GAGE G-42410 (CONNECTOR SIZE 4). 8) SEE SHEETS 2 & 4 FOR CONNECTOR SIZE 6. 9) SEE SHEETS 3 & 4 FOR CONNECTOR SIZE 8. 10) SEE SHEET 4 FOR ASSEMBLY ITEM NUMBERS. 11) PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. +0.38 12) ENGRAVED NUMBERS ON HOUSING BODY ARE FOR MOLDING IDENTIFICATON ONLY, 11.81 -0.00 THEY ARE NOT INTENDED FOR ASSEMBLY IDENTIFICATION PURPOSES. 7.62 REF. 13) ALL UNTOLERANCED DIMENSIONS ARE SHOWN FOR REFERENCE ONLY. 5 6 4 2 1 P.C. BOARD THICKNESS DIM. "D" (MTG PEGS) DIM. "F" (P.C. TAILS) CONNECTOR SIZE CIRCUIT SIZE DIM. "G" 1.57 3.25 3.05 +0.38/-0.63 4 4 3.81 3.18 4.85 5.21 +0.38/-0.63 H SIZE 4 VERTICAL MODJACK ASSEMBLIES 10.80 PART CHARACTERISTICS "X"= ASSEMBLY ITEM NOT NUMBER TOOLED EXTERNAL CONNECTOR SIZE NUMBER OF POSITIONS P.C. BOARD THICKNESS MOUNTING EARS OPTION TERMINAL PLATING OPTION G 42410-4168 4 POS. BODY 4 1.57 YES A 42410-4170 4 POS. BODY 4 1.57 NO A 11.43 13.97 R0.63 MAX. TYP. MOUNTING EARS ARE OPTIONAL PRINTED CIRCUIT BOARD F 3 F 15.88 1.45 BASIC CL 16.64 +0.38 -0.00 16.38 13.21 C E E "F" "D" 3.81 BASIC 0.41 ±0.05 TYP. 0.38 ±0.05 TYP. PANEL PANEL CUT-OUT FOR CONNECTOR SIZE 4 D D CIRCUIT NO. 1 (LOCATED AT THIS END OF CONNECTOR) ⌀3.25±0.08 (2 PLACES) 6.55 6.35 TYP. 7.62±0.10 1.27 TYP. 8.89±0.08 TYP. "G" C C 6.35±0.08 TYP. 8.89 TYP. CIRCUIT NO. 1 SIZE 4 MODULAR JACK LOADED WITH 4 TERMINALS SHOWN ABOVE ⌀0.89±0.08 TYP. 3.18±0.05 B B (SEE SHEET 4 FOR PART NUMBER AVAILABILITY) 1.27±0.05 TYP. FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATION. “G”±0.05 TYP. TOLERANCES ARE NOT ACCUMULATIVE = = P.C. BOARD LAYOUT FOR CONNECTOR SIZE 4 A PREVIOUS DRAWING: SDA-42410-XXXX DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 11 2022/05/31 10 13:36:19 9 8 7 6 0 mm 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± = VIEWED FROM COMPONENT SIDE 0 0 1 PLACE ± 0 PLACES ± 0.5 ° 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 707240 DRWN: FAYEW CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: FAYEW APPR: KLANG THIRD ANGLE PROJECTION 4 2022/05/19 2022/05/31 2022/05/31 ASSEMBLY; VERTICAL MODULAR JACKS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022/05/19 2022/05/31 DRAWING SERIES C-SIZE 42410 3 424108312 MATERIAL NUMBER PSD 000 CUSTOMER SEE CHART 2 N4 SHEET NUMBER GENERAL MARKET 1 OF 3 1 A 12 H G F 10 11 9 8 NOTES: 1) MATERIALS: HOUSING PARTS ARE MADE OF POLYESTER, RATED U.L. 94 V-0, COLOR IS BLACK; TERMINALS ARE 0.38mm THICK PHOSPHOR BRONZE. 2) TERMINAL PLATING OPTIONS PER ES-88-***: A - SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. B - SELECT GOLD IN CONTACT AREA: 0.38 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. 3) THESE MODULAR JACKS MEET THE PERFORMANCE REQUIREMENTS OF MOLEX PRODUCT SPECIFICATION PS-42410. 4) CONNECTORS ARE TO BE PACKED IN THERMOFORMED TRAYS, PER PACKAGING SPECIFICATION PK-42410-492. 5) ALL JACKS ARE DESIGNED TO BE USED WITH 1.57 mm OR 3.18 mm THICK P.C. BOARDS. 6) ALL JACKS CONFORM TO AND ACCEPT PLUGS WHICH CONFORM TO FCC RULES AND REGULATIONS PART 68, SUBPART F, WHEN PLATED WITH 1.27 MICROMETERS GOLD. 7) ALL JACKS MUST BE CAPABLE OF FITTING INTO MOLEX GAGE G-42410 (CONNECTOR SIZE 4). 8) SEE SHEETS 1 & 4 FOR CONNECTOR SIZE 4. 9) SEE SHEETS 3 & 4 FOR CONNECTOR SIZE 8. 10) SEE SHEET 4 FOR ASSEMBLY ITEM NUMBERS. 11) PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 12) ENGRAVED NUMBERS ON HOUSING BODY ARE FOR MOLDING IDENTIFICATON ONLY, THEY ARE NOT INTENDED FOR ASSEMBLY IDENTIFICATION PURPOSES. 13) ALL UNTOLERANCED DIMENSIONS ARE SHOWN FOR REFERENCE ONLY. 13.84 7 5 6 4 3 2 P.C. BOARD THICKNESS DIM. "D" (MTG PEGS) DIM. "F" (P.C. TAILS) 1.57 3.25 3.05 +0.38/-0.63 3.18 4.85 1 CONNECTOR SIZE CIRCUIT SIZE DIM. "G" 6 6 6.35 6 4 3.81 6 2 1.27 5.21 +0.38/-0.63 H 10.80 SIZE 6 VERTICAL MODJACK ASSEMBLIES PART CHARACTERISTICS "X"= ASSEMBLY ITEM NOT NUMBER TOOLED EXTERNAL CONNECTOR SIZE NUMBER OF POSITIONS P.C. BOARD THICKNESS MOUNTING EARS OPTION TERMINAL PLATING OPTION G 42410-6168 6 POS. BODY 6 1.57 YES A 42410-6170 6 POS. BODY 6 1.57 NO A 42410-6314 6 POS. BODY 4 1.57 NO A 42410-6456 6 POS. BODY 2 1.57 YES A 13.46 16.00 F 15.88 +0.38 -0.00 MOUNTING EARS ARE OPTIONAL 10.16 REF. R0.63 MAX. TYP. PRINTED CIRCUIT BOARD 16.38 E E 13.21 1.45 BASIC CL 16.64 +0.38 -0.00 "F" "D" CL 0.41 ±0.05 TYP. CIRCUIT NO. 1 (LOCATED AT THIS END OF CONNECTOR) 0.38 ±0.05 TYP. D D 6.55 6.35 TYP. 5.08 BASIC PANEL 1.27 TYP. PANEL CUT-OUT FOR CONNECTOR SIZE 6 "G" 10.16 ±0.10 C C ⌀3.25±0.08 (2 places) 6.35±0.08 TYP. 8.89 TYP. 8.89±0.08 TYP. CIRCUIT NO. 1 SIZE 6 MODULAR JACK LOADED WITH 6 TERMINALS SHOWN ABOVE ⌀ 0.89±0.08 TYP. B 1.27±0.05 TYP. 4.45 ±0.05 "G" ±0.05 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATION. TOLERANCES ARE NOT ACCUMULATIVE = = P.C. BOARD LAYOUT FOR CONNECTOR SIZE 6 A DOCUMENT STATUS 12 P1 RELEASE DATE 11 2022/05/31 10 0 0 mm 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± = VIEWED FROM COMPONENT SIDE FORMAT: master-tb-prod-C REVISION: J1 DATE: 2021/05/01 0 1 PLACE ± 0 PLACES ± 0.5 ° 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 13:36:19 9 B (SEE SHEET 4 FOR PART NUMBER AVAILABILITY) 8 7 6 5 EC NO: 707240 DRWN: FAYEW CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: FAYEW APPR: KLANG THIRD ANGLE PROJECTION 4 2022/05/19 2022/05/31 2022/05/31 ASSEMBLY; VERTICAL MODULAR JACKS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022/05/19 2022/05/31 DRAWING SERIES C-SIZE 42410 3 424108312 MATERIAL NUMBER PSD 000 CUSTOMER SEE CHART 2 N4 SHEET NUMBER GENERAL MARKET 2 OF 3 1 A 12 H G 10 11 9 8 7 5 6 4 NOTES: P.C. BOARD DIM. "D" (MTG. THICKNESS PEGS) 1) MATERIALS: HOUSING PARTS ARE MADE OF POLYESTER, RATED U.L. 94 V-0, COLOR IS BLACK; TERMINALS ARE 0.38 mm THICK PHOSPHOR BRONZE. 1.57 3.25 2) TERMINAL PLATING OPTIONS PER ES-88-***: 3.18 4.85 A - SELECT GOLD IN CONTACT AREA: 1.27 MICROMETERS MIN., SELECT MATTE TIN IN PC TAIL AREA: 2.54 MICROMETERS MIN., WITH OVERALL NICKEL UNDERPLATE: 1.27 MICROMETERS MIN. 3) THESE MODULAR JACKS MEET THE PERFORMANCE REQUIREMENTS OF MOLEX PRODUCT SPECIFICATION PS-42410. 4) CONNECTORS ARE TO BE PACKED IN THERMOFORMED TRAYS, PER PACKAGING SPECIFICATION PK-42410-492. 5) ALL JACKS ARE DESIGNED TO BE USED WITH 1.57 mm OR 3.18 mm THICK P.C. BOARDS. 6) ALL JACKS CONFORM TO AND ACCEPT PLUGS WHICH CONFORM TO FCC RULES AND REGULATIONS SIZE 8 VERTICAL MODJACK ASSEMBLIES PART 68, SUBPART F, WHEN PLATED WITH 50 MICROINCHES GOLD. PART CHARACTERISTICS 7) ALL JACKS MUST BE CAPABLE OF FITTING INTO MOLEX GAGE G-42410 (CONNECTOR SIZE 4). ASSEMBLY "X"=NOT 8) SEE SHEETS 1 & 4 FOR CONNECTOR SIZE 4. EXTERNAL NUMBER ITEM P.C. BOARD KEYING TOOLED OF 9) SEE SHEETS 2 & 4 FOR CONNECTOR SIZE 6. NUMBER CONNECTO THICKNESS OPTION R SIZE POSITIONS 10) SEE SHEET 4 FOR ASSEMBLY ITEM NUMBERS. 8 POS. 11) PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 42410-8312 8 1.57 NO BODY 12) ENGRAVED NUMBERS ON HOUSING BODY ARE FOR MOLDING IDENTIFICATON ONLY, 8 POS. 42410-8314 8 1.57 NO THEY ARE NOT INTENDED FOR ASSEMBLY IDENTIFICATION PURPOSES. BODY 13) ALL UNTOLERANCED DIMENSIONS ARE SHOWN FOR REFERENCE ONLY. F 15.88 3 2 1 DIM. "F" (P.C. TAILS) 3.05 +0.38/-0.63 H 5.21 +0.38/-0.63 10.80 G MOUNTIN TERMINAL PLATING G EARS OPTION OPTION YES A NO A 15.49 18.03 F +0.38 -0.00 R0.63 MAX. TYP. 11.43 REF. PRINTED CIRCUIT BOARD KEYING SLOT IS OPTIONAL MOUNTING EARS ARE OPTIONAL (SEE CHARACTERISTICS LEGEND) 15.88 E E CL 1.45 BASIC 16.64 +0.38 -0.00 CL 16.38 13.21 D 5.72 BASIC 0.41 ±0.05 TYP. PANEL 0.38 ±0.05 TYP. CIRCUIT NO. 1 (LOCATED AT THIS END OF CONNECTOR) PANEL CUT-OUT FOR CONNECTOR SIZE 8 D "F" "D" 6.55 6.35 TYP. 11.43±0.10 ⌀ 3.25 ±0.08 (2 PLACES) 1.27 TYP. C C 8.89 8.89±0.08 TYP. 6.35±0.08 TYP. 8.89 TYP. SIZE 8 MODULAR JACK LOADED WITH 8 TERMINALS SHOWN ABOVE CIRCUIT NO. 1 B (SEE SHEET 4 FOR PART NUMBER AVAILABILITY) FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: MIGRATION. ⌀0.89±0.08 TYP. 5.08±0.05 = 1.27±0.05 TYP. "G"±0.05 A = VIEWED FROM COMPONENT SIDE DOCUMENT STATUS 12 P1 RELEASE DATE 11 2022/05/31 10 0 mm 3:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± 4 PLACES ± DIVISIONAL 3 PLACES SYMBOLS ± 2 PLACES ± 0 1 PLACE ± 0 PLACES ± 0.5 ° 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 13:36:19 9 0 ANGULAR TOL = TOLERANCES ARE NOT ACCUMULATIVE P.C. BOARD LAYOUT FOR CONNECTOR SIZE 8 FORMAT: master-tb-prod-C REVISION: J1 DATE: 2021/05/01 8 B 7 6 5 EC NO: 707240 DRWN: FAYEW CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: FAYEW APPR: KLANG THIRD ANGLE PROJECTION 4 2022/05/19 2022/05/31 2022/05/31 ASSEMBLY; VERTICAL MODULAR JACKS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2022/05/19 2022/05/31 DRAWING SERIES C-SIZE 42410 3 424108312 MATERIAL NUMBER PSD 000 CUSTOMER SEE CHART 2 N4 SHEET NUMBER GENERAL MARKET 3 OF 3 1 A