47309-2651

PRODUCT SPECIFICATION Micro SD/TFR Reader Header 1.0 SCOPE This specification covers the Micro SD/TFR Connector 47309-****, 105188-****, 47571-**** 47579-****, 105126-**** 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND NUMBER PRODUCT NAME MICRO SD/TFR HEADER 2.3H MICRO SD/TFR HEADER 2.45H MICRO SD/TFR HEADER PRODUCT NUMBER 47309-****/105188-****/105126-**** 47571-**** 47579-**** 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS See Sales Drawing (SD-47309-***/SD-105188-***/SD-47571-***/SD-47579-***/SD-105126-***) for information on dimensions, materials, plating and markings. 2.3 This connector assembly consists of 1 plastic housing, 8 pcs signal contacts, 2 pcs detect pins and 1 metal shell. Solder components shall meet Lead-free soldering requirements. 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS Please refer to the Sales Drawings SD-47309-***/SD-105188-***/SD-47571-***/SD-47579-***/SD-105126-*** and other sections of this Specification for specific references to applicable documents and specifications. In cases where the Product Specification differs from the Sales Drawings, the Sales Drawing will take precedence. 4.0 RATINGS REVISION: F 4.1 Rated Current (per contact) 0.5 Amp 30°C Max. ∆T over ambient. 4.2 Rated Voltage (per contact) 5 VDC (maximum) 4.3 Durability 10,000 mating/unmating cycles 4.4 Operating temperature range -40°C to +85°C 4.5 Storage temperature range -40°C to +100°C 4.6 Dielectric Withstanding Voltage 500 V DC ECR/ECN INFORMATION: TITLE: SHEET No. EC No: SH2013SH2013-0296 DATE: MICRO SD/TFR HEADER 1 of 5 2013 03/27 27 2013/0 DOCUMENT NUMBER: PS-47309-001 CREATED / REVISED BY: CHECKED BY: APPROVED BY: Dixon Li Nicolas Zhang Anson Yin TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 5.0 ELECTRICAL PERFORMANCE Test Ref. 5.1 Item Contact resistance 5.2 Insulation resistance 5.3 Dielectric withstanding voltage 5.4 Temperature Rise Test Condition Requirements Mate connectors: apply a maximum voltage of 20mV and a current of 10mA. Per EIA-364-23 Measurement shall be performed after 60 second from voltage application 500VDC between the contact Per EIA-364-21 500Vac(RMS) for 1 minute, 50Hz. Voltage application as above indicated. Per EIA-364-20 Mate card and measure the temperature rise of contact, when rated current is passed. Per EIA-364-70 method 1 40 milliohm Max. 100 million ohm Min. No voltage breakdown 30ºC Max. 6.0 MECHANICAL PERFORMANCE Test Ref. 6.1 6.2 REVISION: F Item Test Condition Requirements Durability Insertion and withdrawal are repeated 10,000 cycles with card at the speed rate of 400~600 cycles/hour. The specified measurement shall be performed the following cycles. Per EIA-364-09 Appearance: no damage Contact Resistance: ∆=10 milliohm Max Vibration Mate card and subjected to the following vibration conditions, for a period of 2 hours in each of 3 mutually perpendicular axes, with passing DC 1Ma during the test. Amplitude : 1.52mm P-P or 19.6m/s2{2G} Frequency : 10-55-10Hz shall be traversed in 1 minute. Per EIA-364-28 Appearance: no damage