473521001

9 7 8 6 5 4 3 2 1 SPRING E DETECT TERMINAL E SHELL CAM PIN HOUSING HEART CAM SIGNAL TERMINAL 14.00 4.95 0.75 0.90 0.95 1.00 Z 3.56 0.60 0.90 0.95 ℄ D D 0.30 1.29 15.20 14.20 10.26 1.35 C 1.45 0.20 0.40 C 0.30 1.10 1.30 ⏥ 0.10 1.30 5.76 B 7.70 Z (INCLUDE ALL TERMINALS AND SHELL PADS) 0.85 B 0.91 0.90 SECTION Z-Z 1.88 SYMBOLS = 0 = 0 A = 0 11.16 9 P1 RELEASE DATE 2018/08/17 8 07:38:33 C 7 6 5 4 8:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2017/10/06 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.15 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 602793 DRWN: TLI97 CHK'D: RZHANG APPR: RZHANG INITIAL REVISION: DRWN: AWANG17 APPR: AYIN THIRD ANGLE PROJECTION 3 2018/05/09 2018/08/17 2018/08/17 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/23 2016/05/17 SD-47352-101 MATERIAL NUMBER DRAWING SERIES A3-SIZE 47352 2 A TFR&MICRO SD CARD READER PUSH PUSH TYPE VSS DETECT SWITCH 473521001 PSD 001 K SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 2 9 7 8 5 6 4 3 2 1 14.00 CONNECTOR PROFILE 0.95 1.40 5.70 1.54 E 1.10 E 1.00 1.30 1.40 Vss SWITCH(NORMAL OPEN) 9.41 CARD TOUCH THE SIGNAL TERMINAL FIRSTLY THEN TOUCH THE DETECT TERMINAL D D 1.65 CARD WORKING POSITION PIN 7 PIN 6 PIN 5 1.90 CARD PRE-INSERTED Vss PIN 2 PIN 3 PIN 4 CLK DATA0 5.36REF CARD FULLY INSERTED 2.36REF 1.60REF PIN 8 0.80 TYP PIN 1 CD/DATA3 CMD VDD 1.50 TYP 0.20 1.10 C 0.40 0.56 15.20 12.50 11.50 14.20 11.50 C DATA2 DATA1 1.40 B B 2.50 RECOMMENDED PCB LAYOUT TOLERANCE FOR LAYOUT DIMENSIONS:±0.05 A NOTES: 1.MATERIAL: 1-1.SIGNAL TERMINAL,DETECT TERMINAL:COPPER ALLOY 1-2.SHELL,CAM PIN,SPRING:STAINLESS STEEL 1-3.HOUSING,CAM:LCP,UL94V-0,BLACK 2.FINISH: 2-1.SIGNAL TERMINAL:NICKEL(1.25 MICRONS MINIMUM)UNDERPLATED, GOLD(0.5 MICRONS MINIMUM)PLATING ON CONTACT AREA TIN(2.5 MICRONS MINIMUM)PLATING ON SOLDER TAIL 2-2.DETECT PIN:NICKEL(1.25 MICRONS MINIMUM)UNDERPLATED,GOLD(0.125 MICRONS MINIMUM)PLATING ON CONTACT AREA TIN(2.5 MICRONS MINIMUM)PLATING ON SOLDER TAIL 2-3.SHELL:GOLD FLASH(0.025 MICRONS MINIMUM)OVER NICKEL (1.25 MICRONS MINIMUM)UNDERPLATED ON SOLDER PAD 3.MECHANICAL SPECIFICATION: REPEATED 5000TIMES MATING AND UNMATING CYCLES AND STILL MEET ELECTRICAL CHARACTERISTICS 4.ELECTRICAL SPECIFICATION: 4-1.RATED CURRENT(PER CONTACT):0.5AMPS MAX AND TEMPERATURE RISE SHOULD BE 30°C MAX 4-2.INSULATION RESISTANCE(I.R):100 MEGOHMS MIN. 4-3.DIELECTRIC WITHSTANDING VOLTAGE:500 VAC 4-4.CONTACT RESISTANCE:100 MILLIOHMS MAX SYMBOLS = 0 = 0 = 0 9 P1 RELEASE DATE 2018/08/17 8 07:38:33 C 7 6 5 4 8:1 ± 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± = 0 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL = 0 DOCUMENT STATUS SCALE mm = 0 = 0 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2017/10/06 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE ± 0 PLACES ± 3.0 ° 0.15 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS EC NO: 602793 DRWN: TLI97 CHK'D: RZHANG APPR: RZHANG INITIAL REVISION: DRWN: AWANG17 APPR: AYIN THIRD ANGLE PROJECTION 3 2018/05/09 2018/08/17 2018/08/17 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2015/11/23 2016/05/17 SD-47352-101 MATERIAL NUMBER DRAWING SERIES A3-SIZE 47352 2 A TFR&MICRO SD CARD READER PUSH PUSH TYPE VSS DETECT SWITCH 473521001 PSD 001 K SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 2