5019400507

9 7 8 5 6 4 3 2 1 B 1.0 CIRCUIT N 7 (PICTH) �0.5� CAV NO. MOLD NO. CIRCUIT 1 NOTES �0.25� CIRCUIT No.1 INDICATOR MARK 材料及び仕上げ(めっき仕様)：TABLE 1 参照 　 MATERIAL AND FINISHES : SEE TABLE 1 2. 製品仕様書：PS-501940-001 　 PRODUCT SPECIFICATION: 3. 梱包形態：SEE SHEET 3 　 PACKAGING INFORMATION: 4 嵌合相手：501939 シリーズ 　MATES WITH:501939 SERIES 5. アプリケーション仕様書(コネクタ取扱い説明書)：5013300000-AS A00(JAPANESE)/A01(ENGLISH) 　 APPLICATION SPECIFICATION(CONNECTOR MANUAL): 6. ソルダーピン及びネイルの平坦度:0.1 MAX 　SOLDER PIN AND NAIL COPLANARITY: 0.1 MAX 　 7 偶数極に適用 　APPLY FOR EVEN CIRCUIT 8. 本製品は錫めっき品である。金めっき品は以下の図面を御参照下さい。 　 THIS PRODUCT IS A TIN PLATING. PLEASE REFER TO THE FOLLOWING DRAWING 　 FOR GOLD PLATING VERSION. 1 (COVER TAPE) 3.5 4.47 3.0 E (COVER TAPE) D C �0.08� D (COVER TAPE) A 0.12 E D 5.41 �0.05� (STAND OFF) 4 C 1 3 2 GOLD PLATING THICKNESS [micro-meter MIN] SERIES No 0.1 0.38 0.76 501940 **03 5019400001-SD PSD 000 203560 **03 2035600000-SD PSD 000 203561 **03 2035610000-SD PSD 000 DRAWING No C 0.6 �0.35� �1.22� 1 B 番号 NO 部品 PART 1 ウエハー WAFER �0.6� �1.05� �0.66� (SOLDERING AREA) 0.1 TABLE 1 1.1 (SOLDERING AREA) 材質 MATERIAL B ポリアミド(PA), UL94V-0, 色：SEE SHEET 5 POLYAMIDE(PA), UL94V-0, COLOR : SEE SHEET 5 リン青銅 PHOSPHOR BRONZE 錫めっき： 1.0 MICRO-METER MIN MATTE TIN PLATING 錫めっき： 1.0 MICRO-METER MIN MATTE TIN PLATING ニッケルめっき：1.0 MICRO-METER MIN NICKEL 接点部 ソルダーピン CONTACT AREA SOLDER PIN テール部 TAIL AREA 下地めっき UNDER PLATING 2 6.5 4.0 7.0 5.5 3.0 6.0 4.2 4.5 2.0 5.0 D ネイル NAIL 3 4 下地めっき UNDER PLATING カバーテープ ポリイミドテープ COVER TAPE POLYIMIDE TAPE DOCUMENT STATUS FORMAT: tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE ニッケルめっき：1.0 MICRO-METER MIN NICKEL 2020/05/14 8 極数 CIRCUIT SIZE A DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 錫めっき： 1.0 MICRO-METER MIN MATTE TIN PLATING テール部 TAIL AREA B C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION リン青銅 PHOSPHOR BRONZE A 5 4 3 5.2 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:49:39 7 6 5 4 EC NO: 635683 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: AISHIKAWA APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAWING 2020/04/10 2020/05/13 2020/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/13 2019/04/03 5019400000-SD MATERIAL NUMBER SERIES A3-SIZE 501940 3 PICO-CLASP 1.0 W/B SINGLE ROW VT SMT OUTER LOCK TIN PLATING 2 SEE SHEET 5 PSD 000 B SHEET NUMBER CUSTOMER GENERAL 1 OF 5 1 A 9 7 8 5 6 4 3 2 1 E E 4 �A� 嵌合相手 : 501939 シリーズ MATE WITH : 501939 SERIES �0.12� �4.55� �0.6� �1.0� 0.6 ±0.05 CIRCUIT N 製品輪郭線 PART OUTLINE �0.39� TYP.(N) CIRCUIT 1 �6.9� (PICTH) NON-ACCUMULATIVE D �6.3� 1.0 ±0.05 公差非累積 �7.3� D 1.53 MIN B ±0.05 DISTANCE FROM CONNECTOR OUT-LINE TO TERMINAL PAD 製品レイアウト PRODUCT LAYOUT パターン及び はんだ禁止エリア �0.4� TYP.(2) B 1.8 ±0.05 �0.21� LAYOUT OR SOLDER PASTE RESTRICTED AREA 4.2 ±0.05 C 2.65 ±0.05 C 嵌合図 MATED CONNECTORS B DISTANCE FROM CONNECTOR OUT-LINE TO NAIL PAD �0.8� 0.7 ±0.05 1.2 MIN TYP.(2) TYP.(2) 推奨基板レイアウト(全極数適用)：実装面側 (参考：基板厚 1.0mm, メタルマスク厚さ 0.12mm, マスク開口率100%) POLARIZED RECOMMENDED PCB LAYOUT(APPLY TO ALL CIRCUIT) : COMPONENT SIDE (REFERENCE: PCB THICKNESS 1.0mm, STENCIL THICKNESS 0.12mmm, APERTURE RATIO 100%) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION :パターン禁止エリア RESTRICTED AREA NO PCB COMPONENTS ALLOWED A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2020/05/14 8 DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:49:39 7 CURRENT REV DESC: 6 5 4 EC NO: 635683 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: AISHIKAWA APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAWING 2020/04/10 2020/05/13 2020/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/13 2019/04/03 5019400000-SD MATERIAL NUMBER SERIES A3-SIZE 501940 3 PICO-CLASP 1.0 W/B SINGLE ROW VT SMT OUTER LOCK TIN PLATING 2 SEE SHEET 5 PSD 000 B SHEET NUMBER CUSTOMER GENERAL 2 OF 5 1 A 9 7 8 E 5 6 5 REEL 引き出し方向 4 3 2 1 E NOTES 9. 梱包数量:1100個/リール 　　NUMBER OF CONNECTORS : 1100 PIECES/REEL 10. リードテープ長さ 　　LEAD TAPE LENGTH トップテープ接着部(空エンボス) 100 MIN ⌀ 380 ±2 �⌀80� PULL OUT DIRECTION TOP TAPE BONDED PART(EMPTY) 引き出し方向 PULL OUT DIRECTION D 部品挿入部 CONPONENT SUPPLIER 400 MIN D 末端部(空部) TAIL PART (EMPTY) 260 MIN Z 11. トップテープの剥離強度はIEC60286-3に準拠。 　 TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3. 12. 梱包仕様書：SPK-501940-001 　 PACKAGE SPECIFICATION: 13 発注番号：SHEET 5 参照 ORDER No.：PLEASE REFER TO SHEET 5 FOR PRODUCT LIST. 2.0 ±0.5 17.5 ±1.0 C (2) 0°) B 501940 ** * * (12 (22) (⌀10) C 極数 CIRCUIT SIZE 製品識別番号 ハウジングカラー IDENTIFICATION NUMBER HOUSING COLOR 0:NATURAL(BEIGE) 7:EMBOSSED PACKAGE B (⌀21) �⌀ 13� DETAIL Z THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A 番号 部品 NO. PART 5 材質 MATERIAL リール ポリスチレン(PS) REEL POLYSTYRENE(PS) DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2020/05/14 8 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:49:39 7 ANGULAR TOL 6 5 4 EC NO: 635683 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: AISHIKAWA APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAWING 2020/04/10 2020/05/13 2020/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/13 2019/04/03 5019400000-SD MATERIAL NUMBER SERIES A3-SIZE 501940 3 PICO-CLASP 1.0 W/B SINGLE ROW VT SMT OUTER LOCK TIN PLATING 2 SEE SHEET 5 PSD 000 B SHEET NUMBER CUSTOMER GENERAL 3 OF 5 1 A 3 12.0 ±0.1 16mm幅テープ TAPE WIDTH:16mm 7 TOP TAPE D �5.65� �2.55� Y 1 �5.65� E �5.8� 引き出し方向 PULL OUT DIRECTION E 2 �6.8� 4 0.5 ±0.05 5 6 CENTER OF CONNECTOR 7 8 �7.5� コネクター中心位置 9 SECTION X-X D X X C 16.0 ±0.3 �D� CONNECTOR C Y SECTION Y-Y 1.75 ±0.1 6 CARRIER TAPE ⌀ 1.5 +0.1 0.0 CIRCUIT 1 �2.0� エンボスポケット中心位置 B B CENTER OF EMBOSSED POCKET 累積ピッチ： 40 ±0.2 ACUUMLATIVE PITCH: 4.0 ±0.1 5 4 3 極数 CIRCUIT SIZE 8.3 7.3 6.3 D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A 番号 部品 PART NO. 6 7 材質 MATERIAL キャリアテープ ポリプロピレン(PP)、その他 CARRIER TAPE POLYPROPYLENE(PP), etc ポリエチレン(PE)、その他 POLYETHYLENE(PE), etc トップテープ TOP TAPE DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2020/05/14 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:49:39 7 6 5 4 EC NO: 635683 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: AISHIKAWA APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAWING 2020/04/10 2020/05/13 2020/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/13 2019/04/03 5019400000-SD MATERIAL NUMBER SERIES A3-SIZE 501940 3 PICO-CLASP 1.0 W/B SINGLE ROW VT SMT OUTER LOCK TIN PLATING 2 SEE SHEET 5 PSD 000 B SHEET NUMBER CUSTOMER GENERAL 4 OF 5 1 A 9 7 8 6 5 4 3 2 1 E E D D C C 13 製品一覧 PRODUCT LIST HOUSING COLOR B B NATURAL(BEIGE) 501940 0507 501940 0407 501940 0307 5 4 3 発注番号 ORDER No 極数 梱包形態：エンボスリール　 CIRCUIT SIZE PACKAGE:EMBOSSED REEL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 P1 RELEASE DATE 2020/05/14 8 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:49:39 7 6 5 4 EC NO: 635683 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: AISHIKAWA APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAWING 2020/04/10 2020/05/13 2020/05/14 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/03/13 2019/04/03 5019400000-SD MATERIAL NUMBER SERIES A3-SIZE 501940 3 PICO-CLASP 1.0 W/B SINGLE ROW VT SMT OUTER LOCK TIN PLATING 2 SEE SHEET 5 PSD 000 B SHEET NUMBER CUSTOMER GENERAL 5 OF 5 1 A