5024303230

10 9 7 8 F 5 6 4 3 2 1 F A±0.2 (B) D±0.8 0.4 (PITCH) 0.2 3 3±0.2 E (2.08) E (B) D (0.95) D 吸着テープ VACUUM TAPE ウェハー WAFER 1.54±0.2 0.27±0.1 0.27±0.1 2.4 19.5 17.5 15.5 13.5 11.5 9.5 7.9 6.7 6.3 5.9 5.5 4.3 D C ピン PIN C±0.2 補強金具 FITTING NAIL 0.02+0.1 -0.02 0.15±0.05 FITTING NAIL WIDTH C 0.8±0.2 10.0 7.0 トレードマーク TRADE MARK 4.0 0.46±0.1 3.4 B 0.14±0.05 PIN WIDTH 17.6 15.6 13.6 11.6 9.6 7.6 6.0 4.8 4.4 4.0 3.6 2.4 20.26 18.26 16.26 14.26 12.26 10.26 8.66 7.46 7.06 6.66 6.26 5.06 A B P1 RELEASE DATE 9 B CKT. CONNECTOR SERIES No. : 502430-**39 A DOCUMENT STATUS C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 90 80 70 60 50 40 32 26 24 22 20 14 502430-9030 502430-8030 502430-7030 502430-6030 502430-5030 502430-4030 502430-3230 502430-2630 502430-2430 502430-2230 502430-2030 502430-1430 EMBOSSED TAPE PACKAGE ORDER No. 2020/07/02 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:27:14 8 ANGULAR TOL 7 6 5 4 EC NO: 639809 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: RTAKEUCHI APPR: MSASAO THIRD ANGLE PROJECTION 2020/06/22 2020/07/02 2020/07/02 DRAWING 2007/12/26 2007/12/27 SERIES A3-SIZE 502430 3 0.4 B-TO-B CONN. HGT=1.0 W=2.6 PLUG ASSY WITH TAPE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-502430-003 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 E SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 注記 NOTES 1. 使用材料 MATERIAL ウェハー　：液晶ポリマー（LCP）　ガラス充填 UL94V-0（黒） WAFER:LIQUID CRYSTAL POLYMER(GLASS FILLED) UL94V-0 (COLOR:BLACK) ピン　：りん青銅 (t=0.08) PIN : PHOSPHOR BRONZE (t=0.08) 金具：りん青銅 (t=0.15) FITTING NAIL : PHOSPHOR BRONZE (t=0.15) 吸着テープ：ポリイミド VACUUM TAPE : POLYIMIDE 2. メッキ仕様 PLATING ピン PIN 金メッキ 0.1 マイクロメートル以上 GOLD 0.1MICROMETER MINIMUM 下地メッキ：ニッケルメッキ 1.0 マイクロメートル以上 UNDER PLATING : NICKEL 1.0 MICROMETER MINIMUM ※コンタクト部とテール部はニッケルメッキによって分断されている金メッキです。 DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. 金具 FITTING NAIL フラッシュ金メッキ FLASH Au PLATING 下地メッキ：ニッケルメッキ 1.0 マイクロメートル以上 UNDER PLATING : NICKEL 1.0 MICROMETER MINIMUM E 嵌合高さ MATING HEIGHT (1.0) 有効嵌合長 WIPE LENGTH (0.3) F 嵌合断面図（参考） MATED DRAWING (REFERENCE) D 0.95±0.03 B±0.03 1.05±0.05 0.66±0.05 7 0.27MIN. 0.44±0.05 0.3MIN. 7 0.66±0.05 C 0.35±0.03 E D （全極数／2）＝偶数の場合に適用。 APPLY FOR (CIRCUIT/2)=EVEN. 4. 嵌合相手：502426 シリーズ MATE WITH : 502426 SERIES. 5. テール平坦度は、0.08 以下 テール及び金具の平坦度は, 0.1 以下 TAIL COPLANARITY TO BE 0.08MAXIMUM. TAIL AND FITTING NAIL COPLANARITY TO BE 0.1MAXIMUM. C 6. ELV 及び RoHS適合品 ELV AND RoHS COMPLIANT. 7 斜線部はパターン書込み禁止範囲と半田禁止範囲を示す。 ただし、斜線部に同一配線を配置する場合はレジストを施し、この部分に半田は無きこと。 NO PATTERN CIRCUIT AND NO SOLDER ALLOWED IN THE SHADED AREA. HOWEVER, IF NEEDED TO ADD A TRACE OF THE SAME CIRCUIT, PUT THE SOLDER-RESIST, YET NO SOLDER ALLOWED IN THE AREA. 3 0.22±0.03 0.4±0.03 F P.C.BOARD PATTERN LAYOUT (REFERENCE) B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/07/02 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:27:14 8 ANGULAR TOL 7 6 5 4 EC NO: 639809 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: RTAKEUCHI APPR: MSASAO THIRD ANGLE PROJECTION 2020/06/22 2020/07/02 2020/07/02 DRAWING 2007/12/26 2007/12/27 SERIES A3-SIZE 502430 3 0.4 B-TO-B CONN. HGT=1.0 W=2.6 PLUG ASSY WITH TAPE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-502430-003 MATERIAL NUMBER CUSTOMER SEE SHEET 1 2 GENERAL PSD 001 E SHEET NUMBER 2 OF 2 1 A 10 9 8 7 5 6 4 3 2 1 注記 NOTES 1. 製品詳細寸法については製品単体図面を参照下さい。 DETAIL DIMENSION, SEE PRODUCT DRAWING. 2. 梱包数量: 3000 個／リール NUMBER OF CONNECTORS : 3000PCS/REEL 3. リードテープ長さ LEAD TAPE LENGTH F 20PCS. MIN. トップテープ接着部（空エンボス） TOP TAPE BONDED PART. (EMPTY) 引き出し方向 REEL F PULL OUT DIRECTION E 部品挿入部 COMPONENT SUPPLIER 引き出し方向 D E 4. 材料 MATERIAL ポリスチレン (POLYSTYRENE) キャリアテープ (CARRIER TAPE) (TOP TAPE) トップテープ PET , PE , PEF リール (REEL) ポリスチレン (PS) POLYSTYRENE (PS) ⌀330±2 (⌀80) PULL OUT DIRECTION 末端部 （空部） TAIL PART (EMPTY) B±1 D 5. ELV及びRoHS適合品。 ELV AND RoHS COMPLIANT. C±1 C C C B B 502430-**30 MODEL NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/07/02 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:27:15 8 ANGULAR TOL 7 6 5 4 EC NO: 639809 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: RTAKEUCHI APPR: MSASAO THIRD ANGLE PROJECTION 2020/06/22 2020/07/02 2020/07/02 DRAWING 2007/12/26 2007/12/27 SERIES A3-SIZE 502430 3 0.4 B-TO-B CONN. HGT=1.0 W=2.6 PLUG WITH TAPE EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-502430-004 MATERIAL NUMBER CUSTOMER SEE SHEET 2-4 2 GENERAL PSD 001 E SHEET NUMBER 1 OF 4 1 A 10 9 8 7 5 6 4 3 2 1 F F (1.66) 引き出し方向 PULL OUT DIRECTION 0.3±0.05 (1.46) E (4.5) (4.5) Y (1.66) (A) (7.5) 1.75±0.1 D 502430-**39 16±0.3 (A) トップテープ TOP TAPE (0.83) (1.01) E D SECTION X-X (2) ⌀1.5+0.1 0 8±0.1 Y X 4±0.1 X 累積ピッチ 40±0.2 ACCUMULATIVE PITCH 40±0.2 C C 16mm 幅キャリアテープ SECTION Y-Y 16mm WIDTH CARRIER TAPE 16 21.4 17.4 キャリアテープ幅 CARRIER TAPE WIDTH 7.58 7.18 6.78 6.38 5.18 C B (A) B 502430-2630 26 502430-2430 24 502430-2230 22 502430-2030 20 B 502430-1430 14 MATERIAL No. CKT. MODEL No. 502430-**30 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/07/02 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:27:15 8 ANGULAR TOL 7 6 5 4 EC NO: 639809 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: RTAKEUCHI APPR: MSASAO THIRD ANGLE PROJECTION 2020/06/22 2020/07/02 2020/07/02 DRAWING 2007/12/26 2007/12/27 SERIES A3-SIZE 502430 3 0.4 B-TO-B CONN. HGT=1.0 W=2.6 PLUG WITH TAPE EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-502430-004 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 E SHEET NUMBER 2 OF 4 1 A 10 9 8 7 5 6 4 3 2 1 F F (1.66) 引き出し方向 PULL OUT DIRECTION E (0.83) 502430-**39 トップテープ TOP TAPE Y E (4.5) (4.5) 0.3±0.05 (1.46) (A) (2) ⌀1.5+0.1 0 Y X 4±0.1 8±0.1 C 24mm 幅キャリアテープ SECTION Y-Y D SECTION X-X (11.5) 1.75±0.1 D 24±0.3 (A) (1.01) (1.66) X 累積ピッチ 40±0.2 ACCUMULATIVE PITCH 40±0.2 C 24mm WIDTH CARRIER TAPE 24 29.4 キャリアテープ幅 CARRIER TAPE WIDTH C B 14.38 12.38 25.4 10.38 8.78 B (A) 502430-6030 60 502430-5030 50 502430-4030 40 B 502430-3230 32 MATERIAL No. CKT. MODEL No. 502430-**30 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/07/02 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:27:15 8 ANGULAR TOL 7 6 5 4 EC NO: 639809 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: RTAKEUCHI APPR: MSASAO THIRD ANGLE PROJECTION 2020/06/22 2020/07/02 2020/07/02 DRAWING 2007/12/26 2007/12/27 SERIES A3-SIZE 502430 3 0.4 B-TO-B CONN. HGT=1.0 W=2.6 PLUG WITH TAPE EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-502430-004 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 E SHEET NUMBER 3 OF 4 1 A 10 9 8 7 5 6 4 3 2 1 F F (1.66) (0.83) E (4.5) 0.2+0.15 -0.05 トップテープ TOP TAPE 引き出し方向 PULL OUT DIRECTION Y 502430-**39 E (4.5) (14.2) (A) 32±0.3 (A) (1.01) (1.66) 1.75±0.1 D 0.3±0.05 (1.46) X (2) ⌀1.5+0.1 0 8±0.1 X Y 4±0.1 C 24mm 幅キャリアテープ SECTION Y-Y D SECTION X-X 累積ピッチ 40±0.2 ACCUMULATIVE PITCH 40±0.2 C 24mm WIDTH CARRIER TAPE 32 37.4 33.4 キャリアテープ幅 CARRIER TAPE WIDTH 20.38 18.38 16.38 C B (A) B 502430-9030 90 502430-8030 80 B 502430-7030 70 MATERIAL No. CKT. MODEL No. 502430-**30 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/07/02 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:27:15 8 ANGULAR TOL 7 6 5 4 EC NO: 639809 DRWN: SCV CHK'D: HSHIMOYAMA APPR: SHOSHIKAWA INITIAL REVISION: DRWN: RTAKEUCHI APPR: MSASAO THIRD ANGLE PROJECTION 2020/06/22 2020/07/02 2020/07/02 DRAWING 2007/12/26 2007/12/27 SERIES A3-SIZE 502430 3 0.4 B-TO-B CONN. HGT=1.0 W=2.6 PLUG WITH TAPE EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-502430-004 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 001 E SHEET NUMBER 4 OF 4 1 A