502443-0870

9 7 8 5 6 4 COVER TAPE 3 2 1 4.6 ±0.6 D ±0.6 1 E 6.85 (A) 0.85 (TERM.) E 2~5極カバーテープ形状 COVER TAPE FIGURE OF 2~5 CIRCUIT 10.9 ±0.25 A B 回路番号 1 CKT No. 1 D ±0.6 COVER TAPE D 嵌合図　MATED CONNECTOR (SCALE : 2-1) 7.5 ±0.6 (0.05) 6.85 3 6.0 6.0 2 （TERM.) PITCH 3 6.0 6.0 APPLY FOR CKT. SIZE /2 = EVEN. 4. 端子テール部 及び ネイルに錫めっきを使用しているため、 6.0 外観に摺動痕が付く場合が御座います。 6.0 THE WOUND OF FRICTION MIGHT ADHERE TO EXTERNALS 12.8 BECAUSE THE TIN PLATING IS USED FOR THE NAIL AND NAIL. 10.8 5. 本製品のプラスチック部に黒点等が確認される場合や 色合いが異なる場合がありますが、製品性能に影響はありません。 8.8 THERE IS NO INFLUENCE IN THE PRODUCT PERFORMANCE THOUGH 6.8 0.3 THE BLACK SPOT ETC. MIGHT BE CONFIRMED TO THE PLASTIC PART 7.45 3 2.05 0.05 OF THIS PRODUCT AND THE SHADE MIGHT BE DIFFERENT. 6. 梱包形状詳細については、5024431570PSD000を参照下さい。 RELEASED ニッケルめっき(下地)：1.0 micro-meter MIN. NICKEL (UNDER PLATING) 銅合金 COPPER ALLOY ネイル NAIL 錫めっき　： 1.0 micro-meter MIN. MATTE TIN PLATING EC NO: DRWN: CHK'D: APPR: 3 ニッケルめっき(下地)：1.0 micro-meter MIN. NICKEL (UNDER PLATING) RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 07.03.2017 8 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° ターミナル 錫めっき　： 1.0 micro-meter MIN. TERMINAL MATTE TIN PLATING(TAIL AREA) A 11:17:21 13 12 11 10 D 8 6 C 16 14 12 10 22 20 18 16 8 14 6 12 4 10 2 B C 502443-0960 9 502443-0860 8 7 502443-0760 502443-0660 6 5 502443-0560 4 502443-0460 502443-0360 3 B 8 502443-0260 2 A EMBOSSED　TAPE PACKAGE 極数 注文番号　ORDER NO. CKT.NO. MATERIAL NO. 502443-**08 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ハウジング ポリアミド　UL94V-0 色：ナチュラル HOUSING POLYAMIDE UL94V-0 COLOR:NATURAL 銅合金 COPPER ALLOY 2 20 18 16 14 12 10 PLEASE REFER TO 5024431570PSD000 FOR THE DETAILED FORM OF THE PACKAGE. 材質 MATERIAL 7 6 5 A REV 1 部品 PART (NAIL) 極数/2 = 偶数に適用 2016/09/20 2017/03/07 2017/03/07 番号 NO. 15 14 MATE WITH : 502439-**00 TAIL AND NAIL COPLANARITY TO BE 0.1 MAX. B 502443-1560 502443-1460 502443-1360 502443-1260 2. 端子テール部　及び　ネイルの平坦度: 0.1MAX C (NAIL) 1. 嵌合相手 : 502439-**00 2 1.0 113635 RWATANABE01 AIDA TKANEKO (TERM.) 0.85 (0.4) (0.3) 32 28 34 30 26 32 6.0 28 24 30 6.0 26 22 28 NOTES C D 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 4:1 DRWN BY DATE CHK'D BY DATE AIDA APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0 SINGLE ROW ST TYPE REC. ASSY WITH COVER TAPE 2016/09/20 RWATANABE01 2017/03/07 DATE 2017/03/07 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502443 SEE　TABLE DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024431508 2 PSD 000 1 1 OF 2 A 9 7 8 5 6 4 3 2 1 �A� (CONNECTOR) �2.2� PITCH E 5 ±0.1 �0.3� �0.6� D 1.45 ±0.1 1.8 ±0.1 D �0.45� �2.6� 3.6 ±0.1 �0.3� 1 MIN. �1.6� 1 2 ±0.05 3 �0.65� E 2.9 MIN. B ±0.1 基板パターンレイアウト(参考) RECCOMENDED P.C.B PATTERN LAYOUT (REF.) C C B B 2016/09/20 2017/03/07 2017/03/07 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) RELEASED RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 07.03.2017 8 11:17:21 7 6 5 A REV EC NO: DRWN: CHK'D: APPR: A 113635 RWATANABE01 AIDA TKANEKO ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 4:1 DRWN BY DATE CHK'D BY DATE AIDA APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0 SINGLE ROW ST TYPE REC. ASSY WITH COVER TAPE 2016/09/20 RWATANABE01 2017/03/07 DATE 2017/03/07 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502443 SEE　TABLE DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024431508 2 PSD 000 1 2 OF 2 A 9 7 8 5 6 4 3 2 1 1 E 6.85 (A) 0.85 (TERM.) E A 回路番号 1 CKT No. 1 10.9 ±0.25 B D （VACUME AREA) 3 (SCALE : 2-1) (TERM.) 0.85 (0.3) 2 （TERM.) PITCH 3 (0.4) 2 1 1. 嵌合相手 : 502439-**00 12 28 24 30 12 26 22 28 MATE WITH : 502439-**00 2. 端子テール部　及び　ネイルの平坦度: 0.1MAX 3 APPLY FOR CKT. SIZE /2 = EVEN. 7.45 THE WOUND OF FRICTION MIGHT ADHERE TO EXTERNALS BECAUSE THE TIN PLATING IS USED FOR THE NAIL AND NAIL. 5. 本製品のプラスチック部に黒点等が確認される場合や 色合いが異なる場合がありますが、製品性能に影響はありません。 THERE IS NO INFLUENCE IN THE PRODUCT PERFORMANCE THOUGH THE BLACK SPOT ETC. MIGHT BE CONFIRMED TO THE PLASTIC PART OF THIS PRODUCT AND THE SHADE MIGHT BE DIFFERENT. 0.05 2.05 0.3 (NAIL) 6. ELV 及び RoHS 適合品 ELV AND RoHS COMPLIANT PLEASE REFER TO 5024431570PSD000 FOR THE DETAILED FORM OF THE PACKAGE. 材質 MATERIAL 2017/07/28 2017/07/31 2017/07/31 銅合金 COPPER ALLOY ニッケルめっき(下地)：1.0 micro-meter MIN. NICKEL (UNDER PLATING) 銅合金 COPPER ALLOY ネイル NAIL 錫めっき　： 1.0 micro-meter MIN. MATTE TIN PLATING EC NO: DRWN: CHK'D: APPR: 3 ニッケルめっき(下地)：1.0 micro-meter MIN. NICKEL (UNDER PLATING) RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 31.07.2017 8 09:56:27 7 6 5 C REV A GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° ターミナル 錫めっき　： 1.0 micro-meter MIN. TERMINAL MATTE TIN PLATING(TAIL AREA) REVISED 2 D C B C 502443-0970 9 502443-0870 8 7 502443-0770 502443-0670 6 5 502443-0570 4 502443-0470 502443-0370 3 B 502443-0270 2 A EMBOSSED　TAPE PACKAGE 極数 注文番号　ORDER NO. CKT.NO. MATERIAL NO. 502443-**09 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ハウジング ポリアミド　UL94V-0 色：ナチュラル HOUSING POLYAMIDE UL94V-0 COLOR:NATURAL 120034 AISHIKAWA AIDA TKANEKO 1 部品 PART 13 12 11 10 12 20 16 22 12 18 14 20 10 16 12 18 8 14 10 16 6 12 8 14 4 10 6 12 2.9 8 4 10 3.7 6 2 8 7. 梱包形状詳細については、5024431570PSD000を参照下さい。 番号 NO. 15 14 極数/2 = 偶数に適用 4. 端子テール部 及び ネイルに錫めっきを使用しているため、 外観に摺動痕が付く場合が御座います。 B 502443-1570 502443-1470 502443-1370 502443-1270 TAIL AND NAIL COPLANARITY TO BE 0.1 MAX. C (NAIL) 16 32 28 34 12 30 26 32 NOTES Y C D 嵌合図　MATED CONNECTOR （VACUME AREA) (0.05) 6.85 D 2.15MIN Y 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 4:1 DRWN BY DATE 2016/04/19 AISHIKAWA 2016/04/28 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0MM PITCH W/B CONN. ST TYPE REC. ASSY 2-15CKT DATE CHK'D BY A DATE 2016/04/28 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502443 SEE　TABLE DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024431509 2 PSD 000 1 1 OF 2 9 7 8 6 5 4 3 2 1 5.25 吸着面 E E VACUME AREA �A� (CONNECTOR) �0.3� PITCH �0.3� �1.6� 1 MIN. 3 �0.65� 1 2 ±0.05 2.9 MIN. �2.2� B ±0.1 �0.6� (SCALE :10-1) 1.45 ±0.1 1.8 ±0.1 �0.45� �2.6� SECTION Y-Y 5 ±0.1 D 3.6 ±0.1 D 基板パターンレイアウト(参考) C C RECCOMENDED P.C.B PATTERN LAYOUT (REF.) B B 吸着面 VACUME AREA 2017/07/28 2017/07/31 2017/07/31 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) REVISED RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 31.07.2017 8 09:56:27 7 6 5 C REV EC NO: DRWN: CHK'D: APPR: A 120034 AISHIKAWA AIDA TKANEKO ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 4:1 DRWN BY DATE 2016/04/19 AISHIKAWA 2016/04/28 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0MM PITCH W/B CONN. ST TYPE REC. ASSY 2-15CKT DATE CHK'D BY A DATE 2016/04/28 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502443 SEE　TABLE DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024431509 2 PSD 000 1 2 OF 2 9 7 8 5 6 4 引き出し方向 REEL 引き出し方向 3 1 56mm幅テープ �16� PULL OUT DIRECTION TAPE WIDHT : 56mm PITCH 　 PULL OUT DIRECTION 2 E E 44mm幅テープ 　 TAPE WIDHT : 44mm (120 °) TAPE WIDHT : 32mm (22) (2 ) 　 TAPE WIDHT : 24mm TOP TAPE NOTE 1. 製品詳細寸法については、5024431509PSD000及び5024431508PSD000を参照下さい。 PLEASE REFER TO 5024431509PSD000 OR 5024431508PSD000 FOR THE DETAILED DIMENSION OF THE CONNECTOR. 2. 梱包数量：650個 / リール。 NUMBER OF CONNECTORS : 650 PIECES/REEL 3. リードテープ長さ トップテープ接着部(空エンボス) LEAD TAPE LENGTH CONNECTOR エンボステープ EMBOSSED TAPE (2) 1.75 ±0.1 C コネクタ コネクタ 中心位置 SENTER OF CONNECTOR �B� C ±1 E DETAIL E 20 PIECES MIN. エンボスポケット中心位置 CENTER OF EMBOSSED POCKET 4 ±0.1 累積ピッチ ： 40±0.2 ACCUMULATIVE PITCH TOP TAPE BONDED PART(EMPTY) = 4. 材料 MATERIAL キャリアテープ　：　ポリスチレン CARRIER TAPE : POLYSTYRENE トップテープ　：　ポリエステル、ポリエチレン、ポリエチレンテレフタレート TOP TAPE : POLYESTER , POLYETHELENE , POLYETHYLENE TEREPHTHALATE リール　：　ポリスチレン　＜リサイクル材を含む＞ REEL : POLYSTYRENE ＜RECYCLE MATERIAL CONTAINED＞ A RELEASE STATUS 9 P1 RELEASE DATE 07.03.2017 8 7 6 0 = 0 = 0 = 0 = = C 11:17:22 C 57.5 57.5 45.5 45.5 26.2 26.2 20.2 20.2 56 56 44 44 502443-15** 502443-14** 502443-13** 502443-12** 15 14 13 12 11 10 45.5 45.5 33.5 33.5 25.5 25.5 25.5 25.5 20.2 20.2 14.2 14.2 11.5 11.5 11.5 11.5 44 44 32 C B 502443-09** 502443-08** 502443-07** 502443-06** 502443-05** 502443-04** 502443-03** 502443-02** 製品番号 MATERIAL NO. 9 8 7 6 5 4 3 2 極数 CKT. NO. 32 24 24 24 24 エンボステープ幅A WIDTH OF TAPE B QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL 0 0 = 0 = 0 5 TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° B REV 100MIN. 2017/02/16 2017/03/07 2017/03/07 400MIN. TAIL PART (EMPTY) REVISED COMPONENT SUPPLIER 　 113635 AISHIKAWA AIDA TKANEKO 部品挿入部 末端部(空部) EC NO: DRWN: CHK'D: APPR: 引き出し方向 PULL OUT DIRECTION FORMAT: tb-prod-A3 REVISION: G DATE: 2015/12/14 D トップテープ (⌀21) B �0.5� 24mm幅テープ A ±0.3 D �7.5� 32mm幅テープ 　 ⌀ 380 ±2 (⌀10) 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 MM NTS DRWN BY DATE 2016/04/19 AISHIKAWA DATE CHK'D BY 2016/04/28 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0 SINGLE ROW ST TYPE EMBOSSED TAPE PACKAGE A DATE 2016/04/28 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502443 SEE TABLE DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024431570 3 CUSTOMER 2 PSD 1 OF 2 000 1 9 7 8 5 6 4 3 2 1 E E WITH COVER TAPE HSG COLOR：NATURAL 502443-1560 502443-1460 502443-1360 502443-1260 502443-**60 D コネクタ シリーズ CONNECTOR SERIES C 502443-0960 502443-0860 502443-0760 502443-0660 502443-0560 502443-0460 502443-0360 502443-0260 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C WITHOUT COVER TAPE HSG COLOR：NATURAL 502443-1570 502443-1470 502443-1370 502443-1270 502443-**70 B コネクタ シリーズ CONNECTOR SERIES D 極数 製品番号 MATERIAL NO. CKT. NO. 502443-0970 502443-0870 502443-0770 502443-0670 502443-0570 502443-0470 502443-0370 502443-0270 15 14 13 12 11 10 9 8 7 6 5 4 3 2 B 極数 製品番号 MATERIAL NO. CKT. NO. = 0 = 0 = = RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 07.03.2017 8 C 11:17:22 7 6 0 0 = 0 = 0 5 TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° B REV 0 REVISED = 113635 AISHIKAWA AIDA TKANEKO A 0 EC NO: DRWN: CHK'D: APPR: = 2017/02/16 2017/03/07 2017/03/07 QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 MM NTS DRWN BY DATE 2016/04/19 AISHIKAWA DATE CHK'D BY 2016/04/28 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0 SINGLE ROW ST TYPE EMBOSSED TAPE PACKAGE A DATE 2016/04/28 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502443 SEE TABLE DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024431570 3 CUSTOMER 2 PSD 2 OF 2 000 1