502494-0270

9 7 8 5 6 4 3 2 1 NOTES 1. 嵌合相手 : 502439-**00 MATE WITH : 502439-**00 2. 端子テール部　及び　ネイルの平坦度: 0.1MAX. TAIL AND NAIL COPLANARITY TO BE 0.1 MAX. 3 E 偶数極に適用。 APPLY FOR CKT. SIZE = EVEN. E 4. 端子テール部 及び ネイルに錫めっきを使用しているため、 外観に摺動痕が付く場合が御座います。 1 THE WOUND OF FRICTION MIGHT ADHERE TO EXTERNALS BECAUSE THE TIN PLATING IS USED FOR THE TAIL AND NAIL. 5. 本製品のプラスチック部に黒点等が確認される場合や 色合いが異なる場合がありますが、製品性能に影響はありません。 THERE IS NO INFLUENCE IN THE PRODUCT PERFORMANCE THOUGH THE BLACK SPOT ETC. MIGHT BE CONFIRMED TO THE PLASTIC PART OF THIS PRODUCT AND THE SHADE MIGHT BE DIFFERENT. 6. ELV 及び RoHS 適合品 A 回路番号　1 CKT No. 1 6.85 ELV AND RoHS COMPLIANT (A) D D 2 (TERM.) PITCH 3 2 1 B 7.45 （SCALE : 2-1 ) B 1.05 (TERM.) 2.05 材質 MATERIAL 2016/07/12 2016/07/12 2016/07/12 銅合金 COPPER ALLOY ニッケルめっき(下地)：1.0micro-meter MIN. NICKEL (UNDER PLATING) 銅合金 COPPER ALLOY ネイル NAIL 錫めっき　： 1.0 micro-meter MIN. TIN EC NO: DRWN: CHK'D: APPR: 3 ニッケルめっき(下地)：1.0micro-meter MIN. NICKEL (UNDER PLATING) RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 12.07.2016 8 06:58:54 7 6 5 B REV A GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° ターミナル 錫めっき　： 1.0 micro-meter MIN. TERMINAL TIN (TAIL AREA) REVISED 2 9.2 5.2 5.2 5.2 5.2 5.2 4 7.6 4.8 2.8 32 30 28 26 22 18 14 10 8 6 28 26 24 22 18 14 10 6 4 2 34 32 30 28 24 20 16 12 10 8 D C B A 502494-1570 502494-1470 502494-1370 502494-1270 502494-1070 502494-0870 502494-0670 502494-0470 502494-0370 502494-0270 15 14 13 12 10 8 6 4 3 2 B EMBOSSED　TAPE PACKAGE 極数 注文番号　ORDER NO. CKT.NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ハウジング 耐熱性樹脂　UL94V-0 色：ナチュラル HOUSING HEATPROOF RESIN UL94V-0 COLOR:NATURAL 106544 QHE31 SAKIYAMA TKANEKO 1 0.3 (NAIL) 部品 PART C 嵌合図　MATED CONNECTOR C 番号 NO. (TERM.) C 0.3 1.05 0.05 (TERM.) (NAIL) 10.9 ±0.25 6.85 3 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 4:1 DRWN BY DATE 2016/04/19 AISHIKAWA 2016/04/28 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0MM PITCH W/B CONN. RA TYPE REC. ASSY 2-15CKT DATE CHK'D BY A DATE 2016/04/28 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502494 SEE TABLE DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024941509 2 PSD 000 1 1 OF 2 9 7 8 6 5 4 3 2 1 E E (A) （CONNECTOR) 2.7 MIN. (0.3) PITCH D D 1 2 ±0.05 (1.6) �0.3� 1 MIN. 3 (2.2) (0.5) 5.4 B ±0.1 D 吸着エリア　6~15極 5 ±0.1 (2.4) 3.8 ±0.1 VACUME AREA 6~15CKT D 1.45 ±0.1 基板パターンレイアウト　(参考） RECCOMENDED P.C.B PATTERN LAYOUT (REF.) 1.8 ±0.1 C 2.7 C (1.3) (0.6) 吸着エリア　2~4極 VACUME AREA 2~4CKT B B 2016/07/12 2016/07/12 2016/07/12 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) REVISED RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 12.07.2016 8 06:58:54 7 6 5 B REV EC NO: DRWN: CHK'D: APPR: A 106544 QHE31 SAKIYAMA TKANEKO ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 4:1 DRWN BY DATE 2016/04/19 AISHIKAWA 2016/04/28 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE CLIK-MATE 2.0MM PITCH W/B CONN. RA TYPE REC. ASSY 2-15CKT DATE CHK'D BY A DATE 2016/04/28 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502494 SEE TABLE DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024941509 2 PSD 000 1 2 OF 2 9 7 8 5 6 3 引き出し方向 REEL 引き出し方向 4 1 56mm幅テープ �12� PULL OUT DIRECTION PULL OUT DIRECTION 2 TAPE WIDHT : 56mm PITCH E E 44mm幅テープ TAPE WIDHT : 44mm ±2 32mm幅テープ (120 °) (2) TAPE WIDHT : 32mm ⌀ 380 (⌀10) 24mm幅テープ (22) TAPE WIDHT : 24mm トップテープ (B) NOTE 1. 製品詳細寸法については、5024941509PSD000を参照下さい。 PLEASE REFER TO 5024941509PSD000 FOR THE DETAILED DIMENSION OF THE CONNECTOR. 2. 梱包数量：950個 / リール。 NUMBER OF CONNECTORS : 950 PIECES/REEL 3. リードテープ長さ LEAD TAPE LENGTH トップテープ接着部(空エンボス) CONNECTOR エンボステープ EMBOSSED TAPE �2� エンボスポケット中心位置 CENTER OF EMBOSSED POCKET 1.75 ±0.1 C コネクタ コネクタ 中心位置 SENTER OF CONNECTOR C ±1 E DETAIL E 20 PIECES MIN. 　 100MIN. TAIL PART (EMPTY) 9 P1 RELEASE DATE 2016/04/28 8 09:56:11 7 6 0 = 0 = 0 0 = 0 = 0 5 2016/04/19 2016/04/28 2016/04/28 = TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 104566 AISHIKAWA TKANEKO TKANEKO 0 A REV RELEASE STATUS FORMAT: tb-prod-A3 REVISION: G DATE: 2015/12/14 = = C 0 EC NO: DRWN: CHK'D: APPR: = 4. 材料 MATERIAL キャリアテープ　：　ポリスチレン CARRIER TAPE : POLYSTYRENE トップテープ　：　ポリエステル、ポリエチレン、ポリエチレンテレフタレート TOP TAPE : POLYESTER , POLYETHELENE , POLYETHYLENE TEREPHTHALATE リール　：　ポリスチレン　＜リサイクル材を含む＞ REEL : POLYSTYRENE ＜RECYCLE MATERIAL CONTAINED＞ 5. ELV 及び RoHS適合品 ELV AND RoHS COMPLIANT A �6.95� 57.5 57.5 45.5 45.5 45.5 45.5 33.5 25.5 25.5 25.5 26.2 26.2 20.2 20.2 20.2 20.2 14.2 11.5 11.5 11.5 C B 56 56 44 44 44 44 32 15 14 13 12 10 502494-1570 502494-1470 502494-1370 502494-1270 502494-1070 502494-0870 502494-0670 502494-0470 502494-0370 502494-0270 8 6 4 3 2 24 24 24 極数 製品番号 エンボステープ幅A WIDTH OF TAPE MATERIAL NO. CKT. NO. B QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS GENERAL REDRAWN AND REVISED 400MIN. 末端部(空部) CONPONENT SUPPLIER C ACCUMULATIVE PITCH 引き出し方向 PULL OUT DIRECTION 部品挿入部 �0.5� 4 ±0.1 累積ピッチ : 40±0.2 TOP TAPE BONDED PART(EMPTY) B D TOP TAPE (⌀21) A ±0.3 D 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 mm NTS DRWN BY DATE 2016/04/19 AISHIKAWA DATE CHK'D BY CLIK-MATE 2.0MM PITCH W/B CONN. EMBOSSED TAPE PACKAGE FOR 502494 KOMURAKAMI APPR BY TKANEKO DRAWING SIZE A DATE 2016/04/28 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 502494 SEE TABLE DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 5024941570 3 CUSTOMER 2 PSD 1 OF 1 000 1