5025850372

10 9 7 8 5 6 4 3 2 1 CIRCUIT N CIRCUIT 1 NOTES 1. 端子テール部及びネイルの平坦度：　0.1 MAX. F F TAIL AND NAIL COPLANARITY: 0.1 MAX. 2 極数/2 = 偶数　に適用 APPLY FOR CIRCUIT SIZE/2 = EVEN 3 適用製品及び各種仕様書はSHEET 4参照のこと PLEASE REFER TO SHEET 4 TABLE ABOUT APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 1 A E 3 2 (2.05) (0.3) D E TRADE MARK TAIL AND NAIL (0.05) (6.40) (B) (2.80) NAIL SOLDERING AREA NAIL SOLDERING AREA C CAV&MOLD NO D (1.40) TAIL SOLDERING AREA (0.4) NAIL 7.25 4 オーダー番号(製品番号):SHEET 5の製品一覧を参照のこと ORDER NO (PRODUCT NO) : REFER TO SHEET 5 FOR PRODUCT LIST 25 21 23.5 19.5 22 18 20.5 16.5 19 15 17.5 ±0.25 13.5 16 12 14.5 10.5 13 9 7.5 11.5 10 6 502585 ＊＊7＊ (1.50) TAIL (1.25) C 2 (0.25) TAIL PITCH 極数 CIRCUIT SIZE 部品 PART 材質 MATERIAL ① ハウジング HOUSING ポリアミド(PA)　UL94V-0 色：SEE CHART POLYAMIDE(PA) UL94V-0 COLOR : SEE CHART 0 銅合金 COPPER ALLOY ② ③ ターミナル TERMINAL ネイル NAIL DOCUMENT STATUS NATURAL (BEIGE) 1 ナチュラル (ベージュ) 黒 2 赤 RED 3 黄 YELLOW ニッケルめっき(下地)：1.0 micro-meter MIN NICKEL (UNDER PLATING) 4 青 BLUE 5 桃 PINK 黄銅 BRASS 6 緑 GREEN 錫めっき　： 1.0 micro-meter MIN MATTE TIN PLATING 7 錫めっき　： 1.0 micro-meter MIN MATTE TIN PLATING P1 COLOR NO 8 ニッケルめっき(下地)：1.0 micro-meter MIN NICKEL (UNDER PLATING) FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 色 COLOR シリーズ番号 SERIES NO 番号 NO. B A (0.75) RELEASE DATE 9 2020/05/28 9 BROWN 橙 ORANGE VIOLET 紫 C 7 6 5 B 極数 CIRCUIT NO A B C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:45 8 11.8 4.5 10.3 8.5 7 (±0.2) 3 8.8 (±0.2) 5.5 1.5 7.3 BLACK 茶 15 14 13 12 11 10 9 8 7 6 5 4 3 2 26.8 25.3 23.8 22.3 20.8 19.3 ±0.25 17.8 16.3 14.8 13.3 4 CLIK-MATE 1.5 SINGLE ROW SMT R/A TYPE REC ASSY TIN PLATING EC NO: 638332 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/05/26 2020/05/27 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/08 2020/03/03 DRAWING SERIES 5025850000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 502585 3 GENERAL 2 PSD 000 C SHEET NUMBER 1 OF 5 1 A 10 9 7 8 5 6 4 3 2 1 (A) (CONNECTOR) B (2.20) 0.75 1.50 (0.25) 5.15 ±0.10 3.80 ±0.10 CIRCUIT N CIRCUIT 1 E 2.00 4.00 6.60 パターン非推奨エリア E (1.45) 0.95 0.80 MIN (0.65) 2.00 F 2.90 MIN F 2.20 パターン非推奨エリア D パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECCOMENDED ON THE HATCHED AREA. PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHED AREA. (0.30) 1.70 ±0.10 CONNECTOR OUTLINE 1.80 ±0.10 基板パターンレイアウト(参考) RECCOMENDED PCB PATTERN LAYOUT (REF) (参考：メタルマスク厚さ 0.10mm, マスク開口率100%) D (REF:METAL STENCIL THICKNESS 0.10mm, APERTURE RATIO 100%) VACCUME AREA D D (2.30) (0.35) コネクタ外形 (1.25) 1.40 D VACCUME AREA 15 D D 14 VACCUME AREA 13 5.2 E MIN E MIN C E MIN CIRCUIT 1 E MIN E MIN 12 10 3.2 VACCUME AREA CIRCUIT 1 CIRCUIT 1 VACCUME AREA CIRCUIT 1 2.9 2極 3極 4-5極 6-11極 12-15極 2 CIRCUITS 3 CKTS 4-5 CKTS 6-11 CKTS 12-15 CKTS C 9 8 2.5 CIRCUIT 1 B 11 6 7 2.3 6 3.6 5 3.3 4 2.55 3 2.3 2 D 極数 CIRCUIT NO E B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ロック形状および吸着エリア LOCK SHAPE AND VACCUME AREA DOCUMENT STATUS P1 RELEASE DATE 9 2020/05/28 NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:45 8 SCALE mm 7 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 DIMENSION UNITS 6 5 4 CLIK-MATE 1.5 SINGLE ROW SMT R/A TYPE REC ASSY TIN PLATING EC NO: 638332 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/05/26 2020/05/27 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/08 2020/03/03 DRAWING SERIES 5025850000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 502585 3 GENERAL 2 PSD 000 C SHEET NUMBER 2 OF 5 1 A 9 7 8 5 6 3 2 1 1.50 +0.10 0 引き出し方向 ⑥REEL 引き出し方向 PULL OUT DIRECTION F 4 PULL OUT DIRECTION (1.70) 10 (R 0.75) 44mm幅テープ F TAPE WIDHT : 44mm 32mm幅テープ ⌀380±2 TAPE WIDHT : 32mm F (⌀10) (1 2 G ±0.10 E 24mm幅テープ TAPE WIDHT : 24mm E CKT 1 0° ) ⑤トップテープ (0.2) J ±1.00 CENTER OF CONNECTOR (H) E コネクタ 中心位置 (22) TOP TAPE コネクタ CONNECTOR ④エンボステープ EMBOSSED TAPE (⌀21) K ±1.00 D 1.75 DETAIL E ⌀ 1.50 +0.10 0 (12) ( 2) D エンボスポケット中心位置 (0.5) CENTER OF EMBOSSED POCKET (6.4) 4±0.1 累積ピッチ： 40±0.2 ACCUMULATIVE PITCH NOTES 5. 梱包数量　：　1,000個/リール NUMBER OF CONNECTORS: 1,000 PIECES/REEL 6. リードテープ長さ　 LEAD TAPE LENGTH トップテープ接着部(空エンボス) 20 PIECES MIN. C 49.4 45.4 20.2 40.4 15 14 13 12 11 10 9 8 7 6 5 4 3 2 44 ± 0.3 TOP TAPE BONDED PART(EMPTY) 引き出し方向 PULL OUT DIRECTION 部品挿入部 CONPONENT SUPPLIER 400MIN. 37.4 33.4 14.2 28.4 32 ± 0.3 29.4 25.4 11.5 - 24 -0.1 . 末端部(空部) TAIL PART (EMPTY) 100MIN. 7. トップテープの剥離強度はJIS C0806-3に準拠 +0.3 TOP TAPE PEELING FORCE IS DIFINED BY JIS C0806-3. B 8. 本製品は乾燥剤入り、ハイバリア梱包による納入である THIS PRODUCT IS DELIVERED IN A HIGH-BARRIER PACKAGE WITH DESICCANT 番号 部品 No. PART ④ A ⑤ ⑥ K 材質 MATERIAL DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 ポリスチレン　(リサイクル材を含む) POLYSTYLENE　(CONTAINED RECYCLED MATERIAL) P1 RELEASE DATE 9 2020/05/28 極数 エンボステープ幅F CIRCUIT NO WIDTH OF TAPE DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ポリエチレン、ポリエチレンテレフタレート POLYETHYLENE (PE), POLYETHYLENE TELEPHTHALATE(PET) リール REEL G B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ポリスチレン(PS) エンボステープ EMBOSSED TAPE POLYSTYLENE トップテープ TOP TAPE H J C 7 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:45 8 ANGULAR TOL 6 5 4 CLIK-MATE 1.5 SINGLE ROW SMT R/A TYPE REC ASSY TIN PLATING EC NO: 638332 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/05/26 2020/05/27 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/08 2020/03/03 DRAWING SERIES 5025850000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 502585 3 GENERAL 2 PSD 000 C SHEET NUMBER 3 OF 5 1 A 10 9 7 8 5 6 4 3 2 1 F F 3 適用製品及び各種仕様書 APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 梱包仕様書 PACKAGING SPECIFICATION E 適用嵌合相手 MATE WITH DOCUMENT NUMBER 502585 **7* SPK-502585-001 E TERMINAL (TIN PLATING) HOUSING シリーズ番号 SERIES NUMBER D PART NUMBER 502578 #24-28 #26-30 502579 0000 503429 0000 製品仕様書 PRODUCT SPECIFICATION 5025780000-PS アプリケーション仕様書 APPLICATION SPECIFICATION AS-502578-001 D 嵌合相手：502578シリーズ MATE WITH: 502578 SERIES C (9.65) C (1.25) (6.4) (A) B B 嵌合図 MATED CONNECTORS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/05/28 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:45 8 ANGULAR TOL 7 6 5 4 CLIK-MATE 1.5 SINGLE ROW SMT R/A TYPE REC ASSY TIN PLATING EC NO: 638332 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/05/26 2020/05/27 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/08 2020/03/03 DRAWING SERIES 5025850000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 502585 3 GENERAL 2 PSD 000 C SHEET NUMBER 4 OF 5 1 A 10 9 7 8 5 6 4 3 2 1 F F 4 製品一覧 PRODUCTS LIST 紫 VIOLET E D 橙 ORANGE 茶 BROWN 緑 GREEN 桃 PINK 黄 YELLOW 青 BLUE 黒 BLACK 赤 RED HOUSING COLOR ナチュラル(ベージュ) NATURAL(BEIGE) 502585 1579 502585 1578 502585 1577 502585 1576 502585 1575 502585 1574 502585 1573 502585 1572 502585 1571 502585 1570 15 502585 1479 502585 1478 502585 1477 502585 1476 502585 1475 502585 1474 502585 1473 502585 1472 502585 1471 502585 1470 14 502585 1379 502585 1378 502585 1377 502585 1376 502585 1375 502585 1374 502585 1373 502585 1372 502585 1371 502585 1370 13 502585 1279 502585 1278 502585 1277 502585 1276 502585 1275 502585 1274 502585 1273 502585 1272 502585 1271 502585 1270 12 502585 1179 502585 1178 502585 1177 502585 1176 502585 1175 502585 1174 502585 1173 502585 1172 502585 1171 502585 1170 11 502585 1079 502585 1078 502585 1077 502585 1076 502585 1075 502585 1074 502585 1073 502585 1072 502585 1071 502585 1070 10 502585 0979 502585 0978 502585 0977 502585 0976 502585 0975 502585 0974 502585 0973 502585 0972 502585 0971 502585 0970 9 502585 0879 502585 0878 502585 0877 502585 0876 502585 0875 502585 0874 502585 0873 502585 0872 502585 0871 502585 0870 8 502585 0779 502585 0778 502585 0777 502585 0776 502585 0775 502585 0774 502585 0773 502585 0772 502585 0771 502585 0770 7 502585 0679 502585 0678 502585 0677 502585 0676 502585 0675 502585 0674 502585 0673 502585 0672 502585 0671 502585 0670 6 502585 0579 502585 0578 502585 0577 502585 0576 502585 0575 502585 0574 502585 0573 502585 0572 502585 0571 502585 0570 5 502585 0479 502585 0478 502585 0477 502585 0476 502585 0475 502585 0474 502585 0473 502585 0472 502585 0471 502585 0470 4 502585 0379 502585 0378 502585 0377 502585 0376 502585 0375 502585 0374 502585 0373 502585 0372 502585 0371 502585 0370 3 502585 0279 502585 0278 502585 0277 502585 0276 502585 0275 502585 0274 502585 0273 502585 0272 502585 0271 502585 0270 2 D 極数 CIRCUIT NO オーダー番号 ORDER NO C E C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 9 2020/05/28 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:10:45 8 ANGULAR TOL 7 6 5 4 CLIK-MATE 1.5 SINGLE ROW SMT R/A TYPE REC ASSY TIN PLATING EC NO: 638332 DRWN: MIKEDA01 CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: MIKEDA01 APPR: KOMURAKAMI THIRD ANGLE PROJECTION 2020/05/26 2020/05/27 2020/05/28 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/08 2020/03/03 DRAWING SERIES 5025850000-SD MATERIAL NUMBER CUSTOMER A3-SIZE 502585 3 GENERAL 2 PSD 000 C SHEET NUMBER 5 OF 5 1 A