503398-1892

9 7 8 5 6 4 0 0.83 2 (PITCH) PIN No.1: DAT2 PIN No.2: CD/DAT3 2 PIN No.3: CMD PIN No.4: VDD 13.1 +0.4 -0.2 PIN No.6: Vss PIN No.7: DAT0 5.72 ±0.2 0.4 PIN No.8: DAT1 TYP.(8) 社名 COMPANY NAME 0.55 9 0.5 MIN. �0.48� (WITHOUT SEAL OF CARD) (テイル実装部) CARD CENTER D 2.4 3.85 9 CARD PUSH POSITION 8 1.43 TYP.(2) 11.75 TYP.(2) C キャビティー番号 CAVITY No. 0.45 7 2.73 TYP.(2) 13.35 14.05 ±0.3 0.42 0.46 6 2.95 9 4 2.6 906301 503398-1892 EMBOSSED PACKAGE 0.6 B 109011C 6.755 0.5 GENERAL TOLERANCES: (UNLESS SPECIFIED) UNDER 10 OVER 30 A OVER ANGLE RELEASE STATUS P1 RELEASE DATE 9 2020/04/02 UNDER DIMENSION UNITS SCALE mm 1:1 ± 0.25 ANGULAR TOL ± ± 0.3 ±3° 7 6 5 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:22:19 8 ± 0.2 30 B 極数 CIRCUITS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 一 10 8 オーダー番号 ORDER NO. CONNECTOR　SERIES　No.　503398-1821 10.72 1 : Year(2011) 09: Month(9) 01: Day(1) 1 : Line No. IDENTIFICATION MARK C : 503398-1892(ORDER NO.) FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 E 0.66 Molex 5 ロット番号 Lot No. オープン OPEN 1 3 CARD LOCK POSITION �1.9� �6.2� C CARD DASHING POSITION �2.8� 2 カード未挿入時 NO CARD This product is card ejection performance improvement type. 0.48 D クローズ CLOSE 5.肉抜き位置は任意とする。CAVITY IS TO BE OPTIONAL. 6.ロット印字は任意とする。 LOT NUMBERING IS TO BE OPTIONAL. 7 GND 推奨パターン GND RECOMMENDED PATTERN. 8.ELV 及びRoHS適合品 ELV AND RoHS COMPLIANT. カード裏挿し誤挿入時、カード突出エリア 9 （他の部品の設置、非推奨範囲） WHEN A CARD IS MISS-MATED IN THE REVERSE ORIENTATION, PART OF THE CARD PROTRUDES FROM THE SHELL DUE TO THE CARD-MISS MATING PREVENTION FEATURE. THEREFORE, NO COMPONENTS ARE ALLOWED TO BE PLACED IN THIS AREA. 10.本製品はカード排出性向上品です。 PIN No.5: CLK �11� カード挿入時 CARD INSERTING POSITION F 13.35 1.28 +0.12 -0.1 �7.7� E 1 1.ターミナル及びネイルの平坦度は0.1 MAX. (測定用定板面を基準） TERMINAL AND NAIL COPLANARITY TO BE 0.1 MAX.(FROM GAUGE PLANE) 2 スタンドオフ寸法 STAND OFF 3 パターン禁止エリア PATTERN PROHIBITION AREA 4.カード検知スイッチ DETECT SWITCH 8.93 ±0.2 1.1 ±0.2 2 NOTES: 11.16 +0.1 -0.02 F 3 12.95 10 4 MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE EC NO: 635207 DRWN: YSEKI01 CHK'D: MSASAO APPR: YNAITO INITIAL REVISION: DRWN: YGOTO APPR: YOITO THIRD ANGLE PROJECTION 2020/04/02 2020/04/02 2020/04/02 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011/12/13 2011/12/16 DRAWING SERIES A3-SIZE 503398 3 SD-503398-003 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 GENERAL MARKET A3 SHEET NUMBER 1 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 13.66 4.45 1.1 �0.28� (PITCH) 0.86 0.35 1.14 0.7 2.8 1.83 �0.5� F 3 2.4 3 3 3 7 3.01 2.145 1.595 DETECT LEVER MOUNT AREA (Vss : GROUND) 0.78 0.7 0.9 0.55 2.66 B 3 10 UNDER 10 OVER 30 OVER ANGLE DOCUMENT STATUS P1 RELEASE DATE 9 2020/04/02 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ± 0.2 30 UNDER DIMENSION UNITS SCALE mm 1:1 ± 0.25 ANGULAR TOL ± ± 0.3 ±3° 7 6 5 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:22:19 8 B 4.16 一 A 0.7 1.05 GENERAL TOLERANCES: (UNLESS SPECIFIED) RECOMMENDED PCB PATTERN LAYOUT (GENERAL TOLERANCE : ±0.05) C DETECT SWITCH MOUNT AREA 6.4 FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 D SHELL MOUNT AREA 5.1 0.93 3 パターン禁止エリア PATTERN PROHIBITION AREA 7.4 3.33 2.15 3 3.66 13.83 7.8 3 3 3 3.33 7.8 3 10.4 3 11.65 SHELL MOUNT AREA 3 13.25 TERMINAL MOUNT AREA 3 3 D 13.45 13.83 3 E 0.7 1.1 E C 7.7 3 2.8 0.35 F 4 MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE EC NO: 635207 DRWN: YSEKI01 CHK'D: MSASAO APPR: YNAITO INITIAL REVISION: DRWN: YGOTO APPR: YOITO THIRD ANGLE PROJECTION 2020/04/02 2020/04/02 2020/04/02 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011/12/13 2011/12/16 DRAWING SERIES SD-503398-003 MATERIAL NUMBER A3-SIZE 503398 3 PSD 001 CUSTOMER GENERAL MARKET 2 A3 SHEET NUMBER 2 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 F F E 材料 MATERIAL 仕上げ（めっき） FINISHES (PLATING) 番号 NO. 名称 NAME 1 ハウジング HOUSING 液晶ポリマー(LCP)、ガラス充填、UL94 V-0、黒 LIQUID CRYSTAL POLYMER (LCP), GLASS FILLED, UL94 V-0, BLACK ポリプラスチックス製VECTRA S475 VECTRA S475 MADE OF POLYPLASTICS カムスライダー CAM SLIDER 液晶ポリマー(LCP)、ガラス充填、UL94 V-0、黒 LIQUID CRYSTAL POLYMER (LCP), GLASS FILLED, UL94 V-0, BLACK ポリプラスチックス製 VECTRA E130i VECTRA E130i MADE OF POLYPLASTICS 2 3 ターミナル TERMINAL 4 シェル SHELL 5 スプリング SPRING 6 ピン PIN 7 ディテクト レバー DETECT LEVER 8 ディテクト スイッチ DETECT SWITCH D C 燐青銅 C52100(t=0.15) PHOSPOHR BRONZE C52100(t=0.15) 接触部：金めっき (0.5μm MIN.) テール部：錫めっき (2.0μm MIN.) 下地：ニッケルめっき (1.0μm MIN.) CONTACT AREA：GOLD PLATING (0.5 MICROMETER MINIMUM.) SOLDER TAIL AREA：TIN PLATING (2.0 MICROMETER MINIMUM.) UNDERPLATE：NICKEL OVERALL (1.0 MICROMETER MINIMUM.) ステンレス鋼 SUS301(t=0.1) STAINLESS STEEL SUS301(t=0.1) 基板実装部：金めっき (0.02μm MIN.) 下地：ニッケルめっき (0.5μm MIN.) NAIL AREA：GOLD PLATING (0.02 MICROMETER MINIMUM.) UNDERPLATE：NICKEL OVERALL (0.5 MICROMETER MINIMUM.) ピアノ線 SWP 全面：ニッケルめっき (3.0μm MIN.) NICKEL OVERALL (3.0 MICROMETER MINIMUM.) 燐青銅 C52100(t=0.15) PHOSPOHR BRONZE C52100(t=0.15) 接触部：金めっき (0.2μm MIN.) 基板実装部：金めっき 下地：ニッケルめっき CONTACT AREA：GOLD PLATING (0.2 MICROMETER MINIMUM.) NAIL AREA：GOLD PLATING UNDERPLATE：NICKEL OVERALL 燐青銅 C52100(t=0.15) PHOSPOHR BRONZE C52100(t=0.15) 接触部：金めっき (0.2μm MIN.) 基板実装部：金めっき 下地：ニッケルめっき CONTACT AREA：GOLD PLATING (0.2 MICROMETER MINIMUM.) NAIL AREA：GOLD PLATING UNDERPLATE：NICKEL OVERALL GENERAL TOLERANCES: (UNLESS SPECIFIED) 10 UNDER 10 OVER 30 A OVER ANGLE P1 RELEASE DATE 9 2020/04/02 UNDER DIMENSION UNITS SCALE mm 1:1 7 6 5 B ± 0.25 ANGULAR TOL ± ± 0.3 ±3° CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:22:19 8 ± 0.2 30 C THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 一 DOCUMENT STATUS D ステンレス鋼 SUS304 STAINLESS STEEL SUS304 B FORMAT: master-tb-prod-A3 REVISION: J DATE: 2020/01/14 E 4 MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE EC NO: 635207 DRWN: YSEKI01 CHK'D: MSASAO APPR: YNAITO INITIAL REVISION: DRWN: YGOTO APPR: YOITO THIRD ANGLE PROJECTION 2020/04/02 2020/04/02 2020/04/02 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2011/12/13 2011/12/16 DRAWING SERIES SD-503398-003 MATERIAL NUMBER A3-SIZE 503398 3 PSD 001 CUSTOMER GENERAL MARKET 2 A3 SHEET NUMBER 3 OF 3 1 A