5033980891

9 7 8 5 6 4 3 名称 番号 8.93 0 Pin No.2: CD/DAT3 1 液晶ポリマー(LCP)、ガラス充填、UL94V-0、黒 2 カムスライダー 液晶ポリマー、(LCP)、ガラス充填、UL94V-0、黒 HOUSING (7.7) CAM SLIDER LIQUID CRYSTAL POLYMER (LCP), GLASS FILLED, UL94 V-0, BLACK 3 ターミナル Pin No.5: CLK PITCH 4 シェル PHOSPOHR BRONZE CARD CENTER 0.4 SHELL (11) 5.72 (0.48) (WITHOUT SEAL OF CARD) D 5 スプリング 6 ピン 7 ディテクト 　レバー SPRING 8 2.4 9. 0.5MIN. 11.75 12.95 13.35 1.43 TYP.(2) 13.35 2.73 5. 0.42 809011 B TYP.(2) 8 : Year(2008) 09: Month(9) 01: Day(1) 1 : Line No. 0.55 0.38 0.65 0.22 8 TYP.(2) 9. 5 7 PHOSPOHR BRONZE CONTACT AREA：GOLD PLATING (0.2 MICROMETER MINIMUM.) NAIL AREA：GOLD PLATING UNDERPLATE：NICKEL OVERALL 接触部：金めっき (0.2μm MIN.) 基板実装部：金めっき 下地：ニッケルめっき D CONTACT AREA：GOLD PLATING (0.2 MICROMETER MINIMUM.) NAIL AREA：GOLD PLATING UNDERPLATE：NICKEL OVERALL スタンドオフ寸法 STAND OFF 3. パターン禁止エリア PATTERN PROHIBITION AREA 4. カード検知スイッチ DETECT SWITCH カード挿入時 CARD INSERTING POSITION 8. 6 燐青銅 (0.2μm MIN.) TERMINAL AND NAIL COPLANARITY TO BE 0.1 MAX.(FROM GAUGE PLANE) 7. Lot No. PHOSPOHR BRONZE 接触部：金めっき 基板実装部：金めっき 下地：ニッケルめっき NOTES 1. ターミナル及びネイルの平坦度は0.1MAX (測定用定板面を基準） 6. ロット番号 NICKEL OVERALL 2. 14.05±0.3 2.6 4 全面：ニッケルめっき 燐青銅 DETECT SWITCH 1 3.85 9. 809011 ピアノ線 STAINLESS STEEL ディテクト 　スイッチ 0.66 MXJ 9. CARD PUSH POSITION (1.9) CARD LOCK POSITION (2.8) 6.2 C CARD DASHING POSITION 3 0.48 NAIL AREA：GOLD PLATING UNDERPLATE：NICKEL OVERALL ステンレス鋼 　DETECT LEVER 2 STEEL SWP PIN TYP.(8) 社名 COMPANY NAME 0.55 CL Pin No.8: DAT1 (テイル実装部) 1.28+0.12 -0.1 Pin No.7: DAT0 E CONTACT AREA：GOLD PLATING (0.5 MICROMETER MINIMUM.) SOLDER TAIL AREA：TIN PLATING (2.0 MICROMETER MINIMUM.) UNDERPLATE：NICKEL OVERALL (1.0 MICROMETER MINIMUM.) ステンレス鋼 基板実装部：金めっき ステンレス鋼 下地：ニッケルめっき STAINLESS Pin No.6: V SS 13.1+0.4 -0.2 (0.5μm MIN.) 接触部：金めっき (2.0μm MIN.) テール部：錫めっき 下地：ニッケルめっき (1.0μm MIN.) 燐青銅 TERMINAL Pin No.4: V DD 1.1 2. LIQUID CRYSTAL POLYMER (LCP), GLASS FILLED, UL94 V-0, BLACK 2 Pin No.3: CMD FINISHES (PLATING) ハウジング Pin No.1: DAT2 E 1 仕上げ（めっき） MATERIAL NAME NO. 2 材料 NO CARD カード未挿入時 オープン 肉抜き位置は任意とする。CAVITY IS TO BE OPTIONAL. ロット印字は任意とする。LOT NUMBERING IS TO BE OPTIONAL. GND推奨パターン GND RECOMMENDED PATTERN. ELV AND RoHS COMPLIANT. ELV及びRoHS適合品 カード裏挿し誤挿入時、カード突出エリア （他の部品の設置、非推奨範囲） CLOSE C OPEN WHEN A CARD IS MISS-MATED IN THE REVERSE ORIENTATION,PART OF THE CARD PROTRUDES FROM THE SHELL DUE TOTHE CARD-MISS MATING PREVENTION FEATURE. THEREFORE, NO COMPONENTS ARE ALLOWED TO BE PLACED IN THIS AREA. キャビティー番号 CAVITY No. 503398-0891 0.6 8 EMBOSSED PACKAGE 0.5 10.72 6.455 クローズ B 極数 CIRCUITS ORDER NO. CONNECTOR　SERIES　No.　503398-0811 オーダー番号 2017/11/22 2017/12/05 2017/12/05 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 10.　GENERAL TOLERANCES 10UNDER ±0.2 　10OVER 30 UNDER ±0.25 　30OVER ±0.3 9 P1 RELEASE DATE 05.12.2017 8 168584 ESATO KTAKAHASHI NUKITA A 08:50:44 7 6 5 ± 0.2 4:1 DATE 3 PLACES ± 0.25 2 PLACES ± 0.3 ± ± 0 PLACES 2009/09/17 A DATE PRODUCT CUSTOMER DRAWING 0.1 0.2 NUKITA DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE DATE MTOMITA APPR BY 1 PLACE 2009/09/17 YMATSUMOTO CHK'D BY REV RELEASE STATUS SCALE MM DRWN BY 4 PLACES EC NO: DRWN: CHK'D: APPR: PERSPECTIVE VIEW FORMAT: master-tb-prod-A3 REVISION: G DATE: 2017/02/06 DIMENSION UNITS ANGULAR TOL ± 1.0 ° REVISED A GENERAL TOLERANCES (UNLESS SPECIFIED) 2009/09/17 THIRD ANGLE PROJECTION A3 MATERIAL NUMBER SERIES 503398 GENERAL MARKET DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER SD-503398-001 3 CUSTOMER 2 PSD 1 OF 2 001 1 9 7 8 6 5 4 3 2 1 13.66 4.45 1.14 0.7 PITCH 0.86 3. E 2.8 2.8 1.83 E (0.5) 0.35 (0.28) 0.35 7.7 1.1 0.7 1.1 3. 3. SHELL MOUNT AREA D 3. 3.66 7.4 3.01 3. 5.1 2.4 3. 3. 3. 3. 13.83 3. 3. 13.83 7.8 3. 3. 13.25 SHELL MOUNT AREA 3. 13.45 D 11.65 3. 10.4 7.8 TERMINAL MOUNT AREA 2.145 1.595 C 3.33 3. 3.33 2.15 C パターン禁止エリア 7. 0.7 DETECT LEVER MOUNT AREA (Vss : GROUND) 0.7 0.78 B 0.93 PATTERN PROHIBITION AREA 0.55 B 0.9 2.66 3. DETECT SWITCH MOUNT AREA 1.05 6.4 4.16 2017/11/22 2017/12/05 2017/12/05 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 　　RECOMMENDED PCB PATTERN LAYOUT 9 RELEASE DATE 05.12.2017 8 REVISED 168584 ESATO KTAKAHASHI NUKITA A 08:50:44 7 6 5 ± 0.2 1:1 DATE 3 PLACES ± 0.25 2 PLACES ± 0.3 ± ± 0 PLACES 2009/09/17 A DATE PRODUCT CUSTOMER DRAWING 0.1 0.2 NUKITA DRAWING SIZE DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE DATE MTOMITA APPR BY 1 PLACE 2009/09/17 YMATSUMOTO CHK'D BY REV P1 SCALE MM DRWN BY 4 PLACES EC NO: DRWN: CHK'D: APPR: A RELEASE STATUS DIMENSION UNITS ANGULAR TOL ± 1.0 ° (GENERAL TOLERANCE : ±0.05) FORMAT: master-tb-prod-A3 REVISION: G DATE: 2017/02/06 GENERAL TOLERANCES (UNLESS SPECIFIED) 2009/09/17 THIRD ANGLE PROJECTION A3 MATERIAL NUMBER SERIES 2 503398 GENERAL MARKET DOCUMENT NUMBER DOC TYPE DOC PART SHEET NUMBER SD-503398-001 3 CUSTOMER 2 PSD 2 OF 2 001 1