5033981892

9 7 8 5 6 4 NOTES: PIN No.1: DAT2 2 0.83 (PITCH) PIN No.2: CD/DAT3 2 PIN No.3: CMD PIN No.4: VDD 13.1 +0.4 -0.2 PIN No.6: Vss PIN No.7: DAT0 5.72 ±0.2 TYP.(8) 社名 COMPANY NAME �0.48� (WITHOUT SEAL OF CARD) 9 0.5 MIN. D 0.66 2.4 3.85 9 13.35 11.75 TYP.(2) 2.73 TYP.(2) 2.95 13.35 9 4 14.05 ±0.3 906301 C 1.43 Molex 2.6 CARD PUSH POSITION オープン OPEN 1 3 CARD LOCK POSITION �1.9� CARD DASHING POSITION �2.8� �6.2� カード未挿入時 NO CARD E This product is card ejection performance improvement type. 0.48 2 C 0.55 D 0.4 PIN No.8: DAT1 (テイル実装部) CARD CENTER クローズ CLOSE 5.肉抜き位置は任意とする。CAVITY IS TO BE OPTIONAL. 6.ロット印字は任意とする。 LOT NUMBERING IS TO BE OPTIONAL. 7 GND 推奨パターン GND RECOMMENDED PATTERN. 8.ELV 及びRoHS適合品 ELV AND RoHS COMPLIANT. カード裏挿し誤挿入時、カード突出エリア 9 （他の部品の設置、非推奨範囲） WHEN A CARD IS MISS-MATED IN THE REVERSE ORIENTATION, PART OF THE CARD PROTRUDES FROM THE SHELL DUE TO THE CARD-MISS MATING PREVENTION FEATURE. THEREFORE, NO COMPONENTS ARE ALLOWED TO BE PLACED IN THIS AREA. 10.本製品はカード排出性向上品です。 PIN No.5: CLK �11� 1 カード挿入時 CARD INSERTING POSITION 12.95 E �7.7� 2 1.ターミナル及びネイルの平坦度は0.1 MAX. (測定用定板面を基準） TERMINAL AND NAIL COPLANARITY TO BE 0.1 MAX.(FROM GAUGE PLANE) 2 スタンドオフ寸法 STAND OFF 3 パターン禁止エリア PATTERN PROHIBITION AREA 4.カード検知スイッチ DETECT SWITCH 8.93 ±0.2 0 1.28 +0.12 -0.1 11.16 +0.1 -0.02 1.1 ±0.2 3 B B 7 8 0.46 6 0.42 TYP.(2) キャビティー番号 CAVITY No. 0.45 5 ロット番号 Lot No. 503398-1892 EMBOSSED PACKAGE 0.6 109011C 6.755 GENERAL TOLERANCES: (UNLESS SPECIFIED) 一 10 UNDER 10 OVER 30 OVER THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ± 0.2 30 UNDER DOCUMENT STATUS 9 P1 RELEASE DATE 2018/09/28 8 10:32:15 7 6 5 ±3° 4 DIMENSION UNITS SCALE mm --- GENERAL TOLERANCES (UNLESS SPECIFIED) ± 0.25 ANGULAR TOL ± ± 0.3 ANGLE FORMAT: master-tb-prod-A3 REVISION: H DATE: 2017/10/06 極数 CIRCUITS オーダー番号 ORDER NO. CONNECTOR　SERIES　No.　503398-1821 10.72 1 : Year(2011) 09: Month(9) 01: Day(1) 1 : Line No. IDENTIFICATION MARK C : 503398-1892(ORDER NO.) A 0.5 8 1.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: DRAWING CORRECTION EC NO: 604656 DRWN: RMV02 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: YGOTO APPR: YOITO THIRD ANGLE PROJECTION 3 2018/09/11 2018/09/28 2018/09/28 2011/12/13 2011/12/16 DRAWING MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE PRODUCT CUSTOMER DRAWING SD-503398-003 MATERIAL NUMBER SERIES A3-SIZE 503398 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SEE CHART PSD 001 A2 SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 3 A 9 7 8 5 6 4 3 2 1 13.66 4.45 1.1 (PITCH) 1.14 E 0.86 0.35 �0.5� �0.28� 2.8 1.83 0.7 3 2.8 0.35 E 7.7 2.4 3 3 3 3 C 3.01 SHELL MOUNT AREA 5.1 2.145 C DETECT LEVER MOUNT AREA (Vss : GROUND) 0.78 0.7 0.93 3 3.33 1.595 B 7 1.1 7.4 3.33 2.15 3 3.66 13.83 7.8 10.4 3 11.65 3 13.25 3 3 パターン禁止エリア PATTERN PROHIBITION AREA D SHELL MOUNT AREA 3 13.45 3 13.83 3 D 0.7 TERMINAL MOUNT AREA 3 7.8 3 0.9 0.55 2.66 DETECT SWITCH MOUNT AREA 1.05 6.4 3 A 4.16 GENERAL TOLERANCES: (UNLESS SPECIFIED) 一 RECOMMENDED PCB PATTERN LAYOUT (GENERAL TOLERANCE : ±0.05) 10 UNDER 10 OVER 30 OVER THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ± 0.2 30 UNDER DOCUMENT STATUS 9 P1 RELEASE DATE 2018/09/28 8 10:32:15 7 6 5 ±3° 4 DIMENSION UNITS SCALE mm --- GENERAL TOLERANCES (UNLESS SPECIFIED) ± 0.25 ANGULAR TOL ± ± 0.3 ANGLE FORMAT: master-tb-prod-A3 REVISION: H DATE: 2017/10/06 B 0.7 1.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: DRAWING CORRECTION EC NO: 604656 DRWN: RMV02 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: YGOTO APPR: YOITO THIRD ANGLE PROJECTION 3 2018/09/11 2018/09/28 2018/09/28 2011/12/13 2011/12/16 DRAWING MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE PRODUCT CUSTOMER DRAWING SD-503398-003 MATERIAL NUMBER SERIES A3-SIZE 503398 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SEE CHART PSD 001 A2 SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 3 A 9 7 8 E C 4 3 材料 MATERIAL 名称 NAME 1 ハウジング HOUSING 液晶ポリマー(LCP)、ガラス充填、UL94 V-0、黒 LIQUID CRYSTAL POLYMER (LCP), GLASS FILLED, UL94 V-0, BLACK ポリプラスチックス製VECTRA S475 VECTRA S475 MADE OF POLYPLASTICS カムスライダー CAM SLIDER 液晶ポリマー(LCP)、ガラス充填、UL94 V-0、黒 LIQUID CRYSTAL POLYMER (LCP), GLASS FILLED, UL94 V-0, BLACK ポリプラスチックス製 VECTRA E130i VECTRA E130i MADE OF POLYPLASTICS 3 ターミナル TERMINAL 4 シェル SHELL 5 スプリング SPRING 6 ピン PIN 7 ディテクト レバー DETECT LEVER ステンレス鋼 SUS301(t=0.1) STAINLESS STEEL SUS301(t=0.1) 基板実装部：金めっき (0.02μm MIN.) 下地：ニッケルめっき (0.5μm MIN.) NAIL AREA：GOLD PLATING (0.02 MICROMETER MINIMUM.) UNDERPLATE：NICKEL OVERALL (0.5 MICROMETER MINIMUM.) ピアノ線 SWP 全面：ニッケルめっき (3.0μm MIN.) NICKEL OVERALL (3.0 MICROMETER MINIMUM.) 燐青銅 C52100(t=0.15) PHOSPOHR BRONZE C52100(t=0.15) 燐青銅 C52100(t=0.15) PHOSPOHR BRONZE C52100(t=0.15) 接触部：金めっき (0.2μm MIN.) 基板実装部：金めっき 下地：ニッケルめっき CONTACT AREA：GOLD PLATING (0.2 MICROMETER MINIMUM.) NAIL AREA：GOLD PLATING UNDERPLATE：NICKEL OVERALL ディテクト スイッチ DETECT SWITCH 10 UNDER 10 OVER 30 OVER ± 0.2 30 9 2018/09/28 8 10:32:15 7 6 5 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION UNDER ±3° 4 DIMENSION UNITS SCALE mm --- GENERAL TOLERANCES (UNLESS SPECIFIED) ± 0.25 ANGULAR TOL ± ± 0.3 ANGLE RELEASE DATE C 接触部：金めっき (0.2μm MIN.) 基板実装部：金めっき 下地：ニッケルめっき CONTACT AREA：GOLD PLATING (0.2 MICROMETER MINIMUM.) NAIL AREA：GOLD PLATING UNDERPLATE：NICKEL OVERALL A P1 D ステンレス鋼 SUS304 STAINLESS STEEL SUS304 一 DOCUMENT STATUS E 燐青銅 C52100(t=0.15) PHOSPOHR BRONZE C52100(t=0.15) GENERAL TOLERANCES: (UNLESS SPECIFIED) FORMAT: master-tb-prod-A3 REVISION: H DATE: 2017/10/06 1 接触部：金めっき (0.5μm MIN.) テール部：錫めっき (2.0μm MIN.) 下地：ニッケルめっき (1.0μm MIN.) CONTACT AREA：GOLD PLATING (0.5 MICROMETER MINIMUM.) SOLDER TAIL AREA：TIN PLATING (2.0 MICROMETER MINIMUM.) UNDERPLATE：NICKEL OVERALL (1.0 MICROMETER MINIMUM.) B 8 2 仕上げ（めっき） FINISHES (PLATING) 番号 NO. 2 D 5 6 1.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.25 2 PLACES ± 0.3 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: DRAWING CORRECTION EC NO: 604656 DRWN: RMV02 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: YGOTO APPR: YOITO THIRD ANGLE PROJECTION 3 2018/09/11 2018/09/28 2018/09/28 2011/12/13 2011/12/16 DRAWING MICRO SD CONN. PUSH/PUSH & NORMAL SUPER-SMALL TYPE PRODUCT CUSTOMER DRAWING SD-503398-003 MATERIAL NUMBER SERIES A3-SIZE 503398 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SEE CHART PSD 001 A2 SHEET NUMBER CUSTOMER GENERAL MARKET 1 3 OF 3 A