5034190710

10 9 7 8 4 3 2 1 �2.15� A F 5 6 X キャビティ番号 CAVITY NO. 奇数極端子 ODD TERMIANL （FPC挿入深さ） (INSERTION DEPTH OF FPC) �0.65� （接点位置） (CONTACT POSITION) 金型番号 MOLD NO. F �1.3� 偶数極端子 EVEN TERMIANL （接点位置） (CONTACT POSITION) ハウジング HOUSING 0.32 0.52 E （テール部長さ） (DIMENSION OF SOLDER TAIL) アクチュエータ ACTUATOR （テール部長さ） (DIMENSION OF SOLDER TAIL) SECTION Y-Y SECTION X-X E キャビティ番号 CAVITY NO. トレードマーク TRADE MARK �0.2� （接点間ピッチ） (PITCH OF CONTACTS) Y 注記 NOTES X 0.9 ±0.1 D 2.85 Y X �D� �0.05� 0.65 補強金具 FITTING NAIL �C� C �B� 0.4 0.1 ±0.03 ⌖ 0.15 X 0.15 ±0.03 (PITCH) 0 °� �13 1. 使用材料 MATERIALS ハウジング ：液晶ポリマー(LCP) ガラス充填、UL94V-0 、ナチュラル (白色系) アクチュエータ：ポリアミド (PA) ガラス充填、UL94 HB 、黒色 奇数端子 ：燐青銅、ニッケル下地、金メッキ 偶数端子 ：燐青銅、ニッケル下地、金メッキ 補強金具 ：燐青銅、ニッケル下地、金メッキ HOUSING : LIQUID CRYSTAL POLIMER(LCP), GLASS FILLED 　 UL94V-0, NATURAL(WHITE) ACTUATOR : POLYAMIDE(PA), GLASS FILLED 　 UL94 HB, BLACK ODD TERMINAL : PHOSPHOR BRONZE, GOLD OVER NICKEL PLATING C EVEN TERMINAL: PHOSPHOR BRONZE, GOLD OVER NICKEL PLATING FITTING NAIL : PHOSPHOR BRONZE, GOLD OVER NICKEL PLATING 2. 端子、補強金具のコプラナリティーは 0.1 以下とする COPLANALITY OF SOLDER TAILS AND FITTING NAILS: 0.1MAX. 3. 一般公差：± 0.3 GENERAL TOLERANCES: ±0.3 4. ELV 及び RoHS 適合品 ELV AND RoHS COMPLIANT 503419-0810 81 503419-0710 71 B 極　数 EMBOSSED PACKAGE C B A オーダー番号 ORDER NO. CIRCUITS CONNECTOR SERIES NO. 503419-***8 15.6 16.4 17.22 16.0 17.75 13.6 14.4 15.22 14.0 15.75 �1.69� B D E D THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION A ⌖ 0.15 X 0.1 ±0.03 アクチュエータ開放位置 POSITION OF ACTUATOR OPEN 0.2 0.4 E DOCUMENT STATUS 10 FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 9 2019/09/05 07:40:47 8 DIMENSION UNITS SCALE MM NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE (PITCH) ANGULAR TOL 7 6 5 INCH 4 PLACES ± ± 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 CURRENT REV DESC: OBSOLETED PART NO EC NO: 618848 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NKONDO APPR: KMORIKAWA THIRD ANGLE PROJECTION DRAWING 2018/07/06 2019/09/05 2019/09/05 2011/11/15 2011/11/16 SERIES A3-SIZE 503419 3 0.2 FPC CONN E/O BTM CONTACT TYPE HGT=0.9MM PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-503419-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL CUSTOMER SEE TABLE 2 E SHEET NUMBER 1 OF 2 1 A 9 7 8 5 6 4 3 2 1 0.2 ±0.03 仕上がり厚さ C A DOCUMENT STATUS 9 P1 RELEASE DATE 2019/09/05 8 0.85 ±0.05 1.81 ±0.05 0.05 ±0.025 D �0.1� �0.15� 0.22 ±0.05 0.4 ±0.05 (PITCH) 0.3 ±0.05 0.20 +0.03 -0.02 0.25 ±0.05 0.22 ±0.05 0.4 ±0.05 (PITCH) �0.15� 0.52 ±0.05 （補強板） (STIFFENER BOARD) 0.72 ±0.05 0.4 ±0.02 (PITCH) 3.5 ±0.5*1 1.7 ±0.05 R 0.15 ±0.05 TYP.(8) 0.03 MIN. 0.2X(N-3) ±0.05 0.2 ±0.05 R 0.15 ±0.05 TYP.(2) 1.15 ±0.05 0.25 ±0.15 0.85 ±0.15 0.95 ±0.15 0.2 ±0.02 0.3 ±0.05 0.61 ±0.05 0.2X(N-1) ±0.05 C 0.61 ±0.05 0.2X(N+1)+1.3 ±0.05 ・FPC について (ABOUT FPC) 抜き方向は、導体側から補強板側を推奨します 補強板材質はポリイミド、接着剤は熱硬化接着剤を推奨します なお、接着剤の接点部への付着は導通不良の原因となりますので 染み出しがないよう、お願いします RECOMMENDED PUNCHER DIRECTION: FROM CONDUCTOR SIDE TO STIFFENER BORAD SIDE RECOMMENDED MATERIAL: STIFFENER BOARD: POLYIMIDE BONDING AGENT: THERMOSETTING AGENT PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY ・FPC パターンのメッキ仕様は 金メッキ： 0.1µm 以上 下地ニッケルメッキ：2~6µm FPC PATTERN PLATING GOLD PLATING : 0.1µm MINIMUM NICKEL UNDER PLATING : 2~6µm *1 補強板長さが図面通り確保できない場合は、カバーレイと 補強板のオーバーラップ寸法を 以上としてください WHEN STIFFENER BOARD DIMENSION CAN NOT SECURE AS DRAWING, PLEASE GIVE THE OVERLAP SIZE OF COVER FILM AND STIFFENER BOARD AS 0.5mm MINIMUM FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 0.2 +0.03 -0.02 0.03 MIN. FPC構成推奨仕様 STRUCTURE OF FPC B 0.4 ±0.02 (PITCH) E 0.2 ±0.05 1.5 MIN. (OVERLAP) *1 0.5 MIN. 補強板：ポリイミド STIFFNER BOARD: POLYIMIDE 熱硬化接着剤 THERMOSETTING ADHESHIVE ベースフィルム：ポリイミド（25μm） BASE FILM: POLYIMIDE（25μm） 熱硬化接着剤 THERMOSETTING ADHESHIVE 導体部：銅箔（12μm） COPPER FOIL（12μm） 熱硬化接着剤 THERMOSETTING ADHESHIVE カバーレイ：ポリイミド（25μm） COVER FILM: POLYIMIDE（25μm） D 0.2X(N-1) ±0.02 0.2 ±0.05 2.35 ±0.30 E 0.2X(N+1) ±0.05 端子部メッキ PLATING THICKNESS 07:40:47 7 参考基板レイアウト RECOMMENDED PCB PATTERN DIMENSIONS(REF.) 適合するFPC推奨寸法（参考） APPLICABLE FPC PATTERN DIMENSIONS(REF.) （端子部仕上がり厚さ：0.2±0.03） (THICKNESS: 0.2±0.03) 推奨ペースト厚 : 100µm 推奨マスク開口率: 80% RECOMMEND SCREEN THICKNESS : 100µm RECOMMEND SCREEN OPEN RATIO : 80% B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL 6 5 4 INCH 4 PLACES ± ± 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: OBSOLETED PART NO EC NO: 618848 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NKONDO APPR: KMORIKAWA THIRD ANGLE PROJECTION 3 DRAWING 2018/07/06 2019/09/05 2019/09/05 2011/11/15 2011/11/16 PRODUCT CUSTOMER DRAWING A3-SIZE 503419 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-503419-001 MATERIAL NUMBER SERIES A 0.2 FPC CONN E/O BTM CONTACT TYPE HGT=0.9MM SEE TABLE PSD 001 E SHEET NUMBER CUSTOMER GENERAL CUSTOMER 1 2 OF 2 9 7 8 5 6 4 3 2 1 注記 NOTES E 1. 製品詳細寸法については図面 SD-503419-001 を参照下さい。 RE DETAILED DIMENSION. SEE SD-503419-001 2. 梱包数量： 5000個/リール NUMBER OF CONNECTORS : 5000 PCS/REEL 3. リードテープ長さ LEAD TAPE LENGTH REEL 引き出し方向 E PULL OUT DIRECTION 100MIN. 引き出し方向 トップテープ接着部（空エンボス） TOP TAPE BONDED PART. (EMPTY) (⌀80) D ⌀330±2 PULL OUT DIRECTION 4. C 材料 MATERIAL キャリアテープ (CARRIER TAPE) ポリスチレン (POLYSTYRENE) トップテープ(TOP TAPE) PET , PE , PEF リール (REEL) ポリスチレン (PS) POLYSTYRENE (PS) 5. トップテープの剥離強度については、IEC60286-3に準拠 TOP TAPE PEEL FORCE IS DEFINED BY IEC60286-3. "C" B±1.0 部品挿入部 COMPONENT SUPPLIER トップテープリーダー部 TOP TAPE LEADER PART 400MIN. D 末端部（空部） TAIL PART (EMPTY) 160MIN. 2±0.5 C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) A MM ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 9 P1 RELEASE DATE 2019/09/05 8 07:40:33 7 6 5 4 INCH 4 PLACES ± ± 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: EC NO: 618848 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NKONDO APPR: KMORIKAWA THIRD ANGLE PROJECTION 3 DRAWING 2018/06/26 2019/09/05 2019/09/05 2011/11/15 2011/11/16 PRODUCT CUSTOMER DRAWING A3-SIZE 503419 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-503419-002 MATERIAL NUMBER SERIES A 0.2 FPC CONN. E/O TAPING PACKAGE (503419-0**8 SERIES) SEE TABLE PSD 001 E SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 2 9 7 8 5 6 8±0.1 (PITCH) 3 2 1 (4) (3) 引き出し方向 PULL OUT DIRECTION E 4 Y (0.675) "T" E 32mm幅テープ 1.5+0.1 0 0.2±0.05 32mm WIDTH TAPE (3.6) (2.85) 24mm幅テープ DETAIL "T" D SECTION X-X (C) E (A) D (R0.75) CENTER OF POCKET エンボスポケット中心 24mm WIDTH TAPE C C (2) 1.75±0.1 (0.3) (1.7) B 累積ピッチ 40±0.2 ACCUMULATIVE PITCH : 40±0.2 Y X 4±0.1 ⌀1.5+0.1 0 X SECTION Y-Y B 32±0.3 28.4 14.2 33.4 18.2 503419-0810 81 24±0.3 11.5 25.4 16.2 503419-0710 71 E キャリアテープ幅 D EMBOSSED TAPE WIDTH C A B EMBOSSED TYPE PACKAGE オーダー番号 ORDER NO. 極　数 CIRCUITS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) A MM ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 9 P1 RELEASE DATE 2019/09/05 8 07:40:33 7 6 5 4 INCH 4 PLACES ± ± 1.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS CURRENT REV DESC: EC NO: 618848 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NKONDO APPR: KMORIKAWA THIRD ANGLE PROJECTION 3 DRAWING 2018/06/26 2019/09/05 2019/09/05 2011/11/15 2011/11/16 PRODUCT CUSTOMER DRAWING A3-SIZE 503419 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-503419-002 MATERIAL NUMBER SERIES A 0.2 FPC CONN. E/O TAPING PACKAGE (503419-0**8 SERIES) SEE TABLE PSD 001 E SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 2