5034256191

10 9 8 7 5 6 4 3 2 1 D±0.25 2.1 FPC挿入深さ (INSERTION DEPTH OF FPC) 2 (PICK UP AREA) F F (1.45) (0.75) 0.54 E 0.55 (EVEN TERMINAL) 0.1 0.45 (ODD TERMINAL) 4 B±0.25 断面図 A±0.25 D (B) (4.6) ACTUATOR CLOSE 1.2 C ACTUATOR OPEN (2) 0.3 (PITCH) 0.47 0.54 注記 NOTES: 1.材質 MATERIAL ハウジング：液晶ポリマー(LCP)、ナチュラル(白)、ガラス充填、UL94V-0 E HOUSING:LIQUID CRYSTAL POLYMER(LCP),NATURAL(WHITE) GLASS FILLED,UL94V-0 アクチュエータ：ポリフェニレンサルファイド(PPS)、黒色、ガラス充填、 UL94V-0 ACTUATOR:POLYPHENYLENE SULFIDE(PPS),BLACK GLASS FILLED,UL94V-0 ターミナル: リン青銅 (t=0.12) TERMINAL: PHOS-BRO (t=0.12) 金具：リン青銅(t=0.12) NAIL:PHOS-BRO(t=0.12) 2.めっき仕様 PLATING ターミナル D TERMINAL 接点部：金めっき　0.1µm以上 CONTACT AREA: GOLD 0.1 MICROMETER MINIMUM. 半田付け部：金めっき 　 SOLDER TAIL AREA: GOLD 下地めっき:ニッケル　1.0µm以上 UNDER PLATING:NICKEL 1.0 MICROMETER MINIMUM. 金具 NAIL 錫めっき　1.0µm以上 TIN PLATING 1.0 MICROMETER MINIMUM.　 下地めっき:ニッケル　1.0µm以上 C UNDER PLATING:NICKEL 1.0 MICROMETER MINIMUM. 3.平坦度は、0.1ミリ以下とする。 TAILS COPLANARITY TO BE 0.1 MAXIMUM. C±0.25 0.208 0.171 重さ (g) B 21.6 17.4 23.5 19.3 22.2 18.0 24.1 19.9 D C B A WEIGHT(g) 503425-7591 503425-6191 EMBOSSED PACKAGE オーダー番号 CONNECTOR SERIES No. 503425-**11 ORDER NO. 75 B 61 極　数 CIRCUITS THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 20:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/10/28 ± 1.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:02:38 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 601821 DRWN: MKP CHK'D: YNAITO APPR: RTAKEUCHI INITIAL REVISION: DRWN: KUSATO APPR: HHIRATA THIRD ANGLE PROJECTION DRAWING 2019/10/21 2019/10/28 2019/10/28 2008/11/14 2008/11/14 SERIES A3-SIZE 503425 3 0.3 FPC CONN. BACK FLIP HOUSING ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-503425-001 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 A SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 (0.24:METAL MASK) 0.6±0.05 (PITCH) 0.65±0.05 B±0.05 0.3+0.04 -0.03 0.3*(N-3)±0.03 0.75±0.07 E 0.75±0.07 0.3*N±0.05 N：極数 N:CIRCUITS D 適合する金めっきFPC推奨寸法 APPLICABLE FPC OF GOLD PATING RECOMMENDED DIMENSION COVER FILM: POLYIMIDE(25µm) カバーレイ：ポリイミド (25µm) 熱硬化接着剤 THERMOSETTING ADHESIVE THERMOSETTING ADHESIVE 導体部：銅箔 (35µm) COPPER FOIL (35µm) (仕上がり厚さ：0.2±0.03) (THICKNESS:0.2±0.03) 熱硬化接着剤 BASE FILM: POLYIMIDE(25µm) THERMOSETTING ADHESIVE 補強板：ポリイミド ISO VIEW （参考） 熱硬化接着剤 REINFORCE BOARD: POLYIMIDE RECOMMENDED P.W.B. PATTERN LAYOUT B 0.1MAX. 0.2±0.03 (METAL MASK THICKNESS:0.1) C 0.2±0.03 （補強板） (STIFFENER BOARD) 2.5±0.3 (3) 0.6±0.02 (PITCH) (メタルマスク厚さ：0.1) 推奨基板寸法 R0.15MAX. TYP.(4) 0.5MIN. PLATING: GOLD(0.1µmMIN.) NICKEL UNDER (1-5µm) 0.35±0.05 めっき：金めっき(0.1µm以上) 下地ニッケル (1-5µm) 0.3±0.05 (0.24:メタルマスク) ベースフィルム：ポリイミド (25µm) (0.60:METAL MASK) 0.65±0.05 (0.60:メタルマスク) D 2.1±0.15 (0.24:METAL MASK) 0.1MAX. F R0.3MAX. 1.75±0.1 仕上がり厚さ THICKNESS 0.3+0.04 -0.03 1.15±0.05 0.2±0.03 0.25±0.15 0.3±0.05 (0.24:メタルマスク) 1.05±0.1 0.95±0.1 0.6±0.05 (PITCH) 0.6±0.02 (PITCH) 0.3±0.02 0.45±0.07 2±0.15 0.3±0.05 2.9±0.05 E D±0.05 0.08±0.05 F 0.3*(N-1)±0.03 0.45±0.07 0.85±0.05 (0.70:METAL MASK) 0.75±0.05 (0.70:メタルマスク) 0.3*(N+2)±0.05 C FPCについて： 抜き方向は、導体側から補強板側を推奨致します。 補強フィルム材質は、ポリイミドを推奨致します。 接着剤は熱硬化接着剤を推奨します。 尚、接着剤の接点部への付着は導通不良の原因になりますので、 染み出しが無い様、お願い致します。　 ABOUT FPC: RECOMMENDED PUNCHER DIRECTION: FROM CONDUCTOR SIDE TO STIFFNER FILM SIDE. RECOMMENDED MATERIAL: STIFFENER FILM : POLYIMIDE BONDING AGENT : THERMOSETTING AGENT PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. FPC構成推奨仕様 STRUCTURE OF FPC B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/10/28 ± 1.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:02:38 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 601821 DRWN: MKP CHK'D: YNAITO APPR: RTAKEUCHI INITIAL REVISION: DRWN: KUSATO APPR: HHIRATA THIRD ANGLE PROJECTION DRAWING 2019/10/21 2019/10/28 2019/10/28 2008/11/14 2008/11/14 SERIES A3-SIZE 503425 3 0.3 FPC CONN. BACK FLIP HOUSING ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-503425-001 MATERIAL NUMBER PSD 001 CUSTOMER SEE SHEET 1 2 GENERAL MARKET A SHEET NUMBER 2 OF 2 1 A