503776-2410

9 7 8 5 6 4 3 2 1 注記　NOTES E 引き出し方向 1. 製品詳細寸法については製品単体図面を参照下さい。 RE DETAILED DIMENSION, SEE PRODUCT DRAWING. 2. 梱包数量： 3000個／リール REEL PULL OUT DIRECTION E NUMBER OF CONNECTORS : 3000 PCS/REEL. 3. リードテープ長さ LEAD TAPE LENGTH. D TOP TAPE BONDED PART. (EMPTY) 引き出し方向 PULL OUT DIRECTION ⌀ 330 ± 2 ( ⌀ 80) 20PCS MIN. トップテープ接着部(空エンボス) 400MIN. 末端部 (空部) TAIL PART (EMPTY) D 40MIN. 4. カバーテープの剥離強度については、IEC60286-3に準拠。 COVER TAPE PEEL FORCE IS DEFINED BY IEC60286-3. 5. 材料 MATERIAL B±1 キャリアテープ(CARRIER TAPE) : ポリスチレン(POLYSTYRENE) トップテープ(TOP TAPE) : PET, OTHER リール(REEL) : ポリスチレン(PS)＜リサイクル材を含む＞ 　　　　　　　　POLYSTYRENE(PS)＜RECYCLE MATERIAL CONTAINED＞ 6. ELV　及び RoHS適合品 ELV AND RoHS COMPLIANT C±1 "D" . 部品挿入部 COMPONENT SUPPLIER C C (⌀10) (120 °) (22) (2) B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 2016/09/21 2016/09/27 2016/09/27 (⌀21) (⌀13) ANGULAR TOL ± 3.0 ° 108729 JFURUKAWA TASAKAWA KMORIKAWA DETAIL "D" RELEASE STATUS 9 P1 RELEASE DATE 27.09.2016 8 A 05:11:50 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A FORMAT: tb-prod-A3 REVISION: G DATE: 2015/12/14 GENERAL TOLERANCES (UNLESS SPECIFIED) 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM NTS DRWN BY DATE JFURUKAWA 2016/09/21 2016/09/27 TASAKAWA APPR BY A DATE KMORIKAWA DRAWING SIZE 0.4 BB CONN. HGT=0.8 PLUG ASSY EMBSTP PKG DATE CHK'D BY 2016/09/27 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 503776 SEE CHART DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 5037760000 3 CUSTOMER 2 PSD 1 OF 3 000 1 9 7 8 5 6 4 3 2 1 E E 引き出し方向 PULL OUT DIRECTION (1.76) Y (4.62) (4.62) (0.78) (0.88) トップテープ TOP TAPE (1.51) SECTION Y-Y C (A) 1.75 ±0.1 0.3 ±0.05 D (7.5) (A) D 16 ±0.3 (1.76) (2) 8 ±0.1 ⌀ 1.55 +0.1 0 Y X SECTION X-X X 4 ±0.1 累積ピッチ40±0.2 ACCUMULATIVE PITCH 40±0.2 C 16mm幅キャリアテープ 16mm WIDTH CARRIER TAPE 16 21.4 17.4 6.39 5.59 4.79 3.59 キャリアテープ幅 CARRIER TAPE WIDTH C B (A) B 503776-2410 24 503776-2010 20 503776-1610 16 503776-1010 10 MATERIAL NO. CKT. MODEL NO. 503776-***0 B 2016/09/21 2016/09/27 2016/09/27 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 108729 JFURUKAWA TASAKAWA KMORIKAWA ANGULAR TOL ± 3.0 ° RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 27.09.2016 8 05:11:50 7 6 5 A REV EC NO: DRWN: CHK'D: APPR: A 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM NTS DRWN BY DATE JFURUKAWA 2016/09/21 2016/09/27 TASAKAWA APPR BY A DATE KMORIKAWA DRAWING SIZE 0.4 BB CONN. HGT=0.8 PLUG ASSY EMBSTP PKG DATE CHK'D BY 2016/09/27 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 503776 SEE CHART DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5037760000 2 PSD 000 1 2 OF 3 9 7 8 5 6 4 3 2 1 E E 引き出し方向 PULL OUT DIRECTION (1.76) (0.88) トップテープ TOP TAPE Y (4.62) (4.62) (1.51) SECTION Y-Y C (0.78) D SECTION X-X (2) 1.75 ±0.1 0.3 ±0.05 (A) D (11.5) (A) 24 ±0.3 (1.76) 8 ±0.1 X X Y 4 ±0.1 累積ピッチ40 ± 0.2 ACCUMULATIVE PITCH 40 ± 0.2 ⌀ 1.55 +0.1 0 C 24mm幅キャリアテープ 24mm WIDTH CARRIER TAPE 24 29.4 25.4 13.59 11.59 9.59 8.39 7.59 キャリアテープ幅 CARRIER TAPE WIDTH C B (A) B 503776-6010 60 503776-5010 50 B 503776-4010 40 503776-3410 34 503776-3010 30 MATERIAL NO. CKT. MODEL NO. 503776-***0 2016/09/21 2016/09/27 2016/09/27 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 108729 JFURUKAWA TASAKAWA KMORIKAWA ANGULAR TOL ± 3.0 ° RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 27.09.2016 8 05:11:50 7 6 5 A REV EC NO: DRWN: CHK'D: APPR: A 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM NTS DRWN BY DATE JFURUKAWA 2016/09/21 2016/09/27 TASAKAWA APPR BY A DATE KMORIKAWA DRAWING SIZE 0.4 BB CONN. HGT=0.8 PLUG ASSY EMBSTP PKG DATE CHK'D BY 2016/09/27 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 503776 SEE CHART DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5037760000 2 PSD 000 1 3 OF 3 9 7 8 5 6 4 3 2 1 注記 NOTES 1. 使用材料 MATERIAL A ±0.2 E Y 0.2 3 (1.64) ターミナル TERMINAL 金メッキ GOLD 下地メッキ：ニッケルメッキ UNDER PLATING : NICKEL ※コンタクト部とテール部はニッケルメッキによって分断されている金メッキです。 DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. 2.1 ±0.2 FLAT AREA E 2. メッキ仕様 PLATING (PITCH) 0.74 ±0.1 0.8 PICK-UP AREA B ±0.2 0.4 ハウジング:液晶ポリマー(LCP) UL94V-0(黒) HOUSING : LIQUID CRYSTAL POLYMER UL94V-0 (COLOR : BLACK) ターミナル：銅合金 TERMINAL : COPPER ALLOY 金具：銅合金 FITTING NAIL : COPPER ALLOY 金具 FITTING NAIL D TERMINAL WIDTH 0.63 ±0.1 ⌖ 0.15 Y 0.63 ±0.1 (B) 0.68 ±0.1 0.14 1.64 ±0.2 HOUSING 0.02 C D 錫メッキ Tin PLATING 下地メッキ：ニッケルメッキ UNDER PLATING : NICKEL 3. (全極数/2)=偶数の場合に適用。 APPLY FOR (CIRCUIT/2)=EVEN. 4. 嵌合相手：503772　シリーズ MATE WITH : 503772 SERIES. 5. テール及び金具の平坦度は、0.08以下。60極は0.1以下。 TAIL AND FITTING NAIL COPLANARITY TO BE 0.08 MAXIMUM. TAIL AND FITTING NAIL COPLANARITY WITH 60ckt TO BE 0.1 MAXIMUM. 6. ELV and RoHS COMPLIANT 0.10 FITTING NAIL WIDTH TERMINAL FITTING NAIL 0.2 0.2 TERMINAL LENGTH (1.7) B 11.6 9.6 7.6 6.4 5.6 4.4 3.6 2.8 1.6 13.47 11.47 9.47 8.27 7.47 6.27 5.47 4.67 3.47 B A C 503776-6010 60 503776-5010 50 503776-4010 40 503776-3410 34 503776-3010 30 503776-2410 24 503776-2010 20 B 503776-1610 16 503776-1010 10 EMBOSSED PACKAGE 極数 オーダー番号 ORDER No. CIRCUITS CONNECTOR SERIES No. : 503776 2016/09/21 2016/09/27 2016/09/27 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 108729 JFURUKAWA TASAKAWA KMORIKAWA ANGULAR TOL ± 3.0 ° RELEASE STATUS FORMAT: tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 27.09.2016 8 A 05:11:50 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 15:1 DRWN BY DATE JFURUKAWA 2016/09/21 2016/09/27 TASAKAWA APPR BY A DATE KMORIKAWA DRAWING SIZE 0.4 BB CONN. HGT=0.8 W=2.5 PLUG ASSY DATE CHK'D BY 2016/09/27 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 503776 SEE TABLE DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 5037761000 3 CUSTOMER 2 PSD 1 OF 2 000 1 7 8 0.63 ±0.03 E 5 6 3 2 1 0.63 ±0.03 B ±0.03 E 0.3 ±0.03 0.35 ±0.05 0.3 ±0.03 0.24 ±0.03 0.4 ±0.03 (PITCH) 1.7 ±0.05 0.42 ±0.05 0.54 ±0.05 4 0.5 MIN.*1 9 RECOMMENDED P.W. BOARD PATTERN LAYOUT C D 0.5 MIN.*1 0.3 MIN.*1 0.35 ±0.05 (0.7) 0.42 ±0.05 D C *1 パターン引き回し、および半田禁止エリア (当該箇所においては、これと接する回路以外の配線を禁止する。 また、接する回路を配線する場合はレジストを施し、この部分に 半田は無きこととする。) *1 PROHIBITED AREA OF PATTERN WIRING AND SOLDER. (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER CAN BE ATTACHED, THEN COVERED WITH A FILM TO KEEP SOLDER OUT.) B B 2016/09/21 2016/09/27 2016/09/27 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 108729 JFURUKAWA TASAKAWA KMORIKAWA ANGULAR TOL ± 3.0 ° RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 27.09.2016 8 05:11:50 7 6 5 A REV EC NO: DRWN: CHK'D: APPR: A 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM 20:1 DRWN BY DATE JFURUKAWA 2016/09/21 2016/09/27 TASAKAWA APPR BY A DATE KMORIKAWA DRAWING SIZE 0.4 BB CONN. HGT=0.8 W=2.5 PLUG ASSY DATE CHK'D BY 2016/09/27 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 503776 SEE TABLE DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5037761000 2 PSD 000 1 2 OF 2