5050665420

10 9 7 8 5 6 4 3 2 1 NOTES REEL (⌀80) PULL OUT DIRECTION E 1. RE DETAILED DIMENSION, SEE PRODUCT DRAWING. 2. NUMBER OF CONNECTORS : 8000 PCS/REEL. 3. LEAD TAPE LENGTH. F 20PCS. MIN. TOP TAPE BONDED PART. (EMPTY) ⌀380 ±2 F E PULL OUT DIRECTION "D" D TOP TAPE LEADER PART COMPONENT SUPPLIER 400MIN. B ±1 C ±1 C TAIL PART (EMPTY) 40MIN. 4. TOP TAPE PEEL FORCE IS DEFINED BY IEC60286-3 5. MATERIAL CARRER TAPE :POLYSTYRENE TOP TAPE :PET , OTHER REEL :POLYSTYRENE(PS)(RECYCLE MATERIAL CONTAINED) D C (⌀10) (120 °) (22) (2) B B (⌀21) MODEL NO. 505066-**22 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION (⌀13) A DOCUMENT STATUS 10 P1 RELEASE DATE 9 2019/02/27 1:5 ANGULAR TOL ± 1.0 ° 4 PLACES ± 0.01 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:28:30 8 SCALE mm GENERAL TOLERANCES (UNLESS SPECIFIED) DETAIL "D" FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 DIMENSION UNITS 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 612826 DRWN: GSHARMA CHK'D: MSASAO APPR: MSASAO INITIAL REVISION: DRWN: TNISHIDA02 APPR: TKUSUHARA01 THIRD ANGLE PROJECTION DRAWING 2019/02/22 2019/02/27 2019/02/27 2017/03/28 2017/04/03 SERIES 0.35 BB CONN. H=0.6 SSB6 RP REC ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5050660000 MATERIAL NUMBER CUSTOMER A3-SIZE 505066 3 GENERAL 2 PSD 008 C SHEET NUMBER 1 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 F F (5) PULL OUT DIRECTION (2.14) (1.07) TOP TAPE (0.78) 0.30 ±0.05 (1.35) (2) 8 ±0.1 ⌀ 1.5 +0.1 0 SECTION X-X D 1.75 ±0.1 16 ±0.3 E E (7.5) A (A) X X 4 ±0.1 ACCUMULATIVE PITCH 40±0.2 D 7.82 6.77 6.42 6.07 5.72 21.4 17.4 5.37 5.02 4.67 4.32 3.97 3.62 C 16 B キャリアテープ幅 CARRIER TAPE WIDTH C B 505066-3022 505066-2422 505066-2222 505066-2022 505066-1822 505066-1622 505066-1422 505066-1222 505066-1022 505066-0822 505066-0622 (A) MATERIAL No. ○ ○ ○ ○ --○ ○ ○ ○ ○ ○ ----------------------- HIGH VOL. TOOL LOW VOL. TOOL SAMPLE PREPARATION 30 24 22 20 18 16 14 12 10 8 6 C B CIRCUIT THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/02/27 ± 1.0 ° 4 PLACES ± 0.01 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:28:30 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 612826 DRWN: GSHARMA CHK'D: MSASAO APPR: MSASAO INITIAL REVISION: DRWN: TNISHIDA02 APPR: TKUSUHARA01 THIRD ANGLE PROJECTION DRAWING 2019/02/22 2019/02/27 2019/02/27 2017/03/28 2017/04/03 SERIES 0.35 BB CONN. H=0.6 SSB6 RP REC ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5050660000 MATERIAL NUMBER CUSTOMER A3-SIZE 505066 3 GENERAL 2 PSD 008 C SHEET NUMBER 2 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 F F PULL OUT DIRECTION (5) (2.14) (1.07) Y (0.78) E E (A) (11.5) A 24 ±0.3 TOP TAPE D 1.75 ±0.1 D 0.3 ±0.05 (1.35) ⌀ 1.5 +0.1 0 (2) 8 ±0.1 ACCUMULATIVE PITCH 40±0.2 Y 4 ±0.1 SECTION Y-Y C 24 B キャリアテープ幅 CARRIER TAPE WIDTH 13.77 13.07 12.02 11.32 10.99 29.4 25.4 10.62 9.92 9.57 8.52 8.17 C B (A) ----64 C ----60 ○ --54 ○ --50 ○ --48 ----46 ○ --42 ○ --40 ○ --34 B ----32 HIGH VOL TOOL LOW VOL TOOL MATERIAL No. CIRCUIT SAMPLE PREPARATION 505066-6422 505066-6022 505066-5422 505066-5022 505066-4822 505066-4622 505066-4222 505066-4022 505066-3422 505066-3222 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 2:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/02/27 ± 1.0 ° 4 PLACES ± 0.01 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:28:30 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 612826 DRWN: GSHARMA CHK'D: MSASAO APPR: MSASAO INITIAL REVISION: DRWN: TNISHIDA02 APPR: TKUSUHARA01 THIRD ANGLE PROJECTION DRAWING 2019/02/22 2019/02/27 2019/02/27 2017/03/28 2017/04/03 SERIES 0.35 BB CONN. H=0.6 SSB6 RP REC ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5050660000 MATERIAL NUMBER CUSTOMER A3-SIZE 505066 3 GENERAL 2 PSD 008 C SHEET NUMBER 3 OF 3 1 A 10 9 5 6 A F 0.175 E 1.16 ±0.1 CL 0.1 ±0.03 TERMINAL (TERMINAL WIDTH) FITTING NAIL ⌖ 0.15 X CL 0.58 ±0.05 0.68 ±0.1 3 0.22 ±0.05 (FITTING NAIL WIDTH) 0.225 ±0.03 0.965 ±0.05 NOTES A 1 (PICK-UP AREA) CL (B) 1.16 ±0.1 B 2 F HOUSING C 3 X 2 ±0.2 (PITCH) D 4 B 0.35 E 7 8 1 MATERIAL WAFER:LIQUID CRYSTAL POLYMER UL94V-0(COLOR :BLACK) TERMINAL:COPPER ALLOY FITTING NAIL : COPPER ALOY 2 PLATING TERMINAL : CONTACT AREA: SEPARATED GOLD PLATING (0.1 MICROMETER MINIMUM). SOLDER TAIL AREA: SEPARATED GOLD PLATING. UNDERPLATE: NICKEL OVERALL. *DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. FITTING NAIL : CONTACT AREA: SEPARATED GOLD PLATING (0.1 MICROMETER MINIMUM). SOLDER TAIL AREA: SEPARATED GOLD PLATING. UNDERPLATE: NICKEL OVERALL. *DIVIDE INTO PARTS THE GOLD PALATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. *EVEN THOUGH GOLD PLATING ON THE TOP SURFACE OF NAIL MIGHT BE THIN, NO FUNCTIONAL PROBLEM. APPLY FOR (CIRCUIT/2)=EVEN. 3 4 MATE WITH : 505070-**22/ 505070-**42 5 TAIL AND FITTING NAIL COPLANARITY TO BE 0.08MAXIMUM. 6 PROHIITED AREA OF PATTERN WIRING AND SOLDER. (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER CAN BE ATTACHED, THEN COVERED WITH A FILMTO KEEP SOLDER OUT). DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/02/27 14.70 13.65 12.95 12.60 11.90 11.20 10.85 10.50 9.80 9.45 9.10 8.40 8.05 7.70 6.65 6.30 5.95 5.60 5.25 4.90 4.55 4.20 3.85 3.50 505066-7022 505066-6422 505066-6022 505066-5822 505066-5422 505066-5022 505066-4822 505066-4622 505066-4222 505066-4022 505066-3822 505066-3422 505066-3222 505066-3022 505066-2422 505066-2222 505066-2022 505066-1822 505066-1622 505066-1422 505066-1222 505066-1022 505066-0822 505066-0622 B 70 64 60 58 54 50 48 46 42 40 38 34 32 30 24 22 20 18 16 14 12 10 ------------------------------------------------LOW VOL. TOOL ○ ○ ○ --○ ○ --○ --○ ○ ○ ○ --○ ○ ○ ○ ○ ○ HIGH VOL. TOOL D C 8 6 SAMPLE PREPARATION CIRCUIT ○ :TOOLED ORDER NO. △ :WORK IN PROCESS --- :TOOLING TO BE CONFIRMED CONNECTOR SERIES No. : 505066-**09 A B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 20:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 1.0 ° 4 PLACES ± 0.001 3 PLACES ± 0.003 2 PLACES ± 0.03 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 7 --------- EMBOSSED TAPE PACKAGE 05:28:33 8 11.90 10.85 10.15 9.80 9.10 8.40 8.05 7.70 7.00 6.65 6.30 5.60 5.25 4.90 3.85 3.50 3.15 2.80 2.45 2.10 1.75 1.40 1.05 0.70 6 5 4 CURRENT REV DESC: REVISED EC NO: 612826 DRWN: GSHARMA CHK'D: MSASAO APPR: MSASAO INITIAL REVISION: DRWN: TNISHIDA02 APPR: TKUSUHARA01 THIRD ANGLE PROJECTION DRAWING 2019/02/22 2019/02/27 2019/02/27 2017/03/28 2017/04/03 SERIES 0.35 BB CONN. H=0.6 SSB6 RP PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5050661000 MATERIAL NUMBER CUSTOMER A3-SIZE 505066 3 GENERAL 2 PSD 016 C SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 F (0.36) 1.54 ±0.03 D (0.36) RECOMMENDED METAL MASK LAYOUT (REFERENCE) (B+0.53) MIN. 0.4 ±0.03 E (0.34) CL (0.34) 1.5 ±0.03 6 D (0.36) (0.16) 0.35 ±0.05 (PITCH) 0.62 ±0.03 CL 0.58 ±0.03 0.385 ±0.03 0.35 ±0.03 (PITCH) 1.28 ±0.03 (B) 1.28 ±0.03 0.4 ±0.03 0.18 ±0.03 1.5 ±0.03 E B ±0.03 6 1.28 ±0.03 0.3 MAX. F RECOMMENDED THICKNESS OF METAL MASK : t=0.08mm RECEMMENDED OPEN APERTURE RATIO OF METAL MASK : 80% 6 RECOMMENDED P.W.BOARD PATTERN LAYOUT (REFERENCE) C C PROHIBITED AREA OF PATTERN WIRING AND SOLDER (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER CAN BE ATTACHED, THEN COVERED WITH A FILM TO KEEP SOLDER OUT) 0.6 ±0.1 6 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 20:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MATED CONDITION A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2019/02/27 ± 1.0 ° 4 PLACES ± 0.001 3 PLACES ± 0.003 2 PLACES ± 0.03 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 05:28:33 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 612826 DRWN: GSHARMA CHK'D: MSASAO APPR: MSASAO INITIAL REVISION: DRWN: TNISHIDA02 APPR: TKUSUHARA01 THIRD ANGLE PROJECTION DRAWING 2019/02/22 2019/02/27 2019/02/27 2017/03/28 2017/04/03 SERIES 0.35 BB CONN. H=0.6 SSB6 RP PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5050661000 MATERIAL NUMBER CUSTOMER A3-SIZE 505066 3 GENERAL 2 PSD 016 C SHEET NUMBER 2 OF 2 1 A