505153-8000.

Hand Crimp Tool for 2.00mm W/B Receptacle Terminals Modular Crimp Head Order No. 63827-6470 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-6400 FEATURES        A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles with simple contact positioning Easy handling due to outstanding force ratio A-620 Class 2 compliant and RoHS compliant Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100, accompanied by Air Powered Crimp Adapter (Order No. 63816-0700). Can also be used in the Battery Powered Tool Order No.63816-0200 (110 V) or 63816-0250 (220 V), accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600). SCOPE Products: 2.00mm W/B Receptacle Terminals, 22-24 AWG UL1061and 0.30mm2 AVSS wires. Insulation Diameter (2) Strip Length Terminal Order No. Wire Size Wire Type Reel (1) AWG mm² mm In. mm In. 22 N/A UL1061 1.15-1.40 .045-.055 1.30-1.80 .051-.071 505153 505153-8000 24 N/A UL1061 1.15-1.40 .045-.055 1.30-1.80 .051-.071 N/A 0.30 AVSS 1.40 Max .055 Max 1.30-1.80 .051-.071 1. Follow the Cut-Off Tab specifications on Applicator specification sheets 2. Note: UL1061 is recommended to achieve optimum IPC-A620 for 22 and 24 AWG compliant crimps. Terminal Series No. DEFINITION OF TERMS BEND UP ROLLING STRIP LENGTH CONDUCTOR BRUSH BELL MOUTH SEAM TWISTING BEND DOWN CUT-OFF TAB CONDUCTOR CRIMP HEIGHT Doc No: ATS-6382764HM Revision: B Release Date: 10-14-14 Revision Date: 11-11-15 WIRE INSULATION CRIMP UNCONTROLLED COPY Page 1 of 6 Hand Crimp Tool for 2.00mm W/B Receptacle Terminals ▲Insulation Crimp Note: Due to the terminal’s insulation grip design and/or insulation diameter range, this tool uses “overlap” form geometry in the insulation punch. This produces an overlap insulation crimp (A620 – compliant). While the insulation punch profile may appear “lopsided”, this is a normal condition for this tool. See figure to the right. (Some tools with multiple crimp pockets may not have the “overlap” profile on all pockets). OVERLAP FORM GEOMETRY PUNCH OVERLAP INSULATION CRIMP CRIMP SPECIFICATION WIRE ANVIL After crimping, the crimp profiles should measure the following (see notes on page 4). Conductor Crimp Insulation Crimp Pull Force Profile Height (Ref) Width (Ref) Height (Ref) Width (Ref) Minimum AWG mm2 mm In. mm In. mm In. mm In. N Lb. A B C D 22 N/A 0.65-0.70 .025-.027 1.20 .047 1.60 .063 1.50 .059 39.2 8.81 X 24 N/A 0.59-0.64 .023-.025 1.20 .047 1.50 .059 1.50 .059 29.3 6.59 X 505153-8000 26 N/A Not recommended for use with 505153 terminal N/A 0.30 0.69-.74 .027-.029 1.20 .047 1.55 .061 1.50 .059 50.0 11.24 X To Achieve IPC-A-620 Class 3 Crimps, the following over-all wire insulation diameter ranges are recommended: Profile A: Not recommended. Profile B: 1.22-1.30mm (.048-.051”) (UL1061). Profile C: 1.37-1.40mm (.053-.055”) (AVSS). Profile D: 1.12-1.20mm (.044-.047”) (UL1061). Terminal Order No. Wire Size Tool Qualification Notes: 1. Pull Force should be measured with no influence from the insulation crimp. 2. The above specifications are guidelines to an optimum crimp. HAND TOOL OPEN OPERATION Open the tool by squeezing the handles together, at the end of the closing stroke, the ratchet mechanism will release the handles, and the hand tool will spring open. SWING LOCATOR OPEN WIRE STOP BLADE TERMINAL SEATED IN LOCATOR Figure 1 1. With the hand tool in the open position, pivot the terminal locator open by pulling up on the locator knob and lift the wire stop blade up. See Figure 1. 2. Insert the terminal into the correct profile until the terminal is fully seated and stops. Make sure the wire stop blade is fully seated on the terminal behind the conductor grip section. 3. Gently pivot the locator closed. 4. Bring down the wire stop blade. Doc No: ATS-6382764HM Revision: B Release Date: 10-14-14 Revision Date: 11-11-15 UNCONTROLLED COPY Page 2 of 6 Hand Crimp Tool for 2.00mm W/B Receptacle Terminals 5. Slide the pre-stripped wire into the terminal; make sure to aim the wire brush towards the tip point on the wire stop blade. See Figure 2. Align the wire so that it is parallel and sitting into the terminal. Maintain a light and constant pressure on the wire that is seated in the terminal at all times. (Do not let go of the wire.) Be sure to hold the wire and terminal in place until the terminal is fully crimped. See Figure 3. 6. Close the tool until the ratchet releases. 7. Lift the wire stop blade up. 8. Carefully remove the crimped terminal. Note: To maintain good brush control and a consistent bell mouth the crimping instructions must be followed. WIRE STOP BLADE TERMINAL WIRE STOP BLADE CONDUCTOR PUNCH CONDUCTOR PUNCH INSULATION PUNCH LOCATOR WIRE Figure 3 WIRE TERMINAL Figure 2 CONDUCTOR ANVIL INSULATION ANVIL Note: The tamper proof ratchet action will not release the tool until it has been fully closed. Note: To maintain good brush control and a consistent bell mouth the crimping instructions must be followed. Terminal Locator Replacement/Change Over This section describes the procedure for changing locators. Removal 1. With the tool in the open position, pivot the terminal locator outward. 2. Remove the M4 BHCS. See Figure 4. Installation 1. Place the proper locator, (See Chart on page 2), on the hand tool. Install the M4 BHCS PIVOT M4 BHCS. See Figure 4. LOCATOR Figure 4 2. Tighten the screw enough to hold the locator. Make sure the locator can still float freely with hand pressure. 3. Insert the proper terminal fully into the correct profile slot until the terminal is fully seated and stops. Then gently pivot the locator closed. 4. With hand pressure, slowly slide the locator to the correct position. See Figure 5. 5. Gently pivot the locator open without disturbing the location. 6. Hold the locator firmly in place and slowly tighten the M4 BHCS. Doc No: ATS-6382764HM Revision: B Release Date: 10-14-14 Revision Date: 11-11-15 UNCONTROLLED COPY Page 3 of 6 Hand Crimp Tool for 2.00mm W/B Receptacle Terminals Maintenance It is recommended that each operator of the tool be made aware of, and responsible for, the following maintenance steps: 1. Remove dust, moisture, and other contaminants with a clean brush, or soft, lint free cloth. 2. Do not use any abrasive materials that could damage the tool. INCORRECT INCORRECT CORRECT 3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high quality machine oil. Do not oil Figure 5 excessively. The tool was engineered for durability but like any other equipment it needs cleaning and lubrication for a maximum service life of trouble free crimping. Light oil (such as 30 weight automotive oil) used at the oil points, every 5,000 crimps or 3 months, will significantly enhance the tool life. 4. Wipe excess oil from hand tool, particularly from crimping area. Oil transferred from the crimping area onto certain terminations may affect the electrical characteristics of an application. 5. When tool is not in use, keep the handles closed to prevent objects from becoming lodged in the crimping dies, and store the tool in a clean, dry area. Miscrimps or Jams Should this tool ever become stuck or jammed in a partially closed position, Do Not force the handles open or closed. The tool will open easily by lifting the ratchet release lever. See Figure 9. Warranty This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30 days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping, fixturing, or use of handle extensions voids this warranty. CAUTION: Repetitive use of this tool should be avoided. CAUTIONS: 1. Manually powered hand tools are intended for low volume or field repair. This tool is NOT intended for production use. Repetitive use of this tool should be avoided. 2. Insulated rubber handles are not protection against electrical shock. 3. Wear eye protection at all times. 4. Use only the Molex terminals specified for crimping with this tool. Notes: 1. This tool should only be used for the terminals and wire gauges specified on this sheet. 2. This tool is not adjustable for crimp height; however crimp force is adjustable (See instructions above). Variations in tools, terminals, wire stranding, and insulation types may affect crimp height. 3. This tool is intended for standard conductor sizes. It may not give a good insulation crimp support for all insulation sizes. 4. Molex does not repair hand tools (see warranty above). The replacement parts listed are the only parts available for repair. If the handles or crimp tooling is damaged or worn, a new tool must be purchased. Doc No: ATS-6382764HM Revision: B Release Date: 10-14-14 Revision Date: 11-11-15 UNCONTROLLED COPY Page 4 of 6 Hand Crimp Tool for 2.00mm W/B Receptacle Terminals 5. Pull force should be used as the final criteria for an acceptable crimp. Pull force is measured with no influence from the insulation crimp. The insulation should be stripped long (1/2 in.) so the insulation grips on the terminal do not grip the wire insulation or the conductor. Refer to Molex Quality Crimping Handbook 63800-0029 for additional information on crimping and crimp testing. 6. Molex does not certify crimp hand tools. CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling. Applications for the Modular Crimp Head WARNING: NEVER operate, service, install, or adjust this Modular Crimp Head without proper instruction and without first reading and understanding the instructions in the proper Manual or Specification Sheet. See Chart below for the correct Manual or Specification Sheet. WARNING: NEVER install tooling or service this tool while it is into any power source. Disconnect the power by unplugging or turn off the Actuator from its power source. CAUTION: Keep fingers away from the crimping area when operating this tool. It may cause severe injury. CAUTION: Wear safety glasses when operating or serving this tool. The chart below shows all applications for this Modular Crimp Head. Modular Crimp Head Order No. 63827-6470 Tool Tool Adapter Adapter Figure Order no. Description Order No. Description No. 63816-0000 Hand Crimp Frame (Short) N/A N/A 6 63816-0050 Hand Crimp Frame (Long) N/A N/A 6 63816-0200 Battery Power Tool (110 V) 63816-0600 Battery Power Crimp Adapter 7 63816-0250 Battery Power Tool (220 V) 63816-0600 Battery Power Crimp Adapter 7 63816-0100 Air Power Tool 63816-0700 Air Power Crimp Adapter 8 Hand Crimp Tool Applications for the Modular Crimp Head Battery Powered Tool MODULAR CRIMP HEAD LOCKING PINS MODULAR CRIMP HEAD LOCKING PINS BATTERY POWER CRIMP ADAPTER LOCKING PINS HAND CRIMP FRAME LONG OR SHORT Figure 6 Doc No: ATS-6382764HM Revision: B BATTERY POWERED TOOL Air Powered Tool LOCKING PINS AIR POWER CRIMP ADAPTER LOCKING PINS AIR POWER TOOL Figure 7 Release Date: 10-14-14 Revision Date: 11-11-15 MODULAR CRIMP HEAD UNCONTROLLED COPY Figure 8 Page 5 of 6 Hand Crimp Tool for 2.00mm W/B Receptacle Terminals PARTS LIST Hand Crimp Tool 63827-6400 Item Order Number Description Quantity 1 63827-6470 Modular Crimp Head 1 2 63816-0000 Hand Crimp Frame (Short) 1 3 63827-6475 Locator 1 4 63816-0001 Locking Pin 2 5 63600-0525 Handle Spring 1 6 63600-0520 Crimping Spring 2 5 HANDLE SPRING 2 M4 X 8mm LONG BHCS RATCHET RELEASE LEVER 3 LOCATOR Figure 9 4 1 6 CRIMPING SPRING (2) Visit our Web site at http://www.molex.com Doc No: ATS-6382764HM Revision: B Release Date: 10-14-14 Revision Date: 11-11-15 UNCONTROLLED COPY Page 6 of 6