5054173410

10 9 7 8 5 6 3 2 1 NOTES REEL F 4 F 1. FOR DIMENSION OF PRODUCT, REFER TO PRODUCT DRAWING. 2. NUMBER OF CONNECTORS : 7000 PCS/REEL 3. LEAD TAPE LENGTH PULL OUT DIRECTION 100 MIN. �⌀80� E ⌀380 ±2 PULL OUT DIRECTION TOP TAPE BONDED PART (EMPTY) COMPONENT SUPPLIER 　 400 MIN. E TAIL PART (EMPTY) 160 MIN. 4. TOP TAPE PEEL FORCE IS DEFINED BY IEC60286-3. 5. MATERIAL CARRIER TAPE : POLYSTYRENE TOP TAPE : PET , OTHER REEL : POLYSTYRENE (PS)＜RECYCLE MATERIAL CONTAINED＞ D D B ±1 C ±1 "D" (⌀10) C C (120 °) (22) (2) B B (⌀21) CONNECTOR SERIES NO. 505417**09 (⌀13) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DETAIL "D" DOCUMENT STATUS 10 P1 RELEASE DATE 9 2018/07/10 NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:55:44 8 SCALE mm GENERAL TOLERANCES (UNLESS SPECIFIED) A FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 DIMENSION UNITS 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 601150 DRWN: FSATO CHK'D: KSASAKI APPR: TKUSUHARA01 INITIAL REVISION: DRWN: NNAKAZAWA APPR: KMORIKAWA THIRD ANGLE PROJECTION DRAWING 2017/10/24 2018/07/09 2018/07/10 2016/03/16 2016/04/26 SERIES A3-SIZE 505417 3 0.35 BB H=1.0 SSB10RP PLUG EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5054170000 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 H SHEET NUMBER 1 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 PULL OUT DIRECTION F F �2.16� �1.08� E TOP TAPE (1.48) SECTION E-E D (0.98) (A) 1.75 ±0.1 0.3 ±0.05 (7.5) (A) E 16 ±0.3 (2.16) ⌀ 1.5 +0.1 0 E SECTION F-F E (2) F F D ACCUMULATIVE PITCH 40±0.2 4 ±0.1 8 ±0.1 C C 6.68 21.4 17.4 3.88 2.43 16 キャリアテープ幅 CARRIER TAPE WIDTH B C B (A) 5054173010 5054171410 5054170610 EMBOSSED TAPE PACKAGE ORDER NO. 30 14 ------HIGH VOL. LOW VOL. TOOL TOOL SAMPLE PREPARATION ○:TOOLED △:WOOK IN PROCESS ---:TOOLING TO BE CONFIRMED ○ ○ ○ 6 CIRCUIT B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/07/10 ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:55:44 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 601150 DRWN: FSATO CHK'D: KSASAKI APPR: TKUSUHARA01 INITIAL REVISION: DRWN: NNAKAZAWA APPR: KMORIKAWA THIRD ANGLE PROJECTION DRAWING 2017/10/24 2018/07/09 2018/07/10 2016/03/16 2016/04/26 SERIES A3-SIZE 505417 3 0.35 BB H=1.0 SSB10RP PLUG EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5054170000 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 H SHEET NUMBER 2 OF 3 1 A 10 9 7 8 5 6 4 3 2 1 PULL OUT DIRECTION F F (2.16) (1.08) (0.98) G TOP TAPE (D) D (A) 1.75 ±0.1 0.30 ±0.05 (11.5) (A) E 24 ±0.3 (2.16) SECTION G-G SECTION H-H G (2) H H ACCUMULATIVE 4 ±0.1 ⌀ 1.5 +0.1 0 E D PITCH 40±0.2 8 ±0.1 C C 11.93 1.41 29.4 25.4 8.43 1.48 7.38 1.48 24 キャリアテープ幅 CARRIER TAPE WIDTH B (D) C B (A) 5054176010 5054174010 5054173410 ○ --60 ○ --40 ○ --34 EMBOSSED TAPE HIGH VOL. LOW VOL. PACKAGE TOOL TOOL SAMPLE PREPARATION CIRCUIT B ○:TOOLED ORDER NO. △:WOOK IN PROCESS ---:TOOLING TO BE CONFIRMED THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2018/07/10 ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:55:44 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: REVISED EC NO: 601150 DRWN: FSATO CHK'D: KSASAKI APPR: TKUSUHARA01 INITIAL REVISION: DRWN: NNAKAZAWA APPR: KMORIKAWA THIRD ANGLE PROJECTION DRAWING 2017/10/24 2018/07/09 2018/07/10 2016/03/16 2016/04/26 SERIES A3-SIZE 505417 3 0.35 BB H=1.0 SSB10RP PLUG EMBSTP PKG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5054170000 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 H SHEET NUMBER 3 OF 3 1 A 9 7 8 A ±0.2 0.375 ±0.1 0.175 0.7 ±0.1 3 2.0 ±0.2 1.77 ±0.2 0.12 ±0.05 (TERMINAL WIDTH) (FITTING NAIL WIDTH) �0.375� (B) FITTING NAIL F ⌖ 0.15 X �0.375� D HOUSING TERMINAL C NOTES A 1. MATERIAL HOUSING : LIQUID CRYSTAL POLYMER UL94V-0 (COLOR : BLACK) TERMINAL : COPPER ALLOY FITTING NAIL : COPPER ALLOY 2. PLATING TERMINAL : GOLD UNDER PLATING NICKEL *DIVIDE INTO PARTS THE GOLD PLATING OF CONTACT AND THE TAIL PART BY THE NICKEL PLATING. FITTING NAIL : GOLD(ONLY CONTACT AND TAIL PART) UNDER PLATING NICKEL APPLY FOR (CIRCUIT/2)=EVEN 3 4. MATE WITH : 505413**10 5. TAIL AND FITTING NAIL COPLANARITY TO BE 0.08MAXIMUM. PROHIBITED AREA OF PATTERN WIRING AND SOLDER. 6 (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER CAN BE ATTACHED, THEN COVERED WITH A FILM TO KEEP SOLDER OUT.) 7. ELV and RoHS COMPLIANT. DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2021/05/11 1 E 0.15 ±0.05 B 2 0.375 ±0.1 (PITCH) E 3 X (B) ±0.2 0.35 4 (PICK-UP AREA) F 5 6 0.8 ±0.1 10 14.76 13.71 13.01 11.96 11.26 10.91 10.56 9.86 9.51 8.46 7.76 6.71 6.36 6.01 5.66 5.31 4.96 4.61 4.26 3.56 D 7 C B A ----5054177010 70 ----5054176410 64 ○ --5054176010 60 ----54 5054175410 ----5054175010 50 ----5054174810 48 ----5054174610 46 D ----5054174210 42 ○ --5054174010 40 ○ --5054173410 34 ○ --5054173010 30 ----5054172410 24 ----5054172210 22 ----5054172010 20 ----5054171810 18 C ----5054171610 16 ○ --5054171410 14 ----5054171210 12 ----5054171010 10 ○ --5054170610 6 EMBOSSED TAPE MASS LOW VOL. TOOL PACKAGE PRODUCTION SMAPLE PREPARATION CIRCUIT ○: TOOLED B ORDER No. △: WORK IN PROCESS ---: TOOLING TO BE CONFIRMED CONNECTOR No. : 505417**09 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:06:55 8 14.16 11.90 13.56 13.11 10.85 12.51 12.41 10.15 11.81 11.36 9.10 10.76 10.66 8.40 10.06 10.31 8.05 9.71 9.96 7.70 9.36 9.26 7.00 8.66 8.91 6.65 8.31 7.86 5.60 7.26 7.16 4.90 6.56 6.11 3.85 5.51 5.76 3.50 5.16 5.41 3.15 4.81 5.06 2.80 4.46 4.71 2.45 4.11 4.36 2.10 3.76 4.01 1.75 3.41 3.66 1.40 3.06 2.96 0.70 2.36 6 5 4 CURRENT REV DESC: EC NO: 663486 DRWN: KYHWANG CHK'D: TKON APPR: SHOSHIKAWA INITIAL REVISION: DRWN: HONO01 APPR: KMORIKAWA THIRD ANGLE PROJECTION DRAWING 2021/05/10 2021/05/11 2021/05/11 2016/04/25 2016/04/26 SERIES A3-SIZE 505417 3 0.35 BB CONN. H=1.0 SSB10RP PLUG ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5054171000 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 1 OF 2 1 A 9 8 7 6 5 4 3 1 B ±0.03 0.35 ±0.03 0.23 ±0.03 (PITCH) 0.18 ±0.03 (NAIL) (TERM) F D MIN. 1.46 MAX. 6 E 6 C MAX. �0.67� 6 6 6 0.25 MIN. (NAIL) (TERM) 1.33 ±0.03 E 0.535 ±0.03 6 2.07 MIN. 6 (NAIL) 1.0 ±0.03 0.485 ±0.03 F (TERM) 0.375 ±0.03 2 0.33 MIN. 10 D 6 PROHIBITED AREA OF PATTERN WIRING AND SOLDER. (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER CAN BE ATTACHED, THEN COVERED WITH A FILM TO KEEP SOLDER OUT.) MATED CONDITION 0.375 ±0.03 D B ±0.03 �0.48� 0.35 ±0.03 (PITCH) �0.44� 1.0 ±0.1 RECOMMENDED P.W.BOARD PATTERN LAYOUT (REFERENCE) �0.21� 1.38 ±0.03 C 1.05 ±0.03 C �0.16� RECOMMENDED METAL MASK LAYOUT (REFERENCE) RECOMMENDED THICKNESS OF METAL MASK : t=0.08mm RECOMMENDED OPEN APERTURE RATIO OF METAL MASK : 80% B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 10:1 GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 10 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 9 2021/05/11 ± 3.0 ° 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:06:55 8 ANGULAR TOL 7 6 5 4 CURRENT REV DESC: EC NO: 663486 DRWN: KYHWANG CHK'D: TKON APPR: SHOSHIKAWA INITIAL REVISION: DRWN: HONO01 APPR: KMORIKAWA THIRD ANGLE PROJECTION DRAWING 2021/05/10 2021/05/11 2021/05/11 2016/04/25 2016/04/26 SERIES A3-SIZE 505417 3 0.35 BB CONN. H=1.0 SSB10RP PLUG ASSY PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 5054171000 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 F SHEET NUMBER 2 OF 2 1 A