505433-1271

10 9 7 8 5 6 4 3 2 1 注記 NOTES F 材料及び仕上げ（めっき仕様）：TABLE 1, TABLE 2 参照 MATERIAL AND FINISHES(PLATING SPECIFICATION) : SEE TABLE 1,TABLE 2. 2 嵌合相手：505432シリーズ MATE WITH : 505432 SERIES 3. 端子テール部 及び ネイルの平坦度：0.12 MAXIMUM. TAIL AND NAIL COPLANARITY TO BE 0.12 MAXIMUM. 4 極数／２＝偶数に適用。 APPLY FOR CIRCUIT SIZE / 2 = EVEN. 5. コネクタの仕様につきましては、 　製品仕様書(5054320000PS002)を参照して下さい。 　PLEASE REFER TO THE PRODUCT SPECIFICATION 　(5054320000PS002) 　ABOUT THE SPECIFICATION OF THE CONNECTOR. 6 製品番号 MATERIAL No. F 1 回路番号１マーク CIRCUIT 1 MARK A 回路番号１ CIRCUIT 1 (B) 回路番号N-1 CIRCUIT N-1 (1.45) E ℄ E 8.4 4.1 (NAIL) (9.05) 505433 ** * * 極数 CIRCUIT SIZE 番号 カバーテープ NO. COVER TAPE 7 無　WIITHOUT D 0.65 ±0.15 (0.4) 回路番号N CIRCUIT N 8 回路番号 2 CIRCUIT２ (1.25) (PITCH) (0.625) 4 (0.1) (NAIL THICNKESS) 1 ① ② ③ A ④ ハウジング HOUSING ターミナル 及び ネイル TERMINAL AND NAIL DOCUMENT STATUS 10 (TERMINAL) (8.4) SECTION Z-Z ④カバーテープ TABLE 1 COVER TAPE 材質 MATERIAL J ポリアミド(PA)　UL94V-0 色：注記6参照 POLY AMIDE(PA) UL94V-0 COLOR : SEE NOTE 6 ③ネイル NAIL 錫ビスマスめっき : 1.0 micro-meter MINIMUM MATTE TIN-BISMUTH PLATING ニッケルめっき（下地）: 1.0 micro-meter MINIMUM NICKEL (UNDER PLATING) P1 RELEASE DATE 9 ①ハウジング HOUSING ②ターミナル TERMINAL 2019/07/31 7 DIMENSION UNITS SCALE mm NTS 1 黒　BLACK 2 赤　RED 4 青　BLUE 6 緑　GREEN H G F E D D 29.4 28.15 26.9 25.65 24.4 23.15 21.9 20.65 19.4 18.15 16.9 15.65 14.4 13.15 11.9 10.65 9.4 8.15 25 23.75 22.5 21.25 20 18.75 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 3.75 30.85 29.6 28.35 27.1 25.85 24.6 23.35 22.1 20.85 19.6 18.35 17.1 15.85 14.6 13.35 12.1 10.85 9.6 42 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 C B A 極数 CIRCUIT SIZE C B 6 5 CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:36 8 ナチュラル（ベージュ） NATURAL(BEIGE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 黄銅 BRASS カバーテープ ポリイミド COVER TAPE POLYIMIDE FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 1 (C) (NAIL POSITION) B 番号 部品 NO. PART 1 (TERMINAL) Z (0.3) 0 26.25 25 23.75 22.5 49.4 45.4 20.2 44 21.25 20 18.75 17.5 16.25 4.2 15 13.75 37.4 33.4 14.2 32 12.5 11.25 10 8.75 7.5 29.4 25.4 11.5 24 6.25 5 7.25 ℄ ハウジングカラー HOUSING COLOR 5 Z C 有　WITH 番号 NO. 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: TAKAIKE APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/17 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/12/26 2016/12/28 SERIES A3-SIZE 505433 3 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY 5054330000 MATERIAL NUMBER CUSTOMER SEE SHEET4 2 GENERAL PSD 000 C SHEET NUMBER 1 OF 4 1 A 10 F 9 7 8 5 6 4 3 2 1 製品形状 PRODUCT SHAPE F E E 26-32極 26-32 CIRCUIT 16-24極 16-24 CIRCUIT 8-14極 8-14 CIRCUIT 42極 42 CIRCUIT 34-40極 34-40 CIRCUIT D D (A) CONNECTOR B±0.1 嵌合状態図 MATED CONNECTORS B ℄ OF CIRCUIT N (A) AND B CIRCUIT 2 DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 2019/07/31 7 (8.55) C (8.6) (9.2) (0.95) 10:52:36 8 (A) B 基板パターンレイアウト（参考） （参考：基板厚 1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) RECOMMEND PWB LAYOUT : COMPONENT SIDE (REFERENCE : PWB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) パターン非推奨エリア パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECOMMENDED ON THE HATCHING AREA PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHING AREA. A (9.2) (0.5) TYP.(2) 1.6 ±0.05 製品輪郭線 PART OUTLINE 8.99 ±0.1 4.8 ±0.1 C 嵌合相手：505432シリーズ MATE WITH : 505432 SERIES (8.6) 0.8 MINIMUM TYP.(N) CIRCUIT N-1 2 DISTANCE FROM CONNECTOR OUTLINE TO PAD CIRCUIT NO.2. 1.6 ±0.05 CIRCUIT 1 0.74 ±0.05 1 ±0.1 (0.8) TYP.(4) (0.8) TYP.(N) 公差非累積 1.25 ±0.05 (PITCH) NON-ACCUMULATIVE 2.2 ±0.1 6 5 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: TAKAIKE APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/17 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/12/26 2016/12/28 SERIES A3-SIZE 505433 3 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY 5054330000 MATERIAL NUMBER CUSTOMER SEE SHEET4 2 GENERAL PSD 000 C SHEET NUMBER 2 OF 4 1 A 10 F 9 7 8 5 6 4 3 2 1 吸着エリア違い VACUUM AREA DIFFERENCE F D Y 1.59 ℄ (4.4) ℄ E E SECTION Y-Y 吸着高さ VACUUM HEIGHT Y 505433 **7* カバーテープ無し WITHOUT COVER TAPE ④カバーテープ E D X D COVER TAPE C (6.3) (7.4) COVER TAPE WIDTH 9 ℄ C 34-42 CIRCUIT 8-32 CIRCUIT X SECTION X-X 吸着テープ高さ COVER TAPE HEIGHT 505433 **8* カバーテープ有り WITH COVER TAPE B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 2019/07/31 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:36 8 ANGULAR TOL 7 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: TAKAIKE APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/17 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/12/26 2016/12/28 SERIES A3-SIZE 505433 3 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY 5054330000 MATERIAL NUMBER CUSTOMER SEE SHEET4 2 GENERAL PSD 000 C SHEET NUMBER 3 OF 4 1 A DETAIL W 44ｍｍ幅テープ TAPE WIDTH : 44mm コネクタ 中心位置 CENTER OF CONENCTOR (G) F ±0.3 REEL 引き出し方向 1.75 ±0.1 C TYP.(2) DETAIL W 4 ±0.1 (PITCH) 累積ピッチ：40±0.2 ACCUMULATIVE PITCH ⌀ 1.5 +0.1 0 E V TOP TAPE DETAIL V 部品挿入部 COMPONENT SUPPLIER 400MINIMUM 6 ( 7.8 ) 末端部 （空部） TAIL PART (EMPTY) 160MINIMUM 1 BLUE RED BLACK 5054334276 5054334076 5054333876 5054333676 5054333476 5054333276 5054333076 5054332876 5054332676 5054332476 5054332276 5054332076 5054331876 5054331676 5054331476 5054331276 5054331076 5054330876 5054334274 5054334074 5054333874 5054333674 5054333474 5054333274 5054333074 5054332874 5054332674 5054332474 5054332274 5054332074 5054331874 5054331674 5054331474 5054331274 5054331074 5054330874 5054334272 5054334072 5054333872 5054333672 5054333472 5054333272 5054333072 5054332872 5054332672 5054332472 5054332272 5054332072 5054331872 5054331672 5054331472 5054331272 5054331072 5054330872 5054334271 5054334071 5054333871 5054333671 5054333471 5054333271 5054333071 5054332871 5054332671 5054332471 5054332271 5054332071 5054331871 5054331671 5054331471 5054331271 5054331071 5054330871 GREEN BLUE RED BLACK 5054334286 5054334086 5054333886 5054333686 5054333486 5054333286 5054333086 5054332886 5054332686 5054332486 5054332286 5054332086 5054331886 5054331686 5054331486 5054331286 5054331086 5054330886 5054334284 5054334084 5054333884 5054333684 5054333484 5054333284 5054333084 5054332884 5054332684 5054332484 5054332284 5054332084 5054331884 5054331684 5054331484 5054331284 5054331084 5054330884 5054334282 5054334082 5054333882 5054333682 5054333482 5054333282 5054333082 5054332882 5054332682 5054332482 5054332282 5054332082 5054331882 5054331682 5054331482 5054331282 5054331082 5054330882 5054334281 5054334081 5054333881 5054333681 5054333481 5054333281 5054333081 5054332881 5054332681 5054332481 5054332281 5054332081 5054331881 5054331681 5054331481 5054331281 5054331081 5054330881 NATURAL (BEIGE) 5054334280 5054334080 5054333880 5054333680 5054333480 5054333280 5054333080 5054332880 5054332680 5054332480 5054332280 5054332080 5054331880 5054331680 5054331480 5054331280 5054331080 5054330880 HOUSING COLOR 42 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 D C B 極数 CIRCUIT SIZE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ⑤ キャリアテープ ポリスチレン(PS) CARRIER TAPE POLYSTYRENE(PS) ⑥ トップテープ TOP TAPE ポリエチレン(PE)、その他 POLYETHYLENE(PE), OTHER リール REEL ポリスチレン(PS)＜リサイクル材を含む＞ POLYSTYRENE(PS)＜RECYCLE MATERIAL CONTAINED＞ 9 NATURAL (BEIGE) 5054334270 5054334070 5054333870 5054333670 5054333470 5054333270 5054333070 5054332870 5054332670 5054332470 5054332270 5054332070 5054331870 5054331670 5054331470 5054331270 5054331070 5054330870 キャリアテープ梱包 PACKAGING STYLE : CARRIER TAPE AND REEL TABLE 2 RELEASE DATE COVER TAPE 発注番号　ORDER NO. 材質 MATERIAL P1 製品一覧 PRODUCT LIST 有　WITH GREEN 10. トップテープの剥離強度については、IEC60286-3に準拠 TOP TAPE PEEL FORCE IS DEFINED BY IEC 60286-3. DOCUMENT STATUS J± 1 無　WITHOUT ( 0.5 ) (PITCH) B 番号 部品 NO. PART H ±1 ⑥トップテープ (16) PULL OUT DIRECTION 10 (120°) (0.2) CARRIER TAPE 引き出し方向 FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 F R 0.75 +0.05 0 ⑤キャリアテープ 7. 梱包数量　：　500個 NUMBER OF CONNECTIORS : 500 PIECES/REEL. 8. 梱包仕様書：5054339200 PS 200 PACKING SPECIFICATION : 5054339200 PS 200 9. リードテープ長さ トップテープ接着部（空部） LEAD TAPE LENGTH 100 MINIMUM TOP TAPE BONDED PART(EMPTY) ⑦ 1 ⑦リール 1.5 +0.1 0 (⌀21) NOTES A 2 コネクタ CONNECTOR (2) D 3 (⌀10) 24ｍｍ幅テープ TAPE WIDTH : 24mm 28.4 ±0.1 40.4 ±0.1 E 4 PULL OUT DIRECTION 32ｍｍ幅テープ TAPE WIDTH : 32mm エンボスポケット中心位置 CENTER OF EMBOSSED POCKET 5 6 Φ380 ±2 引き出し方向 PULL OUT DIRECTION F 7 8 (22) 9 0.2 ±0.05 10 2019/07/31 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:36 8 ANGULAR TOL 7 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: TAKAIKE APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/17 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/12/26 2016/12/28 SERIES A3-SIZE 505433 3 MICRO-LOCK PLUS 1.25 W/B DUAL ROW VERTICAL SMT PLUG ASSEMBLY 5054330000 MATERIAL NUMBER CUSTOMER SEE SHEET4 2 GENERAL PSD 000 C SHEET NUMBER 4 OF 4 1 A