5054480871

9 4 E 4 注記 NOTES (0.625) 3 2 材料及び仕上げ（めっき仕様）：TABLE 1, TABLE2 参照 MATERIAL AND FINISHES(PLATING SPECIFICATION) : SEE TABLE 1, TABLE2. 2 嵌合相手：505432シリーズ MATE WITH : 505432 SERIES 3. 端子テール部 及び ネイルの平坦度：0.12MAXIMUM. TAIL AND NAIL COPLANARITY TO BE 0.12 MAXIMUM. 4 極数／２＝偶数に適用。 APPLY FOR CIRCUIT SIZE / 2 = EVEN. 5. コネクタの仕様につきましては、 製品仕様書(5054320000PS002)を参照して下さい。 PLEASE REFER TO THE PRODUCT SPECIFICATION (5054320000PS002)ABOUT THE SPECIFICATION OF THE CONNECTOR. 6 発注番号：SHEET 3 参照 ORDER No. : PLEASE REFER TO SHEET 3 FOR PRODUCT LIST ℄ 回路番号 1 マーク CIRCUIT 1 MARK (C) VACUUM AREA A 回路番号 N-1 CIRCUIT N-1 (1.05) 回路番号 1 (B) 3.65 (NAIL) F E 505448 **7* SECTION Y-Y CIRCUIT 1 Z ℄ Y 極数 CIRCUIT SIZE NO. ハウジングカラー HOUSING COLOR 0 ナチュラル（ベージュ） NATURAL(BEIGE) 1 黒　BLACK ③ターミナル（上） 8.95 TERMINAL(UPPER) D 1 1 (5.15) 0.42 ±0.15 (1.25) (PITCH) (0.4) 5 6 8.43 F 7 8 VACUUM AREA 10 2 赤　RED 4 青　BLUE 6 緑　GREEN D ②ターミナル（下） TERMINAL(LOWER) (0.4) (0.3) (1.25) (NAIL THICKNESS) (PITCH) 回路番号 N CIRCUIT N Z 4 (0.625) Y 回路番号 2 CIRCUIT 2 1.5 (TERMINAL) (D) (NAIL POSITION) 29.4 28.15 26.9 25.65 49.4 45.4 20.2 44 24.4 23.15 21.9 20.65 19.4 18.15 16.9 37.4 33.4 14.2 32 15.65 14.4 13.15 11.9 10.65 29.4 25.4 11.5 24 9.4 8.15 1.5 (TERMINAL) (8.8) SECTION Z-Z C ①ハウジング HOUSING B 1 ④ネイル TABLE 1 番号 NO. 部品 PART 材質 MATERIAL ① ハウジング HOUSING POLYAMIDE(PA)　UL94V-0 色：注記6参照 POLYAMIDE(PA) UL94V-0 COLOR : SEE NOTE6. ② A ③ ④ ターミナル 及び ネイル TERMINAL AND NAIL 黄銅 BRASS DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 9 DIMENSION UNITS SCALE mm NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:38 8 F E D 30.85 29.6 28.35 27.1 25.85 24.6 23.35 22.1 20.85 19.6 18.35 17.1 15.85 14.6 13.35 12.1 10.85 9.6 42 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 C B A 極数 CIRCUIT SIZE C B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき（下地）: 1.0 micro-meter MINIMUM. NICKEL (UNDER PLATING) 2019/07/31 G 25 23.75 22.5 21.25 20 18.75 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 3.75 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 錫ビスマスめっき : 1.0 micro-meter MINIMUM. MATTE TIN-BISMUTH PLATING RELEASE DATE H NAIL 26.25 25 23.75 22.5 21.25 20 18.75 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 7 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: TAKAIKE APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/07/26 2019/07/29 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/01/18 2017/04/03 SERIES A3-SIZE 505448 3 MICRO-LOCK PLUS 1.25 W/B DUAL ROW RA SMT EMBOSSED TAPE PKG 5054480000 MATERIAL NUMBER CUSTOMER SEE SHEET 3 2 GENERAL PSD 000 B SHEET NUMBER 1 OF 3 1 A 10 F 9 7 8 6 5 4 3 2 1 製品形状 PRODUCT SHAPE F E E 26-32極 26-32 CIRCUIT 42極 42 CIRCUIT 34-40極 34-40 CIRCUIT D 嵌合状態図 MATED CONNECTORS 嵌合間口側 MATING SIDE (A) B±0.1 2 CIRCUIT N 公差非累積 1.25 ±0.05 NON-ACCUMULATIVE(PITCH) 嵌合相手：505432シリーズ MATE WITH : 505432 SERIES (10.8) (A) (10.38) C (9.1) (9.1) 4.85 ±0.1 CIRCUIT 2 0.7 ±0.05 0.8 ±0.05 TYP.(N) (0.8) TYP.(2) 9.4 C 2 ±0.05 2 ±0.05 D 16-24極 16-24 CIRCUIT (0.25) DISTANCE FROM CONNECTOR OUTLINE TO PAD CIRCUIT NO.2. (0.3) TYP.(2) 8-14極 8-14 CIRCUIT 製品輪郭線 PART OUTLINE B B (0.7) TYP.(2) CIRCUIT 1 1 ±0.1 CIRCUIT N-1 ℄ OF 2.2 ±0.1 (A) AND B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 基板パターンレイアウト（参考） （参考：基板厚 1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) RECOMMEND PWB LAYOUT : COMPONENT SIDE (REFERENCE : PWB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) パターン非推奨エリア パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECOMMENDED ON THE HATCHING AREA PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHING AREA. A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 2019/07/31 7 6 SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:38 8 DIMENSION UNITS 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: TAKAIKE APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/07/26 2019/07/29 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/01/18 2017/04/03 SERIES A3-SIZE 505448 3 MICRO-LOCK PLUS 1.25 W/B DUAL ROW RA SMT EMBOSSED TAPE PKG 5054480000 MATERIAL NUMBER CUSTOMER SEE SHEET 3 2 GENERAL PSD 000 B SHEET NUMBER 2 OF 3 1 A 9 7 8 5 6 4 REEL 引き出し方向 44ｍｍ幅テープ TAPE WIDTH : 44mm (⌀10) (22) コネクタ CONNECTOR E (⌀21) 28.4 ±0.1 40.4 ±0.1 (120°) (0.2) 24ｍｍ幅テープ TAPE WIDTH : 24mm W (F) G±1 ⑤キャリアテープ コネクタ 中心位置 CENTER OF CONNECTOR E ±0.3 DETAIL W H ±1 CARRIER TAPE 6 1.75 累積ピッチ：40±0.2 ACCUMULATIVE PITCH ⑥トップテープ TOP TAPE 4 ±0.1 ( 0.5 ) 0.2 ±0.05 ±0.1 (2) ⌀1.5 ( 9.35 ) (PITCH) +0.1 0 1.5 +0.1 0 (16) R 0.75 +0.05 0 注記 NOTES TYP.(2) 7. 梱包数量　：　500個 NUMBER OF CONNECTIORS : 500 PIECES/REEL. 8. 梱包仕様書：5054489200 PS 200 PACKING SPECIFICATION : 5054489200 PS 200 9. リードテープ長さ LEAD TAPE LENGTH トップテープ接着部（空エンボス） 100 PIECES MINIMUM TOP TAPE BONDED PART(EMPTY) C DETAIL X 引き出し方向 PULL OUT DIRECTION 部品挿入部 COMPONENT SUPPLIER 400MINIMUM TABLE 2 1 ⑥ トップテープ TOP TAPE DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 9 赤 RED 黒 BLACK 5054484276 5054484076 5054483876 5054483676 5054483476 5054483276 5054483076 5054482876 5054482676 5054482476 5054482276 5054482076 5054481876 5054481676 5054481476 5054481276 5054481076 5054480876 5054484274 5054484074 5054483874 5054483674 5054483474 5054483274 5054483074 5054482874 5054482674 5054482474 5054482274 5054482074 5054481874 5054481674 5054481474 5054481274 5054481074 5054480874 5054484272 5054484072 5054483872 5054483672 5054483472 5054483272 5054483072 5054482872 5054482672 5054482472 5054482272 5054482072 5054481872 5054481672 5054481472 5054481272 5054481072 5054480872 5054484271 5054484071 5054483871 5054483671 5054483471 5054483271 5054483071 5054482871 5054482671 5054482471 5054482271 5054482071 5054481871 5054481671 5054481471 5054481271 5054481071 5054480871 HOUSING COLOR 42 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 D C B 極数 CIRCUIT SIZE 梱包形態：キャリアテープ梱包 PACKAGING STYLE : CARRIER TAPE AND REEL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ポリスチレン(PS) ＜リサイクル材を含む＞ POLYSTYRENE(PS) ＜RECYCLE MATERIRAL CONTAINED＞ RELEASE DATE 青 BLUE 発注番号 ORDER NO. ポリエチレン(PE)、その他 POLYETHYLENE(PE), OTHER P1 緑 GREEN ナチュラル （ベージュ） NATURAL (BEIGE) 5054484270 5054484070 5054483870 5054483670 5054483470 5054483270 5054483070 5054482870 5054482670 5054482470 5054482270 5054482070 5054481870 5054481670 5054481470 5054481270 5054481070 5054480870 DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) キャリアテープ ポリスチレン(PS) CARRIER TAPE POLYSTYRENE(PS) リール REEL 505448**7* 製品番号一覧 PRODUCT NUMBER LIST 160MINIMUM 材質 MATERIAL ⑤ ⑦ 末端部 （空部） TAIL PART (EMPTY) 10. トップテープの剥離強度については、IEC60286-3に準拠 TOP TAPE PEEL FORCE IS DEFINED BY IEC60286-3. 番号 部品 NO. PART A F PULL OUT DIRECTION 32ｍｍ幅テープ TAPE WIDTH : 32mm エンボスポケット中心位置 CENTER OF EMBOSSED POCKET B 1 ⑦リール F D 2 DETAIL X 引き出し方向 PULL OUT DIRECTION E 3 Φ380 ±2 10 2019/07/31 7 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:38 8 ANGULAR TOL 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: TAKAIKE APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/07/26 2019/07/29 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/01/18 2017/04/03 SERIES A3-SIZE 505448 3 MICRO-LOCK PLUS 1.25 W/B DUAL ROW RA SMT EMBOSSED TAPE PKG 5054480000 MATERIAL NUMBER CUSTOMER SEE SHEET 3 2 GENERAL PSD 000 B SHEET NUMBER 3 OF 3 1 A