5054731010

7 8 引き出し方向 4 3 2 1 NOTES: REEL PULL OUT DIRECTION 1. 詳細寸法については製品単体図面を参照ください。 RE DETAILD DIMENSION,SEE SALES DRAWING FOR CONNECTOR 2. 梱包数量：6000個/リール 3. NUMBER OF CONNECTOR : 6000PCS/REEL 20PCS.MIN.トップテープ接着部(空エンボス) TOP TAPE BONDED PART.(EMPTY) リードテープ長さ LEAD TAPE LENGTH (⌀80) E 5 6 ⌀330±2 9 引き出し方向 PULL OUT DIRECTION D 20PCS 末端部(空部) COMPONENT SUPPLIER 400MIN. E TAIL PART (EMPTY) 　 部品挿入部 160MIN. D 4. トップテープ剥離強度はIEC60286-3.準拠 PEEL-OFF FORCE OF TOP TAPE : BASED UPON IEC60286-3. 5. MATERIAL CARRIER TAPE : POLYSTYREN�PS� TOP TAPE : PET , OHTER REEL : POLYSTYREN �PS� [RECYCLE MATERIAL CONTAINED] 17.4 ±1 "D" 21.4 ±1 6. ELV AND RoHS COMPLIANT C C (⌀10) (120°) (22) (2) B MODEL NO. 505473**10 (⌀21) 2015/08/20 2015/10/13 2015/10/13 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION EC DESCRIPTION (⌀13) DETAIL "D" RELEASE STATUS FORMAT: tb-prod-A3 REVISION: B DATE: 2015/8/12 9 P1 RELEASE DATE 2015/10/13 8 A 02:28:14 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 101345 GMATSUNO KMORIKAWA KMORIKAWA B 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE mm 1:5 DRWN BY DATE 2015/08/20 GMATSUNO 0.4 BB CONN. RB REC. ASSY EMBSTP PKG DATE CHK'D BY KTANAKA03 APPR BY KMORIKAWA DRAWING SIZE A DATE 2015/10/13 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 505473 SEE CHART DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 5054730000 3 CUSTOMER 2 PSD 1 OF 2 000 1 9 7 8 5 6 4 3 2 1 PULL OUT DIRECTION E E �5� �2.14� �1.07� X D D �7.5� 16 ±0.3 A TOP TAPE 1.75 ±0.1 0.3 ±0.05 �1.35� SECTION X-X �A� �0.78� ⌀ 1.5 � 2� X 8 ±0.1 +0.1 -0.0 ACCUMULATIVE PITCH 40±0.2 4 ±0.1 C C 16 4 4 4 5.72 5.32 4.92 8 6 4 --○ ○ 5054731210 5054731010 5054730810 FOR POWER FOR SIGNAL EMBOSSED TAPE PACKAGE B キャリアテープ幅 CARRIER TAPE WIDTH A USAGE ORDER NO. ------- 12 10 8 HIGH VOL. LOW VOL. TOOL TOOL SAMPLE PREPARATION ○ : TOOLED △：　WORK　IN　PROCESS ---: TOOLING TO BE CONFIRMED B CIRCUIT RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: B DATE: 2015/8/12 9 P1 RELEASE DATE 2015/10/13 8 A 02:28:14 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 101345 GMATSUNO KMORIKAWA KMORIKAWA EC DESCRIPTION 2015/08/20 2015/10/13 2015/10/13 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE mm 2:1 DRWN BY DATE 2015/08/20 GMATSUNO 0.4 BB CONN. RB REC. ASSY EMBSTP PKG DATE CHK'D BY KTANAKA03 APPR BY KMORIKAWA DRAWING SIZE A DATE 2015/10/13 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 505473 SEE CHART DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 5054730000 3 CUSTOMER 2 PSD 2 OF 2 000 1 9 7 8 5 6 A 4 3 0.2 2 0.68 (PITCH) (PICK-UP AREA) 0.4 D C D 1.33 ±0.1 (C) HOUSING 1.33 ±0.1 0.95 0.95 (B) TERMINAL FOR SIGNAL FITTING NAIL TERMINAL FOR POWER 0.30 (FITTING NAIL WIDTH) 0.22 (FITTING NAIL WIDTH) 0.54 0.225 (FITTING NAIL WIDTH) B 1.105 4 4 4 8 6 4 --○ ○ 5054731210 5054731010 5054730810 FOR POWER FOR SIGNAL EMBOSSED TAPE PACKAGE ⌖ 0.15 X D (SIGNAL TERM. WIDTH) C B E D C 1.23 2.46 1.2 5.6 1.03 2.06 0.8 5.2 0.83 1.66 0.4 4.8 ⌖ 0.15 X (POWER TERM. WIDTH) 0.14 1 0.58 C 2 NOTES 1. MATERIAL HOUSING : LIQUID CRYSTAL POLYMER UL94V-0(COLOR : BLACK) TERMINAL FOR SIGNAL CIRCUIT : COPPER ALLOY TERMINAL FOR POWER CIRCUIT : COPPER ALLOY FITTING NAIL : COPPER ALLOY 2. PLATING TERMINAL FOR SIGNAL AND POWER CIRCUIT: GOLD UNDER PLATING : NICKEL *DIVIDE INTO PARTS THE GOLD PLATING OF THE CONTACT AND THE TAIL PART BY THE NICKEL PLATING. FITTING NAIL: GOLD(SOLDER TAIL) UNDER PLATING : NICKEL 3 APPLY FOR (CIRCUIT/2)=EVEN. 4. MATE WITH:505476 SERIES. 5. TAIL AND FITTING NAIL COPLANARITY TO BE 0.08 MAXIMUM. 6 PROHIBITED AREA OF PATTERN WIRING AND SOLDER. (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER CAN BE ATTACHED, THEN COVERED WITH A FILM TO KEEP SOLDER OUT.) 7. ELV and RoHS COMPLIANT. X B E 3 A USAGE ORDER NO. ------- 12 10 8 HIGH VOL. LOW VOL. TOOL TOOL SAMPLE PREPARATION ○ : TOOLED △：　WORK　IN　PROCESS ---: TOOLING TO BE CONFIRMED CIRCUIT B CONNECTOR SERIES No. : 505473**09 RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: B DATE: 2015/8/12 9 P1 RELEASE DATE 2015/10/13 8 02:28:16 7 6 5 A REV EC NO: DRWN: CHK'D: APPR: A GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 101345 GMATSUNO KMORIKAWA KMORIKAWA EC DESCRIPTION 2015/07/16 2015/10/13 2015/10/13 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE mm 10:1 DRWN BY DATE 2015/07/16 GMATSUNO 0.4 BB CONN.H=0.6 RB REC ASSY DATE CHK'D BY KTANAKA03 APPR BY KMORIKAWA DRAWING SIZE A DATE 2015/10/13 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 505473 SEE CHART DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5054731000 2 PSD 000 1 1 OF 2 7 1.45 ±0.03 E 5 6 4 3 1.45 ±0.03 C ±0.03 6 (C+0.8)MIN. (0.24) 0.4 ±0.03 (PITCH) (0.42) (0.385) 0.685 ±0.03 1.0 ±0.03 0.35 ±0.03 (0.66) 6 1.5 ±0.03 0.7 MIN. 6 6 �0.1� 0.4 ±0.03 0.4 ±0.03 E (B) 0.24 ±0.03 0.385 ±0.03 0.355 ±0.03 0.72 ±0.03 1.03 ±0.03 D 1 (C) B ±0.03 0.66 ±0.03 2 (0.44) 0.39 ±0.03 (0.43) 0.89 ±0.03 D 1.5 +0.06 -0.00 8 (0.35) 9 (0.93) CONNECTOR RECOMMENDED METAL MASK LAYOUT (REFERENCE) RECOMMENDED P.W.BOARD PATTERN LAYOUT (REFERENCE) RECOMMENDED THICKNESS OF METAL MASK : t=0.08mm 6 PROHIBITED AREA OF PATTERN WIRING AND SOLDER. (FOR EACH AREA, THE WIRING THAT TOUCHES ON THE SOLDER RECOMMENDED OPEN APERTURE RATIO OF METAL MASK :TAIL 100% , NAIL120% CAN BE ATTACHED, THEN COVERED WITH A FILM TO KEEP SOLDER OUT.) C B 0.6 B C MATED CONDITION RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: B DATE: 2015/8/12 9 P1 RELEASE DATE 2015/10/13 8 02:28:16 7 6 5 A REV EC NO: DRWN: CHK'D: APPR: A GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 101345 GMATSUNO KMORIKAWA KMORIKAWA EC DESCRIPTION 2015/07/16 2015/10/13 2015/10/13 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 PLACES ± 0.03 3 PLACES ± 0.03 2 PLACES ± 0.05 1 PLACE ± 0.1 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE mm 10:1 DRWN BY DATE 2015/07/16 GMATSUNO 0.4 BB CONN.H=0.6 RB REC ASSY DATE CHK'D BY KTANAKA03 APPR BY KMORIKAWA DRAWING SIZE A DATE 2015/10/13 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 505473 SEE CHART DOCUMENT NUMBER 3 CUSTOMER GENERAL DOC TYPE DOC PART SHEET NUMBER 5054731000 2 PSD 000 1 2 OF 2