505568-0370

10 9 7 8 5 6 4 3 2 1 注記 NOTE (0.2) (NAIL THICKNESS) ④カバーテープ ℄ COVER TAPE 材料及び仕上げ（めっき仕様）：TABLE 1, TABLE 2 参照 MATERIAL AND FINISHED (PLATING SPECIFICATION) : SEE TABLE 1, TABLE 2. 2 嵌合相手：505565シリーズ MATE WITH: 505565 SERIES 偶数極 に適用 3 APPLY FOR EVEN CIRCUIT. 4. 製品仕様書：5055650000 PS 000 PRODUCT SPECIFICATION:5055650000 PS 000 5 発注番号 : SHEET 5参照 ORDER NO. : PLEASE REFER TO SHEET 5. 1 4.2 F (C) (NAIL POSITION) A 回路番号１マーク CIRCUIT 1 MARK (B) E 505568 ** 7 * Z D±0.25 COVER TAPE (0.4) 回路番号１ (1.25) CIRCUIT 1 (0.625) 3 Z 回路番号N CIRCUIT N ③ ネイル ① ハウジング NAIL ② ターミナル 奇数キャビティ：キャビティ番号及び金型番号 偶数キャビティ：トレードマーク C ODD CAVITY:CAVITY AND MOLD NO. EVEN CAVITY:TRADE MARK 1 番号 部品 NO. PART ① ハウジング HOUSING 49.4 45.4 20.2 12 37.4 33.4 14.2 ② ターミナル TERMINAL TABLE 1 10 ODD CAVITY:TRADE MARK EVEN CAVITY:CAVITY AND MOLD NO. 材質 MATERIAL 29.4 25.4 11.5 24 ポリアミド(PA),ガラス充填,UL94 V-0,色：SHEET 5参照 POLYAMIDE (PA),GLASS FILLED,UL94 V-0,COLOR:SEE SHEET 5 21.4 17.4 7.5 錫ビスマスめっき：1.0 MICRO-METER MINIMUM MATTE TIN-BISMUTH PLATING H A ④ DOCUMENT STATUS 10 DIMENSION UNITS SCALE mm NTS 錫めっき：1.0 MICROMETER MINIMUM MATTE TIN PLATING ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 ニッケルめっき(下地全面) : 1.0 MICROMETER MINIMUM NICKEL (UNDER-PLATING OVERALL) 3 PLACES ± 0.2 2 PLACES ± 0.2 P1 RELEASE DATE 9 ナチュラル（ベージュ） NATURAL(BEIGE) 1 黒 BLACK 2 赤 RED 3 黄 YELLOW 4 青 BLUE 6 緑 GREEN 8 橙 ORANGE D 8 G F 16 +0.3 -0.1 E 5 D 22.2 20.95 19.7 18.45 17.2 15.95 14.7 13.45 12.2 10.95 9.7 8.45 7.2 5.95 4.7 18.75 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 3.75 2.5 1.25 23.25 22 20.75 19.5 18.25 17 15.75 14.5 13.25 12 10.75 9.5 8.25 7 5.75 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C B A 極数 CIRCUIT SIZE C B CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) カバーテープ ポリイミド COVER TAPE POLYIMIDE FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 黄銅 BRASS ネイル NAIL +0.3 -0.1 7 ニッケルめっき(下地全面) : 1.0 MICROMETER MINIMUM NICKEL (UNDER-PLATING OVERALL) ③ 32±0.3 奇数キャビティ：トレードマーク 偶数キャビティ：キャビティ番号及び金型番号 黄銅 BRASS B 44±0.3 SECTION Z-Z TERMINAL E 6. ターミナルとネイルの平坦度は0.1mm以下 TERMINAL AND NAIL COPLANARITY : 0.1mm MAXIMUM. 1.5 (NAIL) HOUSING 0.65 ±0.1 (TERMINAL) 0.63 ±0.1 3.85 (0.4) D 番号 ハウジングカラー NO. HOUSING COLOR 極数 CIRCUIT SIZE ℄ F 2019/07/31 ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:46 8 1 PLACE 7 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/26 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/08/28 2017/09/26 SERIES A3-SIZE 505568 3 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY 5055680000-SD MATERIAL NUMBER CUSTOMER SEE SHEET5 2 GENERAL PSD 000 B SHEET NUMBER 1 OF 5 1 A 9 7 8 6 5 4 3 (A) (0.4) TYP.(2) (0.4) TYP.(2) 1 嵌合相手：505565シリーズ MATE WITH : 505565 SERIES F (A) (4.2) 1.25 ±0.1 2.15 ±0.1 (1.1) 1.3 ±0.1 2 (CONNECTOR) 2 製品輪郭線 PART OUTLINE ℄ OF (A) AND (B) 3.97 ±0.1 (0.28) F DIFFERENCE FROM CONNECTOR OUTLINE TO NAIL PAD 10 1.2 ±0.1 TYP.(2) (7.4) E (1.9) E 回路番号 1 0.8 ±0.05 回路番号 N CIRCUIT 1 1.25 ±0.05 回路番号 2 公差非累積 NON-ACCUMULATIVE (B) CIRCUIT 2 0.625 ±0.1 3 CIRCUIT N 嵌合状態図 MATED CONNECTORS 基板パターンレイアウト（参考） RECOMMEND PWB LAYOUT : COMPONENT SIDE （参考：基板厚 1.6mm, メタルマスク厚さ 0.15mm, マスク開口率 100%) (REFERENCE : PWB THICKNESS 1.6mm, STENCIL THICKNESS 0.15mm, APERTURE RATIO 100%) D D パターン非推奨エリア パターンを引き回す際は、製品機能に影響がないことをご確認ください。 PATTERN IS NOT RECOMMENDED ON THE HATCHING AREA PLEASE CHECK NOT TO HAVE PROBLEM FOR PRODUCT FUNCTION WHEN SETTING PATTERN ON THE HATCHING AREA. カバーテープ COVER TAPE (D) C (3.4) C 吸着範囲 VACUUM AREA B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 2019/07/31 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:46 8 ANGULAR TOL 7 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/26 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/08/28 2017/09/26 SERIES A3-SIZE 505568 3 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY 5055680000-SD MATERIAL NUMBER CUSTOMER SEE SHEET5 2 GENERAL PSD 000 B SHEET NUMBER 2 OF 5 1 A 10 F 9 8 7 6 5 4 3 2 1 製品形状 PRODUCT SHAPE F E E 2-11極 2-11 CIRCUIT 12-13極 12-13 CIRCUIT 15-16 極 15-16 CIRCUIT 14極 14 CIRCUIT D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 2019/07/31 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:46 8 ANGULAR TOL 7 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/26 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/08/28 2017/09/26 SERIES A3-SIZE 505568 3 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY 5055680000-SD MATERIAL NUMBER CUSTOMER SEE SHEET5 2 GENERAL PSD 000 B SHEET NUMBER 3 OF 5 1 A 9 7 8 5 6 引き出し方向 引き出し方向 ⑦ REEL PULL OUT DIRECTION 4 3 ズレ 0.05 MAXIMUM. SKEW �12� 44mm幅テープ TAPE WIDTH : 44mm 1.75 ±0.1 (⌀13) D コネクタ CONNECTOR ⑥ トップテープ E カバーテープ COVER TAPE H ±1 (⌀21) TYP.(2) TOP TAPE G ±1 "Y" F R 0.75 +0.05 0 DETAIL X 16mm幅テープ TAPE WIDTH : 16mm コネクタ 中心位置 CENTER OF CONNECTOR (120°) (2) (22) (F) (⌀10) 1.5 +0.1 0 24mm幅テープ TAPE WIDTH : 24mm 28.5 ±0.1 40.5 ±0.1 E Φ380 ±2 (⌀80) 32mm幅テープ TAPE WIDTH : 32mm E 1 DETAIL X PULL OUT DIRECTION F 2 0.2 ±0.05 10 DETAIL "Y" (2) エンボスポケット中心位置 CENTER OF EMBOSSED POCKET ⌀ 1.5 +0.1 0 ⑤ キャリアテープ CARRIER TAPE D 4 ±0.1 累積ピッチ:40±0.2 ACCUMULATIVE PITCH 注記　NOTE 7. 梱包数量： 1200個／リール NUMBER OF CONNECTORS : 1200 PCS/REEL. 8. リードテープ長さ LEAD TAPE LENGTH. C C 100 MINIMUM 引き出し方向 トップテープ接着部(空エンボス) TOP TAPE BONDED PART.(EMPTY) PULL OUT DIRECTION 末端部 (空部) COMPONENT TAIL PART SUPPLIER (EMPTY) 160 MINIMUM トップテープリーダー部 部品挿入部 TOP TAPE LEADER PART 400 MINIMUM 9. トップテープの剥離強度はIEC60286-3に準拠 TOP TAPE PEELING FORCE IS DEFINED BY IEC60286-3 10. 梱包仕様書：5055689200 PS 200 PACKAGING SPECIFICATION : 5055689200 PS 200 B 1 番号 部品 NO. PART A B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION TABLE 2 材質 MATERIAL キャリアテープ ポリスチレン(PS) CARRIER TAPE POLYSTYRENE(PS) ⑥ トップテープ TOP TAPE ポリエチレン(PE), その他 POLYETHYLENE(PE), ETC リール REEL ポリスチレン(PS) ＜リサイクル材を含む＞ POLYSTYRENE(PS)　＜RECYCLE MATERIAL CONTAINED＞ DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) ⑤ ⑦ DIMENSION UNITS 2019/07/31 7 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:46 8 ANGULAR TOL 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/26 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/08/28 2017/09/26 SERIES A3-SIZE 505568 3 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY 5055680000-SD MATERIAL NUMBER CUSTOMER SEE SHEET5 2 GENERAL PSD 000 B SHEET NUMBER 4 OF 5 1 A 10 9 5 F E 7 8 6 5 4 3 2 1 505568**7* 製品番号一覧 PRODUCT NUMBER LIST F 橙 ORANGE 緑 GREEN 青 BLUE 黄 YELLOW 赤 RED 黒 BLACK 5055681678 5055681578 5055681478 5055681378 5055681278 5055681178 5055681078 5055680978 5055680878 5055680778 5055680678 5055680578 5055680478 5055680378 5055680278 5055681676 5055681576 5055681476 5055681376 5055681276 5055681176 5055681076 5055680976 5055680876 5055680776 5055680676 5055680576 5055680476 5055680376 5055680276 5055681674 5055681574 5055681474 5055681374 5055681274 5055681174 5055681074 5055680974 5055680874 5055680774 5055680674 5055680574 5055680474 5055680374 5055680274 5055681673 5055681573 5055681473 5055681373 5055681273 5055681173 5055681073 5055680973 5055680873 5055680773 5055680673 5055680573 5055680473 5055680373 5055680273 5055681672 5055681572 5055681472 5055681372 5055681272 5055681172 5055681072 5055680972 5055680872 5055680772 5055680672 5055680572 5055680472 5055680372 5055680272 5055681671 5055681571 5055681471 5055681371 5055681271 5055681171 5055681071 5055680971 5055680871 5055680771 5055680671 5055680571 5055680471 5055680371 5055680271 発注番号 ORDER NO. D ナチュラル （ベージュ） HOUSING COLOR NATURAL (BEIGE) 5055681670 16 5055681570 15 5055681470 14 5055681370 13 5055681270 12 5055681170 11 5055681070 10 5055680970 9 5055680870 8 7 5055680770 5055680670 6 5 5055680570 4 5055680470 5055680370 3 5055680270 2 E D 極数 CIRCUIT SIZE 梱包形態：キャリアテープ梱包 PACKAGING : CARRIER TAPE AND REEL C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: REVISED GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 P1 RELEASE DATE 9 2019/07/31 ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:52:46 8 ANGULAR TOL 7 6 5 4 EC NO: 620885 DRWN: TAKAIKE CHK'D: SAKIYAMA APPR: KOMURAKAMI INITIAL REVISION: DRWN: RWATANABE01 APPR: TKANEKO THIRD ANGLE PROJECTION DRAWING 2019/06/26 2019/07/19 2019/07/31 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2017/08/28 2017/09/26 SERIES A3-SIZE 505568 3 MICRO-LOCK PLUS 1.25 W/B SINGLE ROW VERTICAL SMT PLUG ASSEMBLY 5055680000-SD MATERIAL NUMBER CUSTOMER SEE SHEET5 2 GENERAL PSD 000 B SHEET NUMBER 5 OF 5 1 A