52116-0340

Molex’s Mizu-P25™ miniature wire-to-wire connectors provide the smallest size and highest level of dustproof and waterproof protection of any similar system in the market today. The system is IP67 rated, which ensures connector integrity when submerged in up to one meter of water. Ideal for applications such as motorcycles or air conditioners that continue to pack more complicated electronics into smaller spaces, the Mizu-P25™ system provides assurance that dust or water will not interfere with signal integrity. The Mizu-P25™ family includes two sub-families: the 52213/52266 type, which is rated up to125 volts; and the 52116/52117 type, rated up to 250 volts. Both systems offer features such as integral sealing and secure positive locks. In addition, both versions provide some of the smallest mated diameters of any similar system. FEATURES AND BENEFITS Mizu-P25™ 2.50mm (.098”) Pitch Miniature Waterproof Connector Systems 50147/50148 52266/52213 125 Volts Type 50038/50039 52116/52117 250 Volts Type 50147/50148/52266/52213 Series Stabilizing bump at tip keeps terminal in place during mating Unique spring-beam design provides high pressure and small deflection for high vibration applications Raised body design provides polarization Low Voltage Type Seal stopper provides waterproof protection and low terminal insertion force One-body wire seal enables tighter spacing between terminals Inner positive lock saves space and protects latch area 50038/50039/52116/52117 Series Unique spring-beam design provides high pressure and small deflection for high vibration applications Raised body design provides polarization High Voltage Type Seal stopper provides waterproof protection Inner positive lock saves space and protects latch area SPECIFICATIONS Electrical Physical • Contact Resistance: 10 milliohms max. • Operating Temperature: -40 to +105 °C • Dielectric Withstanding Voltage: 500V AC/1 min. • Insulation Resistance: 250 Megohms min. Mizu-P25™ (125 Volts type) Crimp Terminals Image Type Part Number Packaging 50148-8000 Reel Voltage Female 50148-8100 Bag 50147-8000 Reel 50147-8100 Bag Current Wire Range 3.0A AVSS/CAVS 0.30 sq. (22 AWG) 125 Volts max. Male 4.0A Insulation Range Strip Length Material Plating Application Tooling 1.40 ~ 1.70mm 2.00 ~ 2.50mm Phosphor Bronze Tin See molex.com AVSS/CAVS 0.50 sq. (20 AWG) Crimp Housings Image Type Receptacle Plug Part Number Circuit Size Voltage Current 52213-0211 2 Black 52213-0311 3 Black 52213-0417 4 125 Volts max. Housing Material Housing Color Packaging Brown 4.0 max. Glass-filled PBT Tray Black 52266-0211 2 52266-0311 3 Black 52266-0417 4 Brown Note: Cap-fitting tool needed for final assembly of housing. Contact Molex for details. Mizu-P25™ (250 Volts type) Crimp Terminals Image Type Part Number Packaging 50039-8000 Reel 50039-8100 Bag 50038-8000 Reel 50038-8100 Bag Voltage Current Wire Range Insulation Range Strip Length Material Plating Application Tooling 250 Volts max. 3.0A AVS 0.30 sq. (20-22 AWG) 1.80 ~ 1.90mm 2.00 ~ 2.50mm Phosphor Bronze Tin See molex.com Female Male Crimp Housings Image Type Receptacle Plug Part Number Circuit Size 52117-024x 2 52117-034x 3 52117-041x 4 52116-024x 2 52116-034x 3 52116-041x 4 Voltage Current Housing Material Packaging 250 Volts max. 3.0 max. Glass-filled PBT Tray *Note: Replace x with: 0 = White color, 1 = Black color, 2 = Red color (red is available in 2 and 3 circuits only). †These 52116/52117 series have a version which accepts thinner and lighter AVSS 0.30 square wire (-0243 order number), and a two-circuit version contained in a wider four-circuit body size (-0413 order number). ‡Cap-fitting tool needed for final assembly of housing. Contact Molex for details. APPLICATION INFORMATION How the Mizu-P25™ System Works (52116/52117 Type Shown Below) Plug: Receptacle: 1 Make sure connector cap is in unlocked position Unlocked Cap Unlocked Cap 2 Insert crimped terminal into wire-end rubber seal hole and push the terminal in until you hear it click 3 Tug on the wire to confirm proper insertion of the terminal. Use “Cap Fitting Tool” to seat the cap into the plug and receptacle Cap Lock Window Cap Fitting Tool Check and confirm that you can see more than half of cap lock through cap lock window Cap Fitting Tool Cap Lock Window 4 Lock Window Match direction of lock and insert until the lock snaps in place Note: Cap-fitting tool needed for final assembly of housing. Contact Molex for details. Lock MARKETS AND APPLICATIONS Mizu-P25™ 2.50mm (.098”) Pitch Miniature Waterproof Connector Systems • Mirror harness • Lamp harness • Air conditioning system • Powered rear view mirrors 50147/50148 52266/52213 125 Volts Type 50038/50039 52116/52117 250 Volts Type • LED street lights • Vending machines • Heated toilet seat DIMENSIONAL COMPARISON 52117/52116 Series – 2 and 3 circuits 10 cents (Dime) 14.0 12.4 25.5 6.8 8.9 12.4 52213/52266 Series – 2 circuits 8.2 16.5 25.2 7.25 8.2 7.25 www.molex.com/link/product/mizup25.html Order No. 987650-5961 Rev. 2 Printed in Singapore/pdf/RS/MMC/2011.10 © 2011, Molex