52437-2572

10 9 7 8 6 5 4 3 2 1 F F 0.25 0.5 E E D D (アクチュエータが開口した状態) (WHEN ACTUATOR IS OPENED) 21.6 21.1 20.6 20.1 19.6 19.1 18.6 18.1 17.6 17.1 C K 5 金具 FITTING NAIL 1.65 B 19.6 19.1 18.6 18.1 17.6 17.1 16.6 16.1 15.6 15.1 D 15.65 15.15 14.65 14.15 13.65 13.15 12.65 12.15 11.65 11.15 C B 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 52437-3072 52437-2972 52437-2872 52437-2772 52437-2672 52437-2572 52437-2472 52437-2372 52437-2272 52437-2172 30 29 28 27 26 25 24 23 22 21 極数 EMBOSSED PACKAGE (A) C B CKT. ORDER No. オーダー番号 CONNECTOR SERIES NO. : 52437-**26 0.65 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 0.9 VIEW K 0.7 0.63 (DETAIL OF FITTING NAIL) GENERAL TOLERANCES (UNLESS SPECIFIED) ±0.2 10UNDER A 10 OVER OVER DOCUMENT STATUS 10 P1 RELEASE DATE 9 2022/09/05 30 UNDER 30 ANGULAR 05:51:50 8 SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) (金具部投影図) 2.605 FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 DIMENSION UNITS 7 6 5 ±0.25 ±0.3 ±3 ° ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC CONN. ZIF FOR SMT R/A (BOTTOM CONTACT) TIN-BISMUTH PLATING EC NO: 719890 DRWN: NARENC CHK'D: SMARUYAMA APPR: YNAITO INITIAL REVISION: DRWN: YSAKIYAMA APPR: MSASAO THIRD ANGLE PROJECTION 2022/08/23 2022/09/05 2022/09/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/01/16 2004/01/19 DRAWING SERIES A3-SIZE 52437 3 SD-52437-017 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 F SHEET NUMBER 1 OF 2 1 A 10 9 7 8 5 6 4 0.5(N+1)±0.07 0.5(N-1)±0.05 0.5±0.1 0.5(N+1)±0.07 0.5±0.1 0.5(N-1)±0.05 0.5±0.08 0.5±0.05 0.35+0.04 -0.03 (PITCH) 0.5±0.05 0.3±0.03 (PITCH) 6±0.5 4±0.5 6±0.5 E 6 補強板 (STIFFENER BOARD) 4±0.5 R0.3 0.5±0.08 補強板 (STIFFENER BOARD) F 適合錫系めっきFFC推奨寸法 適合錫系めっきFPC推奨寸法 　　　APPLICABLE FFC OF TIN PLATING RECOMMENDED DIMENSION 　　　APPLICABLE FPC OF TIN PLATING RECOMMENDED DIMENSION 仕上がり厚さ：0.3±0.05 仕上がり厚さ：0.3±0.05 THICKNESS: 0.3+0.05/-0.05 THICKNESS: 0.3+0.05/-0.05 D ±0.05 3.65 0.5(N-1) 3.65 0.8 1.85MIN. 0.55MAX. 2 1 注記NOTES 　1.使用材料 MATERIAL ハウジング：46ナイロン、ガラス充填、UL94V-0、白 HOUSING:PA46,GLASS FILLED,UL94V-0,WHITE アクチュエータ：ポリフェニレンサルフィド（PPS）、ガラス充填、UL94V-0、茶色 ACTUATOR:POLYPHENYLENE SULFIDE,GLASS FILLED,UL94V-0,BROWN ターミナル：リン青銅、ニッケル下地錫ビスマスめっき（t=0.2） TERMINAL:PHOSPHOR BRONZE,TIN BISMUTH OVER NICKEL PLATING 金具：リン青銅、ニッケル下地錫めっき（t=0.2） FITTING NAIL: PHOSPHOR BRONZE,TIN OVER NICKEL PLATING 　2.エンボステープ梱包時は、アクチュエータがロックした状態になります。 IN THE PACKAGE,ACTUATOR OF PART NO.52437-**26 SHOULD BE LOCKED. 3 ソルダーテール半田付け面のズレ量、及び金具半田付け面のズレ量は、 基準面Hに対して上方向に0.1MAXIMUM、下方向0.15MAXIMUMとする。 MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM DATUM-H. UPPER DIRECTON:0.1MAXIMUM LOWER DIRECTION:0.15 MAXIMUM 4 偶数極に適用 APPLY FOR EVEN CIRCUIT. 5 ﾊﾟﾀｰﾝ剥離止め金具 FITTING NAIL FOR PREVENTION OF PEELING OF P.W.B. PATTERN. 6 R0.3は、FPCの導体部にかからないこと R0.3 MUST NOT BE OVERLAPED TO PATTERN OF FPC. 7.ソルダーテールの平坦度は、0.1MAXIMUMとする。 SOLDER TAIL COPLANARITY IS 0.1 MAXIMUM. 8.ELV 及び RoHS 適合品 ELV AND RoHS COMPLIANT SOLDERING AREA OF FITTING NAIL E D C L (0.3) (0.3) C 金具パターンエリア F (NON-ACCUMULATIVE) 3.05 KEEPING OUT AREA OF PATTERN AND SOLDERING 0.5±0.05 (PITCH) (公差非累積) (0.3) (0.3) (ピッチ) パターンおよび 半田禁止エリア (0.2) 0.45MAX. 3 M コネクタ位置 1.1 1.25 1.25 CONNECTOR POSITION DETAIL L PATTERN B B R0.3 (0.605) BOARD THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION (FROM PATTERN EDGE) GENERAL TOLERANCES (UNLESS SPECIFIED) (DETAIL OF FITTING NAIL ON PATTERN) OVER OVER DOCUMENT STATUS 10 P1 RELEASE DATE 9 2022/09/05 30 UNDER 30 ANGULAR 05:51:50 8 ±0.2 10UNDER 10 FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) VIEW M A DIMENSION UNITS 7 6 5 ±0.25 ±0.3 ±3 ° ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC CONN. ZIF FOR SMT R/A (BOTTOM CONTACT) TIN-BISMUTH PLATING EC NO: 719890 DRWN: NARENC CHK'D: SMARUYAMA APPR: YNAITO INITIAL REVISION: DRWN: YSAKIYAMA APPR: MSASAO THIRD ANGLE PROJECTION 2022/08/23 2022/09/05 2022/09/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/01/16 2004/01/19 DRAWING SERIES A3-SIZE 52437 3 SD-52437-017 MATERIAL NUMBER PSD 001 CUSTOMER SEE SHEET 1 2 GENERAL MARKET F SHEET NUMBER 2 OF 2 1 A 10 9 8 7 6 5 4 3 2 1 F F 　 　　　 　　 E E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) GENERAL TOLERANCES (UNLESS SPECIFIED) ±0.2 10UNDER A 10 OVER OVER DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 10 P1 RELEASE DATE 9 2022/09/05 30 ANGULAR 05:51:50 8 30 UNDER 7 6 5 ±0.25 ±0.3 ±3 ° ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC CONN ZIF SMT RA EMBSTP PKG -LEAD FREE- EC NO: 719890 DRWN: NARENC CHK'D: SMARUYAMA APPR: YNAITO INITIAL REVISION: DRWN: YSAKIYAMA APPR: MSASAO THIRD ANGLE PROJECTION 2022/08/23 2022/09/05 2022/09/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/01/16 2004/01/19 DRAWING SERIES A3-SIZE 52437 3 SD-52437-018 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 B SHEET NUMBER 1 OF 3 1 A 10 9 8 7 6 5 4 3 2 1 F F E E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) GENERAL TOLERANCES (UNLESS SPECIFIED) ±0.2 10UNDER A 10 OVER OVER DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 10 P1 RELEASE DATE 9 2022/09/05 30 ANGULAR 05:51:50 8 30 UNDER 7 6 5 ±0.25 ±0.3 ±3 ° ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC CONN ZIF SMT RA EMBSTP PKG -LEAD FREE- EC NO: 719890 DRWN: NARENC CHK'D: SMARUYAMA APPR: YNAITO INITIAL REVISION: DRWN: YSAKIYAMA APPR: MSASAO THIRD ANGLE PROJECTION 2022/08/23 2022/09/05 2022/09/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/01/16 2004/01/19 DRAWING SERIES A3-SIZE 52437 3 SD-52437-018 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 B SHEET NUMBER 2 OF 3 1 A 10 9 8 7 6 5 4 3 2 1 F F E E D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) GENERAL TOLERANCES (UNLESS SPECIFIED) ±0.2 10UNDER A 10 OVER OVER DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 10 P1 RELEASE DATE 9 2022/09/05 30 ANGULAR 05:51:50 8 30 UNDER 7 6 5 ±0.25 ±0.3 ±3 ° ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 0.5 FPC CONN ZIF SMT RA EMBSTP PKG -LEAD FREE- EC NO: 719890 DRWN: NARENC CHK'D: SMARUYAMA APPR: YNAITO INITIAL REVISION: DRWN: YSAKIYAMA APPR: MSASAO THIRD ANGLE PROJECTION 2022/08/23 2022/09/05 2022/09/05 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2004/01/16 2004/01/19 DRAWING SERIES A3-SIZE 52437 3 SD-52437-018 MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 B SHEET NUMBER 3 OF 3 1 A