52892-1096

9 7 8 5 6 4 3 2 1 NOTE E E ⌀3302 (⌀80) 1.製品詳細寸法については図面 528921001 PSD 000 を参照下さい. RE DETAILED DIMENSION, SEE DOC. NO. 528921001 PSD 000. 2.梱包数量：1000個/リール NUMBER OF CONNECTORS : 1000 PCS/REEL 3.リードテープ長さ　LEAD TAPE LENGTH D D G E1 F1 3.トップテープの剥離強度：IEC60286-3. PEELING OFF FORTH OF TOP TAPE : REFER TO IEC60286-3. 4.材料　MATERIAL キャリアテープ：ポリプロピレン トップテープ：PET, PE, PEF リール：ポリスチレン (PS) ＜リサイクル材を含む＞ CARRIER TAPE : POLYPROPYLENE TOP TAPE : PET, PE, PEF REEL : POLYSTYRENE (PS) ＜RECYCLE MATERIAL CONTAINED＞ 5.本製品は52892-**95の金めっき品である。 THIS PRODUCT IS GOLD PLATING OF 52892-**95. C DETAIL G C B B MODEL NO. 52892-**96 2016/12/14 2016/12/15 2016/12/20 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) RELEASED RELEASE STATUS FORMAT: tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 20.12.2016 8 A 00:53:43 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A 111407 YMIZUNO02 YKOBAYASHI02 TKUSUHARA01 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM --- DRWN BY DATE 2016/12/14 YMIZUNO02 DATE CHK'D BY 2016/12/15 YKOBAYASHI02 APPR BY A DATE TKUSUHARA01 DRAWING SIZE 0.5 FFC/FPC ZIF SMT HSGASSY EMBSTPPKG 2016/12/20 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 52892 SEE SHEET 2 DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 528920001 3 CUSTOMER 2 PSD 1 OF 2 000 1 9 7 8 6 5 4 3 2 1 E E 52892-**59 52892-**59 D D C C 32 24 B キャリアテープ幅 CARRIE TAPE WIDTH 37.4 33.4 18.6 16.6 14.6 29.4 25.4 14.1 11.6 10.6 16.9 14.9 12.9 12.4 9.9 8.9 13.1 11.1 9.1 8.6 6.1 5.1 E (C) (B) F (D) 52892-2496 24 52892-2096 20 52892-1696 16 52892-1596 15 B 52892-1096 10 52892-0896 8 MATERIAL NO. CKT (A) CONNECTOR MODEL NO. 52892-**96 12.9 10.9 8.9 8.4 5.9 4.9 52892-2459 52892-2059 52892-1659 52892-1559 52892-1059 52892-0859 2016/12/14 2016/12/15 2016/12/20 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) RELEASED RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 9 P1 RELEASE DATE 20.12.2016 8 A 00:53:43 7 6 5 REV EC NO: DRWN: CHK'D: APPR: A 111407 YMIZUNO02 YKOBAYASHI02 TKUSUHARA01 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM --- DRWN BY DATE 2016/12/14 YMIZUNO02 DATE CHK'D BY 2016/12/15 YKOBAYASHI02 APPR BY A DATE TKUSUHARA01 DRAWING SIZE 0.5 FFC/FPC ZIF SMT HSGASSY EMBSTPPKG 2016/12/20 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 52892 SEE CHART DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 528920001 3 CUSTOMER 2 PSD 2 OF 2 000 1 9 7 8 6 5 4 3 2 1 注記 NOTES 1.材質　MATERIAL ハウジング：46ナイロン、ガラス充填、UL94V-0、ナチュラル(白色) HOUSING : 46NYLON, GLASS FILLED, UL94V-0, NATURAL(WHITE) アクチュエータ：PPS、ナチュラル(茶色)、ガラス充填、UL94V-0 ACTUAOR : PPS, NATURAL(BROWN), GLASS FILLED, UL94V-0 ターミナル：リン青銅 (t=0.2) TERMINAL : PHOSPHOR BRONZE (t=0.2) めっき　PLATING 接点部：金めっき (0.1μm以上) テール部：金めっき (0.03μm以上) ニッケル下地 (1.5μm以上) CONTACT : GOLD PLATING (0.1 MICROMETER MINIMUM) TAIL : GOLD PLATING (0.03 MICROMETER MINIMUM) OVER NICKEL PLATING (1.5 MICROMETER MINIMUM) 金具：リン青銅 (t=0.2) FITTING NAIL : PHOSPHOR BRONZE (t=0.2) めっき　PLATING 錫めっき (1.0μm以上) ニッケル下地 (1.0μm以上) CONTACT : GOLD PLATING (1.0 MICROMETER MINIMUM) OVER NICKEL PLATING (1.0 MICROMETER MINIMUM) 2 パターンはくり止め用金具 FITTING NAIL FOR PREVENTION OF PEELING OF PCB PATTERN. 3 ソルダーテール半田付け面のズレ量、及び金具半田付け面のズレ量は、 E D E D 基準面 Y に対し上方向0.05MAX.、下方向0.2MAX.とする。 MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM Y UPPER DIREVTION : 0.05 MAX. , LOWER DIRECTION : 0.2 MAX. 偶数極に適用。 4 APPLY FOR EVEN CIRCUIT. 5.テール及びネイルの平坦度は、0.1 MAX. TAIL AND NAIL COPLANARITY TO BE 0.1 MAX. 6.本製品は52892シリーズの金めっき品である。 THIS PRODUCT IS GOLD PLATING OF 52892 SERIES. 7.ELV及びRoHS適合品. ELV AND RoHS COMPLIANT. C B 16.6 14.6 12.6 12.1 9.6 8.6 12.5 10.5 8.5 8.0 5.5 4.5 11.57 9.57 7.57 7.07 4.57 3.57 D C B C 11.5 9.5 7.5 7.0 4.5 3.5 52892-2496 52892-2459 24 52892-2096 52892-2059 20 52892-1696 52892-1659 16 52892-1596 52892-1559 15 B 52892-1096 52892-1059 10 52892-0896 52892-0859 8 EMBOSSED TAPE MATERIAL NO. CKT (A) ORDER NO. MODEL NO. 52892-**59 2016/12/14 2016/12/15 2016/12/20 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION GENERAL TOLERANCES (UNLESS SPECIFIED) 9 P1 RELEASE DATE 20.12.2016 8 00:53:48 7 6 5 A REV RELEASED RELEASE STATUS FORMAT: tb-prod-A3 REVISION: G DATE: 2015/12/14 GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER ± 0.2 10 OVER 30 UNDER ± 0.25 ± 0.3 30 OVER EC NO: DRWN: CHK'D: APPR: A 111407 YMIZUNO02 YKOBAYASHI02 TKUSUHARA01 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM --- DRWN BY DATE 2016/12/14 YMIZUNO02 2016/12/15 YKOBAYASHI02 APPR BY A DATE TKUSUHARA01 DRAWING SIZE 0.5 FFC/FPC ZIF HSG ASSY DATE CHK'D BY 2016/12/20 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 52892 SEE CHART DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 528921001 3 CUSTOMER 2 PSD 1 OF 2 000 1 9 7 8 5 6 4 3 2 1 0.3 ±0.05 E めっき：金めっき(0.2μm) 　　　　下地ニッケル(1-5μm) PLATING : GOLD(0.2μm) NICKEL UNDER(1-5μm) 仕上がり厚さ THICKNESS D 補強板:ポリイミド REINFORCE BOARD : POLYIMIDE 熱硬化接着剤 THERMOSETTING ADHESIVE ベースフィルム:ポリイミド(25μm) BASE FILM : POLYIMIDE(25μm) 熱硬化接着剤 THERMOSETTING ADHESIVE 導体部:銅箔(35μm) COPPER FOIL (35μm) 熱硬化接着剤 THERMOSETTING ADHESIVE カバーレイ:ポリイミド(25μm) COVER FILM : POLYIMIDE(25μm) D C ±0.05 ±0.05 ±0.05 ±0.05 R0.3はFPCの導体部にかからないこと. R0.3 MUST NOT BE OVERLAPPED TO PATTERN OF FPC. 2.FPCについて ABOUT FPC : 打ち抜き方向は導体側から補強板側を推奨します。 導体部については軟箔銅35μmまたは50μmを推奨します。 補強フィルム材質はポリイミドを推奨します。ベースフィルムは25μmを推奨します。 接着剤は熱硬化接着剤を推奨します。 尚、接着剤の接点部への付着は導通不良の原因になりますので、染み出しが無い様、お願い致します。 RECOMMENDED PUNCHING DIRECTION : FROM CONDUCTOR SIDE TO STIFFENER SIDE RECOMMENDED CONDUCTOR SPEC : SOFT COPPER FOIL RECOMMENDED CONDUCTOR THICKNESS : 35 MICROMETER OR 50 MICROMETER RECOMMENDED STIFFENER MATERIAL : POLYIMIDE RECOMMENDED BASE FILM THICKNESS : 25 MICROMETER RECOMMENDED ADHESIVE : THERMOSETTING ADHESIVE NOTE : PLEASE PUT APPROPRIATE AMOUT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE CAUSES THE DEFECT IN ELECTRICAL CONTINUITY. 1 9 P1 RELEASE DATE 20.12.2016 8 2016/12/14 2016/12/15 2016/12/20 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 7 6 RELEASED 5 111407 YMIZUNO02 YKOBAYASHI02 TKUSUHARA01 GENERAL TOLERANCES (UNLESS SPECIFIED) 10 UNDER ± 0.2 10 OVER 30 UNDER ± 0.25 ± 0.3 30 OVER 00:53:48 GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° A REV RELEASE STATUS FORMAT: master-tb-prod-A3 REVISION: G DATE: 2015/12/14 B EC NO: DRWN: CHK'D: APPR: A C FPC構成推奨仕様 STRUCTURE OF FPC 注記 NOTES B E 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 DIMENSION UNITS SCALE MM --- DRWN BY DATE 2016/12/14 YMIZUNO02 2016/12/15 YKOBAYASHI02 APPR BY A DATE TKUSUHARA01 DRAWING SIZE 0.5 FFC/FPC ZIF HSG ASSY DATE CHK'D BY 2016/12/20 THIRD ANGLE PROJECTION A3 PRODUCT CUSTOMER DRAWING SERIES MATERIAL NUMBER 52892 SEE CHART DOCUMENT NUMBER GENERAL DOC TYPE DOC PART SHEET NUMBER 528921001 3 CUSTOMER 2 PSD 2 OF 2 000 1