53261-0371

14 13 12 10 11 ⌖ 0.4 X Y 9 7 8 5 6 X E 0.9 B OF PIN TIP 3 2 1 NOTES POSITION TOLERANCE H 4 材料およびめっき仕様 : TABLE 1 参照 MATERIAL AND PLATING : REFER TO TABLE 1 1 0.6 1.25 Y H 適用製品及び各種仕様書はSHEET 5を参照のこと REFER TO SHEET 5 ABOUT APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 2 �PITCH� 1 G PACKAGING INFOMATION : SEE SHEET 3 2.4 0.725 3. 梱包形態 : SHEET 3 参照 4. テールおよびネイルのズレは基準面 V に対しA方向に0.05 MAX、B方向に0.1 MAX V MISALIGNMENT OF TAILS AND NAILS FROM V , D 方向A DIRECTION A C 方向B DIRECTION B 5. 端子テール部およびネイルの平坦度は0.1以下 A ±0.4 COPLANARITY OF TAIL AND NAIL TO BE 0.1 MAX 3.4 2 W CIRCUIT N 6. 本製品は錫めっき品です。金めっき品は532610000-SD 000をご参照ください 0.6 CIRCUIT 1 THIS PRODUCT IS TIN PLATING TYPE. PLEASE REFER TO 532610000-SD FOR GOLD PLATING TYPE. ロックの数は、2,3極は1ロック、 4極以上は2ロック。 LOCKING WINDOW: ONE PLACE FOR 2 AND 3 CIRCUIT, AND TWO PLACES FOR MORE THAN 4 CIRCUIT. 7 W E B 1.25 1.0 ±0.4 0.32 ±0.05 1.5 PITCH 0.5 ±0.1 �3� (1.25N+1.95) 3.2 +0.20 -0.05 SECTION W-W 21.8 19.3 18.05 16.8 15.55 14.3 13.05 11.8 10.55 9.3 8.05 6.8 5.55 4.3 3.05 CIRCUIT No.1 MARK POSITION D 1.48 1.7 ±0.3 1 B ① TABLE1 部品 PART 番号 NO. 0.25 ±0.05 3 C ネイル NAIL C DIMENSION UNITS SCALE mm NTS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 りん青銅 PHOSPHOR BRONZE 3 PLACES ± 0.2 2 PLACES ± 0.2 無光沢錫めっき 1.0 MICROMETER MINIMUM MATTE TIN PLATING 1.0 MICROMETER MINIMUM 1 PLACE ± 0.2 0 PLACES ± 0.2 DOCUMENT STATUS P1 13 RELEASE DATE 12 2022/08/26 26.4 23.9 22.65 21.4 20.15 18.9 17.65 16.4 15.15 13.9 12.65 5 11.4 3.75 10.15 2.5 8.9 1.25 7.65 B 17 15 14 13 12 11 10 --- 532611771 --- 532611571 532611427 532611471 --- 532611371 532611227 532611271 --- 532611171 --- 532611071 532610927 532610971 532610827 532610871 532610727 532610771 532610627 532610671 532610527 532610571 532610427 532610471 532610327 532610371 --- 532610271 色：黒 COLOUR: BLACK 色：ナチュラル(ベージュ) COLOUR: NATURAL (BEIGE) 11 A D 9 8 7 6 5 4 3 2 C 極数 CIRCUIT SIZE 発注番号 ORDER NO B CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ニッケルめっき 1.0 MICROMETER MINIMUM NICKEL PLATING 1.0 MICROMETER MINIMUM FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 D 20 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION ターミナル 無光沢錫めっき 1.0 MICROMETER MINIMUM TERMINAL MATTE TIN PLATING 1.0 MICROMETER MINIMUM ③ 26 23.5 22.25 21 19.75 18.5 17.25 16 14.75 13.5 12.25 8 11 6.75 9.75 5.5 8.5 4.25 7.25 梱包形態 : エンボス梱包 PACKAGING : EMBOSSED TAPE AND REEL ハウジング ポリアミド(PA), UL94V-0, GLASS-FILLED, 色: 表参照 HOUSING POLYAMIDE(PA), UL94V-0, GLASS-FILLED, COLOUR: SEE CHART ニッケルめっき 1.0 MICROMETER MINIMUM NICKEL PLATING 1.0 MICROMETER MINIMUM A 23 20.5 19.25 18 16.75 15.5 14.25 13 11.75 10.5 9.25 E 材質 MATERIAL りん青銅 PHOSPHOR BRONZE ② 4極以上ロック形状 (2ロック) FIGURE OF MORE THAN 4 CIRCUIT (2 LOCKS) 7 3.4 (1.25N+1.75) TRADE MARK POSITION E 2, 3極形状 (1ロック) FIGURE OF 2, 3 CIRCUIT (1 LOCK) 7 C 0.2 ±0.15 1.375 Z (1.25N+0.25) F 0.4 0.4 4.2 �3.8� �1.0� �2.2� F ⌖ 0.5 Z G DIRECTION A: 0.05 MAX, DIRECTION B: 0.1 MAX 10:43:05 11 EC NO: 719210 DRWN: SSATO02 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: QHE31 APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 5 PICOBLADE 1.25 SMT RIGHT ANGLE TIN PLATING TYPE 2022/08/17 2022/08/26 2022/08/26 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/12/15 2021/12/24 DRAWING SERIES A2-SIZE 53261 4 532610001-SD MATERIAL NUMBER SEE CHART 3 PSD 000 D SHEET NUMBER CUSTOMER GENERAL 2 1 OF 5 1 A 14 13 12 10 11 9 8 7 5 6 4 3 2 1 NOTES H 8 H 製品輪郭線からパッドまでの寸法を示す。 DIMENSIONS FROM CONNECTOR OUTLINE TO PAD G G コネクタ外形 2.1 ±0.1 CONNECTOR OUTLINE TYP (2) �0.4� F �0.8� 1.25 ±0.1 �1.6� (0.6 MIN) CIRCUIT 1 CIRCUIT N 0.6 ±0.1 TYP (2) (PITCH) 公差非累積 E 8 LENGTH E PATTERN 1.6 MIN 8 3 ±0.1 TYP (2) F 8 NON-ACCUMILATIVE 3.6 ±0.1 3.6 ±0.1 B ±0.1 推奨基板レイアウト (実装面側) RECOMMENDED PCB LAYOUT : COMPONENT SIDE (参考：基板厚 1.0mm, メタルマスク厚さ: 0.15mm, マスク開口率:100%) (REFERENCE：PCB THICKNESS 1.0mm, STENCIL THICKNESS: 0.15mm, APERTURE:100%) D D 嵌合相手 : 51021 シリーズ MATE WITH : 51021 SERIES � E� C �5.2� �1.0� �3.4� �D� 21.8 19.3 18.05 16.8 15.55 14.3 13.05 11.8 10.55 9.3 8.05 6.8 5.55 4.3 3.05 23 20.5 19.25 18 16.75 15.5 14.25 13 11.75 10.5 9.25 E D B 26 23.5 22.25 21 19.75 18.5 17.25 16 14.75 13.5 12.25 8 11 6.75 9.75 5.5 8.5 4.25 7.25 C 20 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 26.4 23.9 22.65 21.4 20.15 18.9 17.65 16.4 15.15 13.9 12.65 5 11.4 3.75 10.15 2.5 8.9 1.25 7.65 B 17 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C 極数 CIRCUIT SIZE B A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION A DOCUMENT STATUS P1 13 RELEASE DATE 12 2022/08/26 10:43:05 11 SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 嵌合図 MATED CONNECTOR FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 DIMENSION UNITS ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 719210 DRWN: SSATO02 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: QHE31 APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 5 PICOBLADE 1.25 SMT RIGHT ANGLE TIN PLATING TYPE 2022/08/17 2022/08/26 2022/08/26 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/12/15 2021/12/24 DRAWING SERIES A2-SIZE 53261 4 532610001-SD MATERIAL NUMBER SEE CHART 3 PSD 000 D SHEET NUMBER CUSTOMER GENERAL 2 2 OF 5 1 A 14 13 12 10 11 7 8 5 6 4 11 9. 梱包数量: 1000個/リール NUMBER OF CONNECTOR: 1000PCS/REEL (⌀80) 22 0°� ⌀330 ±2 �12 175 ±25 引き出し方向 PULL OUT DIRECTION 25 ±5 リーダー部 （空部） LEADER PART (EMPTY) U 部品挿入部 COMPONENT SUPPLIER 120 ±20 (⌀13) 末端部 （空部） TAIL PART (EMPTY) 14. 15. 150 ±40 L ±1 16. M ±1 12 (2.8) CIRCUIT 1 吸着ノズル中心位置 VACUUM PENCIL CENTER LOCATION (0.8) (3.7) 1.75 ±0.1 4.7 ±0.3 ④ ⑤ ⑥ (4.6) CIRCUIT N 0.5 ±0.05 T T 12 ±0.1 PITCH ⌀ 1.5 +0.1 0 4 ±0.1 F 部品 PART キャリアテープ ポリプロピレン(PP) CARRIER TAPE POLYPROPYLENE(PP) トップテープ TOP TAPE リール REEL ピッチ累積公差 D 21.2 49.4 45.4 40.4 18.7 20.2 17.45 1.5 +0.1 0 �2.8� (4.6) 吸着ノズル中心位置 1.75 ±0.1 VACUUM PENCIL CENTER LOCATION ⌀ 1.5 +0.1 0 4.9 ±0.3 4.0 ±0.1 ピッチ累積公差 ACCUMULATIVE PITCH 40±0.2 R M SECTION: R-R �2� 12 ±0.1 PITCH 40±0.2 A 32mm幅(11~13極用)および44mm幅(14~15, 17極用)キャリアテープ 32mm (FOR 11~13 CIRCUIT) OR 44mm (FOR 14~15, 17 CIRCUIT) WIDTH CARRIER TAPE DOCUMENT STATUS P1 13 FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 RELEASE DATE 12 2022/08/26 10:43:05 11 DIMENSION UNITS SCALE 9 J H 24 16 キャリアテープ幅 G CARRIER TAPE WIDTH G C 極数 CIRCUIT SIZE B F mm NTS CURRENT REV DESC: ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 719210 DRWN: SSATO02 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: QHE31 APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 K 32 GENERAL TOLERANCES (UNLESS SPECIFIED) CIRCUIT N R L 22 20.75 19.5 18.25 17 15.75 14.5 13.25 12 10.75 9.5 8.25 17 15 14 13 12 11 10 9 8 7 6 5 4 3 2 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION (0.6) (H) (3.7) K ±0.1 CARRIER TAPE WIDTH G ±0.3 (F) (J) (0.8) 27 24.5 23.25 42 16.2 37.4 33.4 28.4 14.95 14.2 13.7 12.45 11.2 9.95 29.4 25.4 8.7 11.5 7.45 6.2 4.95 3.7 7.5 21.4 17.4 2.45 �2� CIRCUIT 1 0.6 ±0.05 E 40±0.2 C B ポリスチレン(PS)＜リサイクル材を含む＞ POLYSTYRENE(PS)＜RECYCLE MATERIAL CONTAINED＞ 40±0.2 0.2 +0.15 -0.05 引き出し方向 PULL OUT DIRECTION 13 ポリエチレン (PE)、その他 POLYETHYLENE (PE), ETC SECTION: T-T 16mm幅(2~3極用)および24mm幅(4~10極用)キャリアテープ 16mm (FOR 2~3 CIRCUIT) OR 24mm (FOR 4~10 CIRCUIT) WIDTH CARRIER TAPE �6� 材質 MATERIAL (2) ACCUMULATIVE PITCH D G TABLE2 番号 NO. CONNECTOR (0.5) 4 �2� (H) CARRIER TAPE WIDTH G ±0.3 (F) (J) E 引き出し方向 PULL OUT DIRECTION 13 (6) 材料: TABLE 2参照 MATERIAL: REFER TO TABLE 2 コネクタハウジング平面部 CONNECTOR HOUSING FLAT AREA. トップテープの剥離強度はIEC 60286-3に準拠。 TOP TAPE PEELING FORCE IS DEFINED BY IEC 60286-3. 本製品は乾燥剤入りハイバリア梱包仕様である。 THIS PRODUCT IS HIGH BARRIER PACKAGE WITH DESICCANT. 梱包仕様書：SPK-53261-002 PACKAGING SPECIFICATION: SPK-53261-002 F 5 H 極数 CIRCUIT 12 (⌀21) DETAIL U 1 発注番号 ORDER NUMBER トップテープ未装着部 TOP TAPE NON-BONDED PART トップテープリーダー部 TOP TAPE LEADER PART 13 G 2 53261**** 10. リードテープ長さ LEAD TAPE LENGTH (⌀10) (2) 3 注釈　NOTE 6 引き出し方向 PULL OUT DIRECTION H 9 8 7 6 5 PICOBLADE 1.25 SMT RIGHT ANGLE TIN PLATING TYPE 2022/08/17 2022/08/26 2022/08/26 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/12/15 2021/12/24 DRAWING SERIES A2-SIZE 53261 4 532610001-SD MATERIAL NUMBER SEE CHART 3 PSD 000 D SHEET NUMBER CUSTOMER GENERAL 2 3 OF 5 1 A 14 13 12 10 11 9 7 8 5 6 4 3 2 1 532611071 韓国生産分に適用 APPLIES TO PRODUCT PRODUCED BY MXK H H 引き出し方向 PULL OUT DIRECTION (⌀10) G �12 (⌀80) 22 0°� (2) ⌀330 ±2 G (⌀21) DETAIL U U F (⌀13) F L ±1 M ±1 13 �2� 引き出し方向 E 1.5 +0.1 0 PULL OUT DIRECTION 0.2 +0.15 -0.05 E (4.6) (0.8) (3.7) 吸着ノズル中心位置 (0.6) (H) K ±0.1 G ±0.3 D (F) (J) CIRCUIT 1 D SECTION: P-P VACUUM PENCIL CENTER LOCATION 1.75 ±0.1 0.6 ±0.05 4.9 ±0.3 C 4 ±0.1 CIRCUIT N ⌀ 1.5 +0.1 0 P P �2� 12 ±0.1 ピッチ累積公差 40±0.2 ACCUMULATIVE PITCH C PITCH 40±0.2 32mm幅キャリアテープ 32mm WIDTH CARRIER TAPE 32 18.25 10 キャリアテープ幅 G CARRIER TAPE WIDTH G F 極数 CIRCUIT SIZE 37.4 33.4 28.4 12.45 14.2 M L K J H B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS P1 13 FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 RELEASE DATE 12 2022/08/26 10:43:05 11 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 719210 DRWN: SSATO02 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: QHE31 APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 5 PICOBLADE 1.25 SMT RIGHT ANGLE TIN PLATING TYPE 2022/08/17 2022/08/26 2022/08/26 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/12/15 2021/12/24 DRAWING SERIES A2-SIZE 53261 4 532610001-SD MATERIAL NUMBER SEE CHART 3 PSD 000 D SHEET NUMBER CUSTOMER GENERAL 2 4 OF 5 1 A 14 13 12 10 11 9 7 8 5 6 4 3 2 1 H H 2 G 適合製品及び各種仕様書 APPLICABLE PRODUCTS AND SPECIFICATIONS PART NUMBER 53261**71 / 53261**27 梱包仕様書 PACKING SPECIFICATION PART NUMBER 適合ハウジング APPLICABLE HOUSING 51021**00 TIN PLATING F 適合圧着端子 APPLICABLE TERMINAL G SPECIFICATION NUMBER SPK-53261-002 F PART NUMBER 500798*00 500588*00 500798001 500588001 WIRE SIZE (AWG) #26-28 #28-32 #26-28 #28-32 製品仕様書 PRODUCT SPECIFICATION 510211124-PS PS 000 PS-51021-024 PS 001 E E アプリケーション仕様書 (取扱説明書) APPLICATION SPECIFICATION 510210000-AS PS 000 D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS P1 13 FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 RELEASE DATE 12 2022/08/26 10:43:05 11 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 719210 DRWN: SSATO02 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: QHE31 APPR: KOMURAKAMI THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 5 PICOBLADE 1.25 SMT RIGHT ANGLE TIN PLATING TYPE 2022/08/17 2022/08/26 2022/08/26 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2021/12/15 2021/12/24 DRAWING SERIES A2-SIZE 53261 4 532610001-SD MATERIAL NUMBER SEE CHART 3 PSD 000 D SHEET NUMBER CUSTOMER GENERAL 2 5 OF 5 1 A