53398-0571

14 13 12 10 11 1.48 G 5 6 1 材料および仕上げ（めっき仕様） : TABLE 1参照 MATERIAL AND FINISHES : SEE TABLE 1 2 適用製品及び各種仕様書はSHEET 5を参照のこと REFER TO SHEET 5 ABOUT APPLICABLE PRODUCTS AND VARIOUS SPECIFICATIONS 0.625 5 TRADE MARK 1.25 (PIN TIP) �0.6� PITCH 1 水平面上においてのハウジング底面 W とソルダーテール及びネイル底面とのズレ量を示す。 偶数極のみに適用 APPLY TO EVEN CIRCUIT PRODUCTS. F ロックの数は、2,3極は1ロック、4極以上は2ロック。 LOCKING WINDOW: ONE PLACE FOR 2 AND 3 CIRCUIT, AND TWO PLACES FOR MORE THAN 4 CIRCUIT. 8. 本製品は錫めっき品です。金めっき品は533980002-SDをご参照ください THIS PRODUCT IS TIN PLATING TYPE. PLEASE REFER TO 533980002-SD FOR GOLD PLATING TYPE 4.7 0.1 +0.10 -0.05 0.45 ±0.05 W CIRCUIT 1 0.32 ±0.05 ⌖ 0.5 X CIRCUIT N 7 3.7 4 0.725 E G 6. 端子テール部およびネイルの平坦度は0.1以下 COPLANARITY OF TAIL AND NAIL TO BE 0.1 MAX. Y 0.5 MX◻ �2.2� (PIN TIP) 5 2.4 F CIRCUIT No.1 INDICATIOR MARK 0.4 ±0.1 (PIN TIP) �0.9� 1 MISALIGNMENT OF SOLDER TAIL AND NAIL FROM W X �B� 2 3. 梱包形態 : SHEET 3 参照 PACKAGING INFOMATION : SEE SHEET 3 4 ⌖ 0.4 X Y 3 NOTES 1.1 E 4 H 1.45 1.15 H 7 8 0.25 ±0.05 1.7 ±0.3 9 E (TAIL) 5 0.625 1.25 (TAIL) PITCH (TAIL) 0.6 ±0.1 C 0.1 ±0.05 �B� D D SECTION Z-Z C D Z 2 C 4~15極形状 (2ロック) FIGURE OF 4-15 CIRCUIT (2 LOCKS) 2, 3極形状 (1ロック) FIGURE OF 2, 3 CIRCUIT (1 LOCK) 7 1 1 Z 3 B 番号 NO. ① A ±0.4 部品 PART ハウジング ポリアミド(PA), UL94V-0, GLASS-FILLED, 色: 表参照 HOUSING POLYAMIDE(PA), UL94V-0, GLASS-FILLED, COLOR: SEE CHART DOCUMENT STATUS P1 14 13 FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 RELEASE DATE 12 2022/06/03 11:50:50 11 10 ネイル NAIL 9 無光沢錫めっき 1.0 MICROMETER MINIMUM MATTE TIN PLATING 1.0 MICROMETER MINIMUM 下地めっき UNDER PLATING ニッケルめっき 1.0 MICROMETER MINIMUM NICKEL PLATING 1.0 MICROMETER MINIMUM 母材 MATERIAL りん青銅 PHOSPHOR BRONZE テール部 TAIL AREA 無光沢錫めっき 1.0 MICROMETER MINIMUM MATTE TIN PLATING 1.0 MICROMETER MINIMUM 下地めっき UNDER PLATING ニッケルめっき 1.0 MICROMETER MINIMUM NICKEL PLATING 1.0 MICROMETER MINIMUM 8 7 19.3 18.05 16.8 15.55 14.3 13.05 11.8 10.55 9.3 8.05 6.8 5.55 4.3 3.05 20.5 19.25 18 16.75 15.5 14.25 13 11.75 10.5 9.25 8 6.75 5.5 4.25 23.5 22.25 21 19.75 18.5 17.25 16 14.75 13.5 12.25 11 9.75 8.5 7.25 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 3.75 2.5 1.25 23.9 22.65 21.4 20.15 18.9 17.65 16.4 15.15 13.9 12.65 11.4 10.15 8.9 7.65 F E D C B A 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C 極数 CIRCUIT SIZE B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION りん青銅 PHOSPHOR BRONZE コンタクト部 ターミナル CONTACT AREA TERMINAL テール部 TAIL AREA A ③ TABLE 1 材質 MATERIAL 母材 MATERIAL ② 7 18.6 17.35 16.1 14.85 13.6 12.35 11.1 9.85 8.6 7.35 6.1 4.85 3.6 2.35 6 DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 706542 DRWN: QHE31 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: SOBARA01 APPR: AIDA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 PICOBLADE 1.25 SMT VERTICAL TIN PLATING TYPE 2022/05/02 2022/06/03 2022/06/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/04 2019/10/30 DRAWING SERIES A2-SIZE 53398 4 533980000-SD MATERIAL NUMBER SEE CHART 3 PSD 000 C SHEET NUMBER CUSTOMER GENERAL 2 1 OF 5 1 A 14 13 12 10 11 9 8 7 5 6 4 3 2 1 NOTES 2.175 MX◻ H 1 G H 9 製品輪郭線からパッドまでの寸法を示す。 DIMENSIONS FROM CONNECTOR OUTLINE TO PAD 10 製品の基板実装部以外の金属露出部と基板パターンとの干渉、 および製品と基板上の突起物との干渉が生じないようご配慮をお願いいたします。 PLEASE TAKE CARE NOT TO CAUSE INTERFERENCE BETWEEN EXPOSED METAL PARTS EXCLUDING MOUNTING PORTION OF PRODUCT AND PCB PATTERN, AND INTERFERENCE BETWEEN PRODUCT AND PROTRUSIONS ON PCB. G F 吸着面 VACUUM AREA F 製品輪郭線 CONNECTOR OUTLINE 2.1 ±0.1 �0.4� F 9 9 �1.6� 3 ±0.1 TYP (2) TYP (2) E �0.3� 1.25 ±0.1 PITCH 0.8 ±0.1 9 0.6 ±0.1 TYP (2) 1.3 E 公差非累積 NON-ACCUMILATIVE CIRCUIT 1 CIRCUIT N 3.6 ±0.1 D 3.6 ±0.1 B ±0.1 D 推奨基板レイアウト (実装面側) RECOMMENDED PCB LAYOUT : COMPONENT SIDE (参考：基板厚 1.0 MILLIMETER, メタルマスク厚さ: 0.15 MILLIMETER, マスク開口率:100%) (REFERENCE：PCB THICKNESS 1.0 MILLIMETER, STENCIL THICKNESS: 0.15 MILLIMETER, APERTURE:100%) 10 C �A� �C� �0.5� �3.7� �5.75� 嵌合相手 : 51021 シリーズ MATE WITH : 51021 SERIES B 18.6 17.35 16.1 14.85 13.6 12.35 11.1 9.85 8.6 7.35 6.1 4.85 3.6 2.35 19.3 18.05 16.8 15.55 14.3 13.05 11.8 10.55 9.3 8.05 6.8 5.55 4.3 3.05 20.5 19.25 18 16.75 15.5 14.25 13 11.75 10.5 9.25 8 6.75 5.5 4.25 23.5 22.25 21 19.75 18.5 17.25 16 14.75 13.5 12.25 11 9.75 8.5 7.25 17.5 16.25 15 13.75 12.5 11.25 10 8.75 7.5 6.25 5 3.75 2.5 1.25 23.9 22.65 21.4 20.15 18.9 17.65 16.4 15.15 13.9 12.65 11.4 10.15 8.9 7.65 F E D C B A 15 14 13 12 11 10 9 8 7 6 5 4 3 2 C 極数 CIRCUIT SIZE B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) 嵌合図 MATED CONNECTORS A DOCUMENT STATUS P1 14 13 FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 RELEASE DATE 12 2022/06/03 11:50:50 11 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 706542 DRWN: QHE31 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: SOBARA01 APPR: AIDA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 5 PICOBLADE 1.25 SMT VERTICAL TIN PLATING TYPE 2022/05/02 2022/06/03 2022/06/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/04 2019/10/30 DRAWING SERIES A2-SIZE 53398 4 533980000-SD MATERIAL NUMBER SEE CHART 3 PSD 000 C SHEET NUMBER CUSTOMER GENERAL 2 2 OF 5 1 A 14 13 12 10 11 9 7 8 5 6 4 3 2 1 NOTES 引き出し方向 PULL OUT DIRECTION H 11. 梱包数量：1000個/リール NUMBER OF CONNECTOR : 1000PCS / REEL H 12. リードテープ長さ LEAD TAPE LENGTH トップテープ未装着部 TOP TAPE NON-BONDED PART 25 ±10 20 ° � �2� �22� G (⌀80) �1 ⌀380 ±2 (⌀10) 空エンボス 20~25PCS NUMBER OF EMPTY PART 引き出し方向 PULL OUT DIRECTION (⌀13) 480 ±80 V P ±1 13 DETAIL V 6 F N ±1 �5.2� CIRCUIT 1 (L) E 16. 梱包仕様書 : SPK-53398-002 PACKING SPECIFICATION : SPK-53398-002 5 吸着ノズル中心位置 VACUUM PENCIL CENTER LOCATION �H� G ±0.3 (J) U 13 E 1.75 ±0.1 �0.79� ⌀ 1.5 +0.1 0 D 12 ±0.1 PITCH 4 ±0.1 累積ピッチ40±0.2 ACCUMULATIVE PITCH 40±0.2 6 ±0.3 SECTION U-U トップテープ TOP TAPE リール REEL ポリエチレン (PE)、その他 POLYETHYLENE (PE), ETC ポリスチレン(PS)＜リサイクル材を含む＞ POLYSTYRENE(PS)＜RECYCLE MATERIAL CONTAINED＞ D 16mm幅(2~3極用) および24mm幅(4~10極用)キャリアテープ 16mm (FOR 2-3 CIRCUIT) OR 24mm (FOR 4-10 CIRCUIT) WIDTH CARRIER TAPE �5.2� �2� 引き出し方向 PULL OUT DIRECTION 53398**** �3� 1.5 +0.1 0 T 45.4 49.4 40.4 1.7 +0.25 -0.05 発注番号 ORDER NUMBER 17 発注番号 ORDER NO. 梱包形態 : エンボス梱包 PACKAGING : EMBOSSED TAPE AND REEL DOCUMENT STATUS P1 14 13 FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 RELEASE DATE 12 (L) � J� �H� CIRCUIT N P ⌀ 1.5 +0.1 0 �0.79� 極数 CIRCUIT 2022/06/03 吸着ノズル中心位置 VACUUM PENCIL CENTER LOCATION CONNECTOR 1.75 ±0.1 色：ナチュラル(ベージュ) COLOUR: NATURAL (BEIGE) M ±0.1 色：黒 COLOUR: BLACK B G ±0.3 15 14 13 12 11 10 9 8 7 6 5 4 3 2 533981571 533981471 533981371 533981271 533981171 533981071 533980971 533980871 533980771 533980671 533980571 533980471 533980371 533980271 (K) CIRCUIT 1 533981576 533981476 533981376 533981276 533981176 533981076 533980976 533980876 533980776 533980676 533980576 533980476 533980376 533980276 11:50:50 11 0.5 ±0.05 4 ±0.1 累積ピッチ40±0.2 ACCUMULATIVE PITCH 40±0.2 12 ±0.1 PITCH DIMENSION UNITS SCALE 8 L K H J 32 24 16 C 極数 キャリアテープ幅 G CARRIER TAPE WIDTH G CIRCUIT SIZE B mm NTS CURRENT REV DESC: 6 ±0.3 SECTION T-T ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 706542 DRWN: QHE31 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: SOBARA01 APPR: AIDA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 9 M 22 16.2 20.75 14.95 14.2 19.5 13.7 18.25 12.45 17 11.2 15.75 9.95 14.5 8.7 11.5 13.25 7.45 12 6.2 10.75 4.95 9.5 3.7 7.5 8.25 2.45 GENERAL TOLERANCES (UNLESS SPECIFIED) 32mm幅(11~13極用) および44mm幅(13~15極用)キャリアテープ 32mm (FOR 11-13 CIRCUIT) OR 44mm (FOR 13-15 CIRCUIT) WIDTH CARRIER TAPE 10 N 15 14 13 12 11 10 9 8 7 6 5 4 3 2 44 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION �2� T 20.8 24.5 18.7 20.2 19.55 23.25 17.45 18.3 33.4 37.4 28.4 17.05 15.8 14.55 13.3 12.05 25.4 29.4 -10.8 9.55 8.3 7.05 5.8 17.4 21.4 -4.55 �5� 極数 CIRCUIT C A 材質 MATERIAL キャリアテープ ポリプロピレン(PP) CARRIER TAPE POLYPROPYLENE(PP) ④ ⑤ ⑥ 0.5 ±0.05 �2� TABLE 2 部品 PART 番号 NO. CIRCUIT N U F THIS PRODUCT IS DELIVERED IN A HIGH BARRIER PACKAGE WITH DESICCANT. �5� CONNECTOR 360 ±35 14. トップテープの剥離強度はIEC60286-3に準拠 TOP TAPE PELING FORCE IS DEFINED BY IEC60286-3. 15. 本製品は乾燥剤入り、ハイバリア梱包仕様による納品となります。 4 �3� G 材料 : TABLE 2 参照 MATERIAL : REFER TO TABLE 2 (K) �2� 引き出し方向 PULL OUT DIRECTION 末端部 (空部) TAIL PART (EMPTY) 部品挿入部 COMPONENT SUPPLIER 7 6 5 PICOBLADE 1.25 SMT VERTICAL TIN PLATING TYPE 2022/05/02 2022/06/03 2022/06/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/04 2019/10/30 DRAWING SERIES A2-SIZE 53398 4 533980000-SD MATERIAL NUMBER SEE CHART 3 PSD 000 C SHEET NUMBER CUSTOMER GENERAL 2 3 OF 5 1 A 14 H 13 18 12 10 11 9 8 7 533981071 韓国生産分に適用 APPLIES TO PRODUCT PRODUCED BY MXK 5 6 4 3 2 1 H NOTES 18 韓国生産分の533981071(10極品)は、キャリアテープ幅32mmでの納品となります。 533981071 (10 CIRCUIT) MADE IN MXK IS DELIVERED WITH 32mm WIDTH CARRIER TAPE. G G 引き出し方向 PULL OUT DIRECTION (⌀10) (⌀80) �1 20 �22� °� �2� (⌀13) F ⌀380 ±2 F V E E P ±1 DETAIL V N ±1 D D 1.7 +0.25 -0.05 引き出し方向 PULL OUT DIRECTION 1.5 +0.1 0 R �5� CIRCUIT 1 C (L) (K) (J) 吸着ノズル中心位置 VACUUM PENCIL CENTER LOCATION CIRCUIT N �H� M ±0.1 G ±0.3 C CONNECTOR 1.75 ±0.1 33.4 37.4 28.4 18.25 B R ⌀ 1.5 +0.1 0 0.5 ±0.05 P �2� 12 ±0.1 4 ±0.1 累積ピッチ40±0.2 SECTION R-R ACCUMULATIVE PITCH 40±0.2 PITCH A DOCUMENT STATUS P1 14 13 RELEASE DATE 12 2022/06/03 11:50:50 11 DIMENSION UNITS SCALE 9 K H J 極数 キャリアテープ幅 G CARRIER TAPE WIDTH G CIRCUIT SIZE B mm NTS CURRENT REV DESC: ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 706542 DRWN: QHE31 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: SOBARA01 APPR: AIDA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 L GENERAL TOLERANCES (UNLESS SPECIFIED) 32mm幅キャリアテープ 32mm WIDTH CARRIER TAPE FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 M 10 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 6 ±0.3 �0.79� N 32 14.55 12.45 14.2 8 7 6 5 PICOBLADE 1.25 SMT VERTICAL TIN PLATING TYPE 2022/05/02 2022/06/03 2022/06/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/04 2019/10/30 DRAWING SERIES A2-SIZE 53398 4 533980000-SD MATERIAL NUMBER SEE CHART 3 PSD 000 C SHEET NUMBER CUSTOMER GENERAL 2 4 OF 5 1 A 14 13 12 10 11 9 7 8 5 6 4 3 2 1 H H 2 G 適合製品及び各種仕様書 APPLICABLE PRODUCTS AND SPECIFICATIONS PART NUMBER 53398**71 / 53398**76 梱包仕様書 PACKING SPECIFICATION PART NUMBER 適合ハウジング APPLICABLE HOUSING 51021**00 TIN PLATING F 適合圧着端子 APPLICABLE TERMINAL G SPECIFICATION NUMBER SPK-53398-002 F PART NUMBER 500798*00 500588*00 500798001 500588001 WIRE SIZE (AWG) #26-28 #28-32 #26-28 #28-32 製品仕様書 PRODUCT SPECIFICATION 510211124-PS PS 000 PS-51021-024 PS 001 E E アプリケーション仕様書 (取扱説明書) APPLICATION SPECIFICATION 510210000-AS PS 000 D D C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS P1 14 13 FORMAT: master-tb-prod-A2 REVISION: J1 DATE: 2021/05/01 RELEASE DATE 12 2022/06/03 11:50:50 11 ANGULAR TOL ± 3.0 ° 4 PLACES ± 0.2 3 PLACES ± 0.2 2 PLACES ± 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 EC NO: 706542 DRWN: QHE31 CHK'D: KOMURAKAMI APPR: SAKIYAMA INITIAL REVISION: DRWN: SOBARA01 APPR: AIDA THIRD ANGLE PROJECTION DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10 9 8 7 6 5 PICOBLADE 1.25 SMT VERTICAL TIN PLATING TYPE 2022/05/02 2022/06/03 2022/06/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2019/04/04 2019/10/30 DRAWING SERIES A2-SIZE 53398 4 533980000-SD MATERIAL NUMBER SEE CHART 3 PSD 000 C SHEET NUMBER CUSTOMER GENERAL 2 5 OF 5 1 A