54132-3633

10 9 7 8 5 6 4 3 2 1 NOTES F 1. 54132**22 のアクチュエータはハウジング内に押し下げた状態とする。 詳細寸法については図面 54132100(Doc. Part No.: 000) をご参照下さい。 ACTUATOR OF PART NO. 54132**22 SHOULD BE LOCKED . BE DETAILED DIMENSIONS, SEE 54132100(Doc. Part No.: 000) 2. 梱包数量： 1500個／リール NUMBER OF CONNECTORS : 1500 PCS/REEL. 3. リードテープ長さ LEAD TAPE LENGTH. REEL 引き出し方向 引き出し方向 PULL OUT DIRECTION PULL OUT DIRECTION 20PCS.MIN. F トップテープ接着部 (空エンボス) TOP TAPE BONDED PART. (EMPTY) E ⌀ 330 ± 2 ( ⌀ 80) E 400 MIN. D 4. G E ±1 部品挿入部 COMPONENT . SUPPLIER 2 ±0.5 末端部 (空部) TAIL PART (EMPTY) 40 MIN. D カバーテープの剥離強度については、IEC60286-3に準拠 COVER TAPE PEEL FORCE IS DEDFINED BY IEC 60286-3 5. 材料（ MATERIAL） キャリアテープ（ CARRIER TAPE） ： ポリスチレン(PS)（POLYSTYRENE） トップテープ ( TOP TAPE) ： PS リール（ REEL） ： ポリスチレン（POLYSTYLENE） 6. ELV及びRoHS適合品 ELV AND RoHS COMPLIANT. C C (⌀10) (120 °) (22) (2) B B (⌀21) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DETAIL G A DOCUMENT STATUS P1 RELEASE DATE 9 2022/11/03 SCALE mm 1:1 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) (⌀13) FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 DIMENSION UNITS ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:29 8 ANGULAR TOL 7 6 5 4 EMBOSSED TAPE PACKAGED FOR 0.5MM FPC CONN ZIF R/A HOUSING ASSY EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NVELUSAMY APPR: TKUSUHARA01 THIRD ANGLE PROJECTION 2022/10/25 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/02/18 2016/05/24 DRAWING SERIES A3-SIZE 54132 3 541320000 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 A1 SHEET NUMBER 1 OF 2 1 A 10 9 7 8 4 3 2 1 4 ±0.1 累積ピッチ40±0.2 3.3 ±0.3 F 5 6 0.2 +0.15 -0.05 0.5 ±0.05 F (6.5) �2� 54132**22 X Y X 44 ±0.3 40.4 ±0.1 �C� �20.2� �B� �D� �A� E �C � E D D 1.75 ±0.1 トップテープ TOP TAPE SECTION Y-Y Y 12 ±0.1 �3.125� �5.3� ⌀ 1.5 +0.1 0 引き出し方向 C C 30.8 28.3 27.3 25.8 23.8 45.5 23.3 22.8 22.3 21.8 20.8 �6.5� �5.3� 44 �1.9� �2.05� B �2.3� �0.5� キャリアテープ幅 CARRIER TAPE WIDTH E 31.9 29.4 28.4 26.9 24.9 24.4 23.9 23.4 22.9 21.9 26.1 23.6 22.6 21.1 19.1 18.6 18.1 17.6 17.1 16.1 29.6 27.1 26.1 24.6 22.6 22.1 21.6 21.1 20.6 19.6 C B A D 541325033 541324533 541324333 541324033 541323633 541323533 541323433 541323333 541323233 541323033 50 45 43 40 36 35 34 33 32 30 B MATERIAL NO. CKT. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. �0.5� GENERAL TOLERANCES (UNLESS SPECIFIED) SECTION X-X (SCALE 5:1) A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:29 8 ANGULAR TOL 7 6 5 4 EMBOSSED TAPE PACKAGED FOR 0.5MM FPC CONN ZIF R/A HOUSING ASSY EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: NVELUSAMY APPR: TKUSUHARA01 THIRD ANGLE PROJECTION 2022/10/25 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/02/18 2016/05/24 DRAWING SERIES A3-SIZE 54132 3 541320000 MATERIAL NUMBER CUSTOMER SEE CHART 2 GENERAL PSD 000 A1 SHEET NUMBER 2 OF 2 1 A 10 9 7 8 5 6 4 3 2 1 F F 注記 NOTES C ±0.25 M 0.6 　　　　接点部（下面） CONTACT POINT(BOTTOM SIDE) �A� �0.2� 4 0.25 ⌖ 0.2 M 0.5 (ピッチ) (PITCH) ハウジング HOUSING �1.7� 2.3 0.25 ±0.05 ターミナル TERMINAL E 1. 材質　MATERIAL ハウジング：ポリアミド(PA)、ガラス充填、ナチュラル（白）、UL94V-0 HOUSING : POLYAMIDE,GLASS FILLED,NATURAL,UL94V-0 アクチュエータ：ポニフェニレンサルファロイド（PPS), ガラス充填、黒色、UL94V-0 ACTUATOR : POLYPHENYLENE SULFIDE GLASS FILLED, BLACK, UL94V-0 ターミナル：リン青銅（t = 0.2） TERMINAL : PHOSPHOR BRONZE ( t = 0.2) 金具：リン青銅（t = 0.2） NAIL : PHOSPHOR BRONZE ( t = 0.2) 2. めっき仕様 PLATING ターミナル TERMINAL 錫銀ビスマスめっき(1.0μm以上) 下地：ニッケルめっき(1.0μm以上) TIN SILVER BISMUTH PLATING (1.0 MICROMETER MINIMUM) UNDER PLATE : NICKEL PLATING (1.0 MICROMETER MINIMUM) 金具 錫めっき（1.0μm以上) 下地：ニッケルめっき(1.0μm以上) TIN PLATING (1.0 MICROMETER MINIMUM) UNDER PLATE : NICKEL PLATING (1.0 MICROMETER MINIMUM) 3 ソルダーテール半田付け面のズレ量、及び金具半田付け面のズレ量は 基準面　 H 　に対して上方向0.1MAXIMUM、下方向0.15MAXIMUMとする。 　　　　 接点位置 LENGTH TO CONTACT POINT �3.6� 1 FPC挿入深さ INSERTION DEPTH OF FPC SECTION J-J (SCALE 15:1) D アクチュエータ ACTUATOR 0.6 �6.55� 　　（アクチュエーターが開口した状態） (WHEN ACTUATOR IS OPENED) 5 　　 （アクチュエーターが開口した状態） (WHEN ACTUATOR IS LOCKED) 3.95 0.6 ±0.1 0.2 ±0.03 1.85 2 J J C 0.7 ±0.1 　回路番号1マーク CKT. NO. 1 MARK MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM H UPPER DIRECTION : 0.1MAXIMUM LOWER DIRECTION : 0.15 MAXIMUM. 4 偶数極に適用 APPLY FOR EVEN CIRCUIT. 5 パターンはくり止め用金具 FITTING NAIL FOR PREVENTION OF PEELING OF P.C.B. PATTERN. 6 R0.3はFPCの導体にかからないこと R0.3 MUST NOT BE OVERLAPED TO PATTERN OF FPC. 7. エンボステープ梱包時は、アクチュエータがロックした状態とする IN THE PACKAGE, ACTUATOR SHOULD BE LOCKED. 8. ELV及びRoHS適合品 ELV AND RoHS COMPLIANT. H D ±0.25 (50CKT ±0.3) 5 金具 　　 FITTING NAIL 0.94 ±0.1 1.8 D C 3 B ±0.25 B E 30.5 28.0 27.0 25.5 23.5 23.0 22.5 22.0 21.5 20.5 29.3 26.8 25.8 24.3 22.3 21.8 21.3 20.8 20.3 19.3 25.65 23.15 22.15 20.65 18.65 18.15 17.65 17.15 16.65 15.65 D C B 24.5 22.0 21.0 19.5 17.5 17.0 16.5 16.0 15.5 14.5 541325033 541324533 541324333 541324033 541323633 541323533 541323433 541323333 541323233 541323033 EMBOSSED PACKAGE 50 45 43 40 36 35 34 33 32 30 B 極数 オーダー番号 ORDER No. CKT. CONNECTOR SERIES NO. : 54132**22 A 1.5 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 1 A DOCUMENT STATUS P1 RELEASE DATE 9 SCALE mm 5:1 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) 1.2 2.27 FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 DIMENSION UNITS 2022/11/03 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 3.0 ° 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:34 8 ANGULAR TOL 7 6 5 4 0.5MM FPC CONN ZIF R/A HOUSING ASSY (LOWER CONTACT) EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: ABABU01 APPR: TKUSUHARA01 THIRD ANGLE PROJECTION 2022/10/26 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/02/18 2016/05/24 DRAWING SERIES A3-SIZE 54132 3 541321000 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 000 B1 SHEET NUMBER 1 OF 2 1 A 7 8 0.5(N+1) ±0.07 0.5(N+1) ±0.07 0.35 +0.04 -0.03 0.9 2.4 0.8 (公差非累積) 0.5 ±0.05 (NON-ACCUMULATIVE) �0.3� (ピッチ) (PITCH) �0.3� 0.8 0.9 �0.17� 0.8 2.4 �2.13� 1.2 C FPC構成推奨仕様 FFC構成推奨仕様 RECOMMENDED STRUCTURE OF FPC RECOMMENDED STRUCTURE OF FFC C FPC/FFCについて： 　 抜き方向は、導体側から補強板側を推奨致します。 　 尚、接着剤の接点部への付着は導通不良の原因になりますので、 　 染み出しが無い様お願い致します。 ABOUT FPC/FFC: RECOMMENDED PUNCHER DIRECTION: FROM CONDUCTOR SIDE TO STIFFNER SIDE PLEASE PUT APPROPRIATE AMOUNT OF ADHESIVE ON ADHEREND BECAUSE THERE IS A POSSIBILITY THAT THE EXTRA ADHESIVE　 CAUSES THE　DEFECT IN ELECTRICAL CONTINUITY. �0.94� B 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) 0.9 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 導体部：　銅箔(35 or 50μm) COPPER FOIL (35 or 50μm) 2.4 E D 3.3 補強板：ポリエステル系 REINFORCE BOARD: PET 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) 0.5(N-1) ±0.05 3.3 めっき：錫めっき(0.5-1.2μm)　 　下地ニッケル(1-5μm) PLATING: TIN(0.5-1.2μm)　 　　　 NICKEL UNDER(1-5μm) 適合 FFC 推奨寸法 APPLICABLE FFC RECOMMENDED DIMENSION (仕上がり厚さ : 0.3±0.03) (THICKNESS : 0.3±0.03) 適合 FPC 推奨寸法 APPLICABLE FPC RECOMMENDED DIMENSION (仕上がり厚さ : 0.3±0.03) (THICKNESS : 0.3±0.03) D (ピッチ) (PITCH) 6 3.5 MIN. 5.5 MIN. 3.5 MIN. E F 0.3 ±0.03 0.5 ±0.05 2-R 0.3 仕上がり厚さ THICKNESS 補強板：ポリイミド REINFORCE BOARD: POLYMIDE 熱硬化接着剤 THERMOSETTING ADHESIVE ベースフィルム：ポリイミド(25μm) BASE FILM: POLYIMIDE(25μm) 熱硬化接着剤 THERMOSETTING ADHESIVE 導体部：　銅箔(35 or 50μm) COPPER FOIL (35 or 50μm) 熱硬化接着剤 THERMOSETTING ADHESIVE (ピッチ) (PITCH) 1 0.3 ±0.03 仕上がり厚さ THICKNESS 0.5 ±0.08 5.5 MIN. 0.5 ±0.05 2 0.3 ±0.03 0.5(N-1) ±0.05 0.5 ±0.08 3 めっき：錫めっき(0.5-1.2μm)　 　下地ニッケル(1-5μm) PLATING: TIN(0.5-1.2μm)　 　　　 NICKEL UNDER(1-5μm) 0.5 ±0.1 4 (補強板) (STIFFENER BOARD) 0.5(N-1) ±0.05 0.5 ±0.1 (補強板) (STIFFENER BOARD) F 5 6 カバーレイ　:　ポリイミド(25μm) COVER FILM: POLYIMIDE(25μm) 9 �0.3� 10 コネクタ位置 CONNECTOR POSITION 推奨基板レイアウト RECOMMENDED PC BOARD PATTERN DIMENSION (REF.) (マウント面) (MOUNTING SIDE) B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm 1:1 --- CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#512672. GENERAL TOLERANCES (UNLESS SPECIFIED) マスク厚　　　 : 100μm マスク開口率　 : 100% SCREEN THICKNESS 　：100 MICROMETER SCREEN OPEN RATIO　：100% A DOCUMENT STATUS FORMAT: master-tb-prod-A3 REVISION: J1 DATE: 2021/05/01 P1 RELEASE DATE 9 2022/11/03 ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 3.0 ° 0.2 1 PLACE ± 0.2 0 PLACES ± 0.2 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:33:34 8 ANGULAR TOL 7 6 5 4 0.5MM FPC CONN ZIF R/A HOUSING ASSY (LOWER CONTACT) EC NO: 724799 DRWN: SANTHN CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: ABABU01 APPR: TKUSUHARA01 THIRD ANGLE PROJECTION 2022/10/26 2022/11/03 2022/11/03 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2016/02/18 2016/05/24 DRAWING SERIES A3-SIZE 54132 3 541321000 MATERIAL NUMBER CUSTOMER GENERAL SEE TABLE 2 PSD 000 B1 SHEET NUMBER 2 OF 2 1 A