54548-0571

LANGUAGE PRODUCT SPECIFICATION [ 1. JAPANESE ENGLISH SCOPE ] 0.5 mm 9(& FPC 2$ This specification covers the 0.5mm PITCH FPC CONNECTOR series. PRODUCT NAME AND PART NUMBER ] Product Name [ 2. 4X ( X;O $ < Housing Assembly (Bottom Contact Type) 54548-**29+ 9X Embossed Tape Package for 54548-**29 Part Number 54548-**29 LEAD FREE 54548-**71 LEAD FREE *: Refer to the drawing. RATINGS ] [ 3. Item Standard 50 V Rated Voltage (MAX.) [AC ( rms) / DC ] 0.5 A Rated Current (MAX.) -20°C ~ Ambient Temperature Range + 85°C*1 *2 *1: *2: Including terminal temperature rise. FPC FPC must be met temperature range specified in this standard. A B C D SHEET 1~8 1~9 1~9 1~9 REVISE ON PC ONLY REV. E 1~9 TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) REVISED J2006-3468 ’06/05/12 M.NABEI E REV. DESCRIPTION DESIGN CONTROL STATUS J DOCUMENT NUMBER PS-54548-039 -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION WRITTEN BY CHECKED APPROVED DATE: YR/MO/DAY E,SUZUKI K.TOJO M.SASAO 2004/08/31 FILE NAME SHEET 1 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION [ 4. 4 - 1. JAPANESE ENGLISH PERFORMANCE ] Electrical Performance Item FPC 4-1-1 Contact Resistance 10mA (JIS C5402 5.4) 40 milliohm MAX. Mate applicable FPC and measure by dry circuit, 20mV MAX., 10mA. (JIS C5402 5.4) FPC DC 500V $ D/P $ D/P   4-1-2 Insulation Resistance (JIS C5402 5.2/MIL-STD-202 $ D/P $ D/P   Dielectric Strength 302 50 Megohm MIN. Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (JIS C5402 5.2/MIL-STD-202 Method 302 FPC 4-1-3 Requirement Test Condition 20mV AC250V ( 1 (JIS C5402 5.1/MIL-STD-202 ) 301 No Breakdown Mate applicable FPC and apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (JIS C5402 5.1/MIL-STD-202 Method 301 Mechanical Performance 4 - 2. Item Test Condition FPC 25±3mm &J $ &J $ 6 4-2-1 Actuator Insertion/ Withdrawal Force Requirement Mate applicable FPC and insert and withdrawal actuator at the speed rate of 25±3mm/minute. Refer to paragraph 6 &J $ 4-2-2 FPC 25±3mm FPC FPC Retention Force Insert the actuator, pull the FPC at the speed rate of 25±3mm/minute. REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 7 Refer to paragraph 7 TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 2 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION 4 - 3. JAPANESE ENGLISH Environmental Performance and Others Item Test Condition 1 10 20 &J $ 4-3-1 Requirement 60 milliohm MAX. Contact Resistance Repeated Actuator Insert and withdraw actuator up to 20 Insertion / cycles at the speed rate of less than Withdrawal 10 cycles/minute. FPC 2$ 4-3-2 4-3-3 Temperature Rise Vibration Temperature rise (UL 498) Carrying rated current load. (UL 498) DC 1mA 3 10~55~10/ 1.5mm 2 (MIL-STD-202 201) Amplitude : 1.5mm P-P Sweep time : 10~55~10 Hz in 1 minute Duration : 2 hours in each X.Y.Z. axes (MIL-STD-202 Method 201) 30°C MAX. Appearance No Damage Contact Resistance 60 milliohm MAX. Discontinuity 1.0 microsecond MAX. DC 1mA 490m/s2 {50G} 6 4-3-4 3 (JIS C60068-2-27/MIL-STD-202 213) Shock 490m/s2 {50G}, 3 strokes in each X.Y.Z. axes. (JIS C60068-2-27/MIL-STD-202 Method 213) REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 Appearance No Damage Contact Resistance 60 microsecond MAX. Discontinuity 1.0 microsecond MAX. TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 3 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION Item JAPANESE ENGLISH Test Condition FPC 96 4-3-5 Heat Resistance Requirement 85±2°C 1 2 (JIS C60068-2-2/MIL-STD-202 4-3-7 4-3-8 Cold Resistance (JIS C60068-2-1) -40±2°C, 96 hours (JIS C60068-2-1) FPC 60±2°C 95% 96 1 2 (JIS C60068-2-3/MIL-SDT-202 Humidity  P Temperature Cycling  P -55°C 1 Contact Resistance 60 milliohm MAX. Appearance No Damage Contact Resistance 60 milliohm MAX. Appearance No Damage Contact Resistance 60 milliohm MAX. 90 103) Temperature : 60±2°C Relative Humidity : 90 95% Duration : 96 hours (JIS C60068-2-3/MIL-SDT-202Method103) FPC +85°C 30 5 5 No Damage 108) 85±2°C, 96 hours (JIS C60068-2-2/MIL-STD-202Method108) FPC -40±2°C 96 1 2 4-3-6 Appearance 4-1-3 Dielectric Strength Must meet 4-1-3 Insulation Resistance 20 Megohm MIN. Appearance No Damage 30  P 1 2 (JIS C0025) 100 cycles of : a) -55°C 30 minutes b) +85°C 30 minutes (JIS C0025) REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 60 milliohm MAX. Contact Resistance TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 4 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION Item Test Condition 35±2°C 48 4 FPC 4-3-9 4-3-10 4-3-11 Salt Spray  SO2 Gas XG0 NH3 Gas 4-3-12 Solderability JAPANESE ENGLISH Requirement 5±1% (JIS C60068-2-11/MIL-STD-202 Appearance No Damage Contact Resistance 60 milliohm MAX. Contact Resistance 60 milliohm MAX. Contact Resistance 60 milliohm MAX. 101) 48 4 hours exposure to a salt spray from the 5±1% solution at 35±2°C. (JIS C60068-2-11/MIL-STD-202 Method 101) FPC 40 2 50 5ppm 24  24 hours exposure to 50 5ppm SO2 gas at 40 2 . FPC 28% 40 (1L 25mL ) XG0  40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. 0.2mm 0.2mm 245 3 3 0.5 Dip solder tails and fitting nail into the molten solder(held at 245 3 )up to 0.2mm from the bottom of the housing for 3 0.5 seconds. 90% Solder Wetting O:R 90% of immersed area must show no voids, pinholes. 8 (When reflowing) Repeat paragraph 8,condition twe times. $ ) ( 4-3-13 0.2mm 370 400 Resistance to Soldering Heat + 5 0.2mm Appearance Dip terminal and fitting nail (held at 370 400 ) up to 0.2mm from the tip for 5 seconds MAX. ( ): No Damage Reference Standard { }: Reference Unit REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 5 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION [ 5. JAPANESE ENGLISH PRODUCT SHAPE, DIMENSIONS AND MATERIALS ] Refer to the drawing [ 6. &J $ ACTUATOR INSERTION/WITHDRAWAL FORCE ] No.of UNIT CIRCUIT 4 6 7 9 10 11 12 13 14 15 16 18 19 20 21 22 24 26 N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} ( ) Insertion Force (MAX.) 6 20 1st 6th 20th 28.4 26.4 26.4 {2.9} {2.7} {2.7} 30.3 28.4 28.4 {3.1} {2.9} {2.9} 31.3 29.4 29.4 {3.2} {3.0} {3.0} 33.3 31.3 31.3 {3.4} {3.2} {3.2} 34.3 32.3 32.3 {3.5} {3.3} {3.3} 35.2 33.3 33.3 {3.6} {3.4} {3.4} 36.2 34.3 34.3 {3.7} {3.5} {3.5} 37.2 35.3 35.3 {3.8} {3.6} {3.6} 38.2 36.2 36.2 {3.9} {3.7} {3.7} 39.2 37.2 37.2 {4.0} {3.8} {3.8} 40.1 38.2 38.2 {4.1} {3.9} {3.9} 42.1 40.1 40.1 {4.3} {4.1} {4.1} 43.1 41.1 41.1 {4.4} {4.2} {4.2} 44.1 42.1 42.1 {4.5} {4.3} {4.3} 45.0 43.1 43.1 {4.6} {4.4} {4.4} 46.0 44.1 44.1 {4.7} {4.5} {4.5} 48.0 46.0 46.0 {4.9} {4.7} {4.7} 49.9 48.0 48.0 {5.1} {4.9} {4.9} REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 ( ) Withdrawal Force (MAX.) 6 20 1st 6th 20th 27.2 33.3 33.3 {3.8} {3.4} {3.4} 39.2 35.2 35.2 {4.0} {3.6} {3.6} 40.1 36.2 36.2 {4.1} {3.7} {3.7} 42.1 38.2 38.2 {4.3} {3.9} {3.9} 43.1 39.2 39.2 {4.4} {4.0} {4.0} 44.1 40.1 40.1 {4.5} {4.1} {4.1} 45.0 41.1 41.1 {4.6} {4.2} {4.2} 46.1 42.2 42.2 {4.7} {4.3} {4.3} 47.0 43.1 43.1 {4.8} {4.4} {4.4} 48.0 44.1 44.1 {4.9} {4.5} {4.5} 49.0 45.0 45.0 {5.0} {4.6} {4.6} 50.9 47.0 47.0 {5.2} {4.8} {4.8} 51.9 48.0 48.0 {5.3} {4.9} {4.9} 52.9 49.0 49.0 {5.4} {5.0} {5.0} 53.9 49.9 49.9 {5.5} {5.1} {5.1} 54.8 50.9 50.9 {5.6} {5.2} {5.2} 56.8 52.9 52.9 {5.8} {5.4} {5.4} 58.8 54.8 54.8 {6.0} {5.6} {5.6} TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 6 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION [ 7. FPC JAPANESE ENGLISH FPC RETENTION FORCE ] No.of UNIT CIRCUIT 4 6 7 9 10 11 12 13 14 N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} ( ) Retention Force (MIN.) 10 1st 0.35 {0.035} 0.9 {0.09} 1.2 {0.12} 1.8 {0.18} 2.1 {0.21} 3.0 {0.30} 2.8 {0.28} 2.9 {0.29} 3.4 {0.35} REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 10th 0.2 {0.02} 0.7 {0.07} 1.0 {0.10} 1.5 {0.15} 1.8 {0.18} 2.5 {0.25} 2.3 {0.23} 2.5 {0.25} 3.0 {0.30} No.of UNIT CIRCUIT 15 16 18 19 20 21 22 24 26 N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} N {kgf} ( ) Retention Force (MIN.) 10 1st 3.7 {0.38} 3.8 {0.38} 4.2 {0.42} 4.5 {0.45} 4.7 {0.47} 4.9 {0.50} 5.2 {0.53} 5.7 {0.58} 6.2 {0.63} 10th 3.2 {0.33} 3.3 {0.33} 3.7 {0.37} 4.0 {0.40} 4.2 {0.42} 4.4 {0.44} 4.7 {0.48} 5.2 {0.53} 5.7 {0.58} TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 7 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION O:R [ 8. JAPANESE ENGLISH INFRARED REFLOW CONDITION] 9  +5 250 -0 +5 250 -0 (PEAK TEMP.) 20 40 230 20 40 sec. (230 MIN.) 90 120 90 120 sec. 150 200 Pre-heat 150 200 ) N: TEMPERATURE CONDITION GRAPH ( (TEMPERATURE ON BOARD PATTERN SIDE) O:R O:R O:R ( ) NOTE : Please check the mount condition (reflow soldering condition) by your own devices beforehand, because the condition changes by the soldering devices, p.c.boards, and so on. REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 8 OF 9 EN-37-1(019) PS54548039 D.DOC LANGUAGE PRODUCT SPECIFICATION JAPANESE ENGLISH REV. REV. RECORD DATE EC NO. WRTTN: CH’K: A RELEASED 04/02/27 J2004-2733 E.SUZUKI K.TOJO B REVISED 04/08/31 J2005-0599 M.NABEI K.TOJO C REVISED 04/12/02 J2005-1627 E.SUZUKI K.TOJO D REVISED ‘ 05/01/06 J2005-1936 M.UMEDA K.TOYODA E REVISED ‘06/05/12 J2006-3468 M.NABEI K.TOYODA REVISE ON PC ONLY E SEE SHEET 1 OF 9 REV. DESCRIPTION DOCUMENT NUMBER PS-54548-039 TITLE: 0.5 FPC Conn ZIF SMT (BOTTOM CONTACT) -LEAD FREETHIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INC. AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SHEET FILE NAME 9 OF 9 EN-37-1(019) PS54548039 D.DOC