5600200221

MATERIAL 4 2 SERIES NO. (PITCH) 3 2 2×(N-1)±0.05 CKT. NO. 1 1.2±0.05 2±0.05 1 F 1A M□□ (0.9) (2) 8.78±0.05 3.2 >PA9T< D & DIE NO. 4.2±0.05 □0.5 (PITCH) CAV. NO. E 5 6 560020 F 7 8 2.2±0.05 9 7.8 10 E C B (2×N＋3.2)±0.05 TRADE MARK Z 2±0.05 参考基板レイアウト（N=極数) (0.7) A PCB PATTERN LAYOUT(N:CIRCUIT) 5.05 502351-**0* ピン PIN 1.2 Z ウエハー WAFER D (9.3) 8 D 1.35 フィッティングネイル FITTING NAIL C SECTION Z-Z 注記 NOTES B A DOCUMENT STATUS MATED DRAWING (0.5) １．材質 8CKTS 　　ウエハー：耐熱性ナイロン UL94V-0 　　ピン：銅合金、ニッケル下地、錫メッキ、金メッキ 　　フィッティングネール：銅合金、ニッケル下地、錫メッキ 　　MATERIAL 　　WAFER: POLYAMIDE UL94V-0 　　PIN: COPPER ALLOY,GOLD OR TIN OVER NICKEL PLATE. 　　FINNTING NAIL: COPPER ALLOY, TIN OVER NICKEL PLATE. ２．色：ナチュラル、黒、赤、青 　　COLOR: NATURAL, BLACK, RED, BLUE ３．嵌合相手： 　　ハウジング:502351-**0* 　　錫メッキ端子:50212-8*00,50372-8*00,560085-0101 　　金メッキ端子:56161-8*81 　　MATES WITH 　　HOUSING:502351-**0* 　　SN PLATING TERMINAL: 50212-8*00,50372-8*00,560085-0101 　　AU PLATING TERMINAL: 56161-8*81 FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 C 嵌合図 P1 RELEASE DATE 9 2020/04/06 B ４．エンボス梱包品の詳細はSD-560020-002参照 　　DETAILED TAPING PACKAGE, SEE SD-560020-002 5．半田付け面のコプラナリティ: 0.1mm MAX. 　　CO-PLANARITY OF SOLDER TAILS TO BE 0.1mm MAX. 6．一般公差 　　GENERAL TOLERANCES 　　10 UNDER: ±0.2 　　10 OVER 30 UNDER: ±0.25 　　30 OVER: ±0.3 　　ANGULAR: ±1° INITIAL REVISION: DRWN SHSHIBATA 2009/02/18 CHECK HKOMATSU 2009/02/18 APPR AKANESHIGE 2009/02/18 00:33:42 8 7 6 5 FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = 0 = 0 = 0 mm 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± DIVISIONAL SYMBOLS 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 ° EC NO: 635305 DRWN: MUNEMOTO CHK'D: HIIJIMA APPR: TOSADA INITIAL REVISION: DRWN: DRAWN BY APPR: APPR BY THIRD ANGLE PROJECTION 2020/04/02 2020/04/03 2020/04/06 DRAWING 0099/99/99 0099/99/99 SERIES 2.0MM PITCH W/B CONN. WAFER ASSY ST. SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-560020-001 MATERIAL NUMBER A3-SIZE 560020 3 PSD 001 CUSTOMER GENERAL MARKET 2 K SHEET NUMBER 1 OF 4 1 A 10 9 7 8 5 6 4 3 2 1 5.8 6 9.7 12.6 6.3 8 10.9 7.8 8 11.7 14.6 7.8 7.8 7.8 7.8 F 7.8 F 11.8 12 15.7 18.6 9.8 10 13.7 16.6 8 8 4CKTS 3CKTS 2CKTS 8 8 E 8 E 5CKTS 6CKTS 11.8 13.1 17.7 20.6 11.8 19.1 23.7 26.6 B C 7CKTS 8 8 11.8 17.1 21.7 24.6 8 C 7.8 7.8 D 7.8 D 9CKTS B 10CKTS FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = A DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2020/04/06 INITIAL REVISION: DRWN SHSHIBATA 2009/02/18 CHECK HKOMATSU 2009/02/18 APPR AKANESHIGE 2009/02/18 00:33:42 8 7 6 5 0 = 0 = 0 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± DIVISIONAL SYMBOLS 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 ° EC NO: 635305 DRWN: MUNEMOTO CHK'D: HIIJIMA APPR: TOSADA INITIAL REVISION: DRWN: DRAWN BY APPR: APPR BY THIRD ANGLE PROJECTION 2020/04/02 2020/04/03 2020/04/06 DRAWING 0099/99/99 0099/99/99 SERIES 2.0MM PITCH W/B CONN. WAFER ASSY ST. SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-560020-001 MATERIAL NUMBER A3-SIZE 560020 3 PSD 001 CUSTOMER GENERAL MARKET 2 K SHEET NUMBER 2 OF 4 1 A 10 9 7 8 5 6 4 3 2 1 7.8 7.8 F 7.8 F 11.8 21.1 25.7 28.6 11.8 23.1 27.7 30.6 11.8 25.1 29.7 32.6 8 8 E 8 E 12CKTS 11CKTS 13CKTS D 7.8 7.8 D C 8 C 11.8 29.1 33.7 36.6 8 11.8 27.1 31.7 34.6 14CKTS 15CKTS B B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = A DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2020/04/06 INITIAL REVISION: DRWN SHSHIBATA 2009/02/18 CHECK HKOMATSU 2009/02/18 APPR AKANESHIGE 2009/02/18 00:33:42 8 7 6 5 0 = 0 = 0 mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± DIVISIONAL SYMBOLS 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 ° EC NO: 635305 DRWN: MUNEMOTO CHK'D: HIIJIMA APPR: TOSADA INITIAL REVISION: DRWN: DRAWN BY APPR: APPR BY THIRD ANGLE PROJECTION 2020/04/02 2020/04/03 2020/04/06 DRAWING 0099/99/99 0099/99/99 SERIES 2.0MM PITCH W/B CONN. WAFER ASSY ST. SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-560020-001 MATERIAL NUMBER A3-SIZE 560020 3 PSD 001 CUSTOMER GENERAL MARKET 2 K SHEET NUMBER 3 OF 4 1 A 10 9 F Sn NATURAL E Sn BLACK C PLATING COLOR 33.7 31.7 29.7 27.7 25.7 23.7 21.7 19.7 17.7 15.7 13.7 11.7 9.7 8.0 36.6 34.6 32.6 30.6 28.6 26.6 24.6 22.6 20.6 18.6 16.6 14.6 12.6 10.9 29.1 27.1 25.1 23.1 21.1 19.1 17.1 15.1 13.1 12 10 8 6 33.7 31.7 29.7 27.7 25.7 23.7 21.7 19.7 17.7 15.7 13.7 15 14 13 12 11 10 9 8 7 6 5 4 3 2 560020-1520 560020-1420 560020-1320 560020-1220 560020-1120 560020-1020 560020-0920 560020-0820 560020-0720 560020-0620 560020-0520 560020-0420 560020-0320 36.6 34.6 32.6 30.6 28.6 26.6 24.6 22.6 20.6 18.6 16.6 14.6 12.6 10.9 560020-1521 15 560020-1421 14 13 560020-1321 560020-1221 12 560020-1121 11 560020-1021 10 560020-0921 9 560020-0821 8 560020-0721 7 560020-0621 6 560020-0521 5 11.7 560020-0421 4 9.7 560020-0321 3 8.0 560020-0221 2 EMBOSSED PACKAGE A D CKTS C B ORDER NO. CONNECTOR SERIES NO. 560020-**28 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 9.8 7.8 5.8 6.3 5 6 560020-0220 EMBOSSED PACKAGE A D C B ORDER NO. CONNECTOR SERIES NO. 560020-**08 PLATING COLOR D 29.1 27.1 25.1 23.1 21.1 19.1 17.1 15.1 13.1 12 10 8 6 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 9.8 7.8 5.8 6.3 7 8 Au NATURAL PLATING COLOR CKTS Sn RED PLATING COLOR 4 29.1 27.1 25.1 23.1 21.1 19.1 17.1 15.1 13.1 12 10 8 6 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 9.8 7.8 5.8 6.3 33.7 31.7 29.7 27.7 25.7 23.7 21.7 19.7 17.7 15.7 13.7 11.7 9.7 8.0 3 2 36.6 34.6 32.6 30.6 28.6 26.6 24.6 22.6 20.6 18.6 16.6 14.6 12.6 10.9 560020-1530 560020-1430 560020-1330 560020-1230 560020-1130 560020-1030 560020-0930 560020-0830 560020-0730 560020-0630 560020-0530 560020-0430 560020-0330 560020-0230 EMBOSSED PACKAGE A D C B ORDER NO. CONNECTOR SERIES NO. 560020-**18 11.8 15.1 19.7 22.6 560020-0822 11.8 12 15.7 18.6 560020-0622 7.8 5.8 6.3 8 6 11.7 9.7 8.0 14.6 12.6 10.9 15 14 13 12 11 10 9 8 7 6 5 4 3 2 Sn BLUE 560020-0422 560020-0322 560020-0222 EMBOSSED PACKAGE A D CKTS C B ORDER NO. CONNECTOR SERIES NO. 560020-**48 PLATING COLOR 1 15 14 13 12 11 10 9 8 7 6 5 4 3 2 F E CKTS 11.8 15.1 19.7 22.6 560020-0823 11.8 12 15.7 18.6 560020-0623 7.8 5.8 6.3 8 6 11.7 9.7 8.0 14.6 12.6 10.9 15 14 13 12 11 10 9 8 7 6 5 4 3 2 D C 560020-0423 560020-0323 560020-0223 EMBOSSED PACKAGE A D CKTS C B ORDER NO. CONNECTOR SERIES NO. 560020-**68 B B FUNCTIONAL THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION SCALE SYMBOLS DIMENSION UNITS CURRENT REV DESC: = A DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 9 2020/04/06 INITIAL REVISION: DRWN SHSHIBATA 2009/02/18 CHECK HKOMATSU 2009/02/18 APPR AKANESHIGE 2009/02/18 00:33:42 8 7 6 5 0 = 0 = 0 mm 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± DIVISIONAL SYMBOLS 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 ° EC NO: 635305 DRWN: MUNEMOTO CHK'D: HIIJIMA APPR: TOSADA INITIAL REVISION: DRWN: DRAWN BY APPR: APPR BY THIRD ANGLE PROJECTION 2020/04/02 2020/04/03 2020/04/06 DRAWING 0099/99/99 0099/99/99 SERIES 2.0MM PITCH W/B CONN. WAFER ASSY ST. SMT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-560020-001 MATERIAL NUMBER A3-SIZE 560020 3 PSD 001 CUSTOMER GENERAL MARKET 2 K SHEET NUMBER 4 OF 4 1 A 9 7 8 5 6 4 3 2 1 NOTES (⌀80) 1. 製品番号： 　ナチュラル・錫めっき 560020-**20 　ナチュラル・金めっき 560020-**30 　黒・錫めっき 560020-**21 　赤・錫めっき 560020-**22 　青・錫めっき 560020-**23 　詳細寸法については、製品単体図面を参照ください。 PART NO. NATURAL・Sn Plating 5600020-**20 NATURAL・Au Plating 560020-**30 BLACK・Sn Plating 5600020-**21 RED・Sn Plating 5600020-**22 BLUE・Sn Plating 5600020-**23 　 SEE SALES DRAWING FOR CONNECTOR 2. 梱包数量：　650個/REEL NUMBER OF CONNECTORS 650 PCS/REEL 3. リードテープ長さ LEAD TAPE LENGTH ⌀380±2 E DETAIL Y Y 44mm or more WIDTH TAPE E±1 32mm WIDTH TAPE D D±1 8.9±0.3 (16) X 0.5 PITCH 24mm WIDTH TAPE E D トップテープ未接着部 TOP TAPE NON-BONDED PART 引き出し方向 25 ±10 空エンボス 10～15 PCS. PULL OUT DIRECTION CONNECTOR トップテープリーダー部 TOP TAPE LEADER PART 400MIN. EMBOSSED TAPE TOP TAPE .1 +0 0 1.75±0.1 .5 ⌀1 B 4±0.1 末端部(空部) 部品挿入部 TAIL PART (EMPTY) D 1260MIN. (80 POCKETS MIN.) COMPONENT SUPPLIER C 4. 材料 MATERIAL キャリアテープ：　ポリスチレン CARRIER TAPE: POLYSTYRENE トップテープ：　PET, PE, PEF TOP TAPE リール：　ポリスチレン REEL: POLYSTYRENE 5. 一般公差 GENERAL TOLERANCES 10 UNDER: ±0.2 10 OVER 30 UNDER: ±0.25 30 OVER: ±0.3 ANGULAR: ±1° C (A) CONNECTOR (B) CENTER OF 32mm WIDTH TAPE ONLY 28.4 C F 44mm or more WIDTH TAPE NUMBER OF EMPTY PART ACCUMULATIVE PITCH : 40±0.2 B PULL OUT DIRECTION DIRECTION OF CONNECTOR IN EMBOSSED TAPE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A MM X (SCALE 10:1) ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 9 P1 RELEASE DATE 2019/12/27 8 INCH 4 PLACES ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:05:28 7 6 5 4 ° EC NO: 629663 DRWN: MSATO08 CHK'D: HIIJIMA APPR: TOSADA INITIAL REVISION: DRWN: YTAMAKI APPR: MAYAMAMOTO THIRD ANGLE PROJECTION DRAWING 2019/12/26 2019/12/27 2019/12/27 2014/05/23 2014/06/30 A3-SIZE 560020 3 PRODUCT CUSTOMER DRAWING 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-560020-003 MATERIAL NUMBER SERIES A 2.0MM PITCH W/B ST. WAFER ASSY EMBOSSED TAPE PACKAGE SEE CHART PSD 001 F1 SHEET NUMBER CUSTOMER GENERAL MARKET 1 1 OF 2 9 7 8 52.4 61.4 57.4 56 26.2 E Sn NATURAL D PLATING 40.4 49.4 45.4 44 20.2 28.4 37.4 33.4 32 14.2 29.4 25.4 24 11.5 C (B) F COLOR E D (A) 560020-1520 560020-1420 560020-1320 560020-1220 560020-1120 560020-1020 560020-0920 560020-0820 560020-0720 560020-0620 560020-0520 560020-0420 560020-0320 560020-0220 エンボス梱包品 製品番号 EMBOSSED PACKAGE 15 14 13 12 11 10 09 08 07 06 05 04 03 02 52.4 61.4 57.4 Au NATURAL CIRCUITS MATERIAL NO. 52.4 61.4 57.4 56 26.2 C Sn BLACK 36.9 34.9 32.9 30.9 28.9 26.9 24.9 22.9 20.9 18.9 16.9 14.9 12.9 11.2 40.4 49.4 45.4 44 20.2 28.4 37.4 33.4 32 14.2 29.4 25.4 24 11.5 B PLATING COLOR F E D C (B) 36.9 34.9 32.9 30.9 28.9 26.9 24.9 22.9 20.9 18.9 16.9 14.9 12.9 11.2 (A) 560020-1521 15 14 560020-1421 13 560020-1321 12 560020-1221 11 560020-1121 10 560020-1021 09 560020-0921 08 560020-0821 07 560020-0721 06 560020-0621 05 560020-0521 04 560020-0421 03 560020-0321 02 560020-0221 エンボス梱包品 製品番号 CIRCUITS EMBOSSED PACKAGE MATERIAL NO. 5 6 Sn RED PLATING COLOR 4 56 40.4 49.4 45.4 44 28.4 37.4 33.4 32 29.4 25.4 24 D E F 36.9 26.2 34.9 32.9 30.9 28.9 26.9 20.2 24.9 22.9 20.9 18.9 14.2 16.9 14.9 11.5 12.9 11.2 C (B) 44 22.9 560020-0822 18.9 560020-0622 32 14.2 29.4 25.4 24 14.9 11.5 12.9 11.2 COLOR 1 15 14 13 12 11 10 09 08 07 06 05 04 03 02 EMBOSSED PACKAGE 20.2 28.4 37.4 33.4 F 560020-1530 560020-1430 560020-1330 560020-1230 560020-1130 560020-1030 560020-0930 560020-0830 560020-0730 560020-0630 560020-0530 560020-0430 560020-0330 560020-0230 エンボス梱包品 製品番号 2 E D CIRCUITS MATERIAL NO. 40.4 49.4 45.4 PLATING (A) 3 E D C (B) (A) 15 14 13 12 11 10 09 08 07 06 05 04 03 02 40.4 49.4 45.4 Sn BLUE 560020-0422 560020-0322 560020-0222 エンボス梱包品 製品番号 CIRCUITS PLATING COLOR EMBOSSED PACKAGE MATERIAL NO. 44 20.2 22.9 560020-0823 18.9 560020-0623 28.4 37.4 33.4 32 14.2 29.4 25.4 24 14.9 11.5 12.9 11.2 F D E C 15 14 13 12 11 10 09 08 07 06 05 04 03 02 (B) (A) C 560020-0423 560020-0323 560020-0223 エンボス梱包品 製品番号 CIRCUITS B EMBOSSED PACKAGE MATERIAL NO. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE mm NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) A MM ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± 1 PLACE ANGULAR TOL DOCUMENT STATUS FORMAT: Met-lega-master-tb-prod-A3 REVISION: D DATE: 2018/01/18 9 P1 RELEASE DATE 2019/12/27 8 INCH 4 PLACES ± ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 08:05:28 7 6 5 4 ° EC NO: 629663 DRWN: MSATO08 CHK'D: HIIJIMA APPR: TOSADA INITIAL REVISION: DRWN: YTAMAKI APPR: MAYAMAMOTO THIRD ANGLE PROJECTION DRAWING 2019/12/26 2019/12/27 2019/12/27 2014/05/23 2014/06/30 A3-SIZE 560020 3 PRODUCT CUSTOMER DRAWING 2 DOC TYPE DOC PART REVISION DOCUMENT NUMBER SD-560020-003 MATERIAL NUMBER SERIES A 2.0MM PITCH W/B ST. WAFER ASSY EMBOSSED TAPE PACKAGE SEE CHART PSD 001 F1 SHEET NUMBER CUSTOMER GENERAL MARKET 1 2 OF 2