63813-0500

63813-0500 Extractor Tool Extractor Tool Instruction Sheet Order No. 63813-0500 This tool is used for the removal of Sabre Product Wire-to-Wire and Wire-to-Board terminal series in both plug and receptacles. OPERATION: 1. Push the terminal forward in the arrow direction before using the Extractor Tool as shown in Figure 1. Insert the Extractor Tool into the slot on the side of the connector housing. 2. Depress the terminal locking tang beams, push the terminal back through the connector slot and pull the terminated wire out in the arrow direction as shown in Figure 2. 3. Molex does not offer repair parts for Extraction Tools due to the inexpensive nature of the tool. CONNECTOR HOUSING WIRE EXTRACTOR TOOL TERMINAL CONNECTOR HOUSING EXTRACTOR TOOL EXTRACTOR TOOL WIRE TERMINAL Figure 1 LOCKING TANG BEAMS TERMINAL CONNECTOR HOUSING LOCKING TANG BEAMS Molex Application Tooling Group 1150 E. Diehl Road Naperville, IL 60563 Tel: (630) 969-4550 Fax: (630) 505-0049 TERMINAL CONNECTOR HOUSING Doc No. 63813-0500 Revision: B Figure 2 Release Date: 04-22-03 Revision Date: 04-22-03 EXTRACTOR TOOL UNCONTROLLED COPY Page 1 of 1