71436-1164

12 11 10 9 7 8 4 3 2 * THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX ll OF DIRECTIVE 2000/53/EC" CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. A H 5 6 B X 0.35 ⌖ 0.20 X 1.00 5.60 ±0.20 G 5.14 4.21 6.10 1.00 SEE NOTE 6 8.79 C 6.60 F SEE NOTE 10 0.75 ⌀ 1.20 E CIRCUIT DIM.A DIM.B DIM.C DIM.D SIZE 20 13.90 9.00 12.58 12.40 H 30 18.90 14.00 17.58 17.40 40 23.90 19.00 22.58 22.40 50 28.90 24.00 27.58 27.40 60 33.90 29.00 32.58 32.40 64 35.90 31.00 34.58 34.40 70 38.90 34.00 37.58 37.40 G 80 43.90 39.00 42.58 42.40 84 45.90 41.00 44.58 44.40 90 48.90 44.00 47.58 47.40 100 53.90 49.00 52.58 52.40 110 58.90 54.00 57.58 57.40 F 120 63.90 59.00 62.58 62.40 +0.13 TOP OF HOUSING 7.35 -0.18 TO SEATING PLANE 1.05 SEE NOTE 5 1 +0.31 -0.26 E D NOTES B ±0.04 A 1. HOUSING MATERIAL: G.F. THERMOPLASTIC; UL RATING: 94V-0; COLOR: WHITE TERMINAL MATERIAL: PHOSPHOR BRONZE; 0.205 THICK. VACUUM CAP MATERIAL: STAINLESS STEEL; 0.255 THICK. 2. PLATING FINISHES: SEE SHEET 2. 3. THIS PART, WHEN MATED WITH MOLEX 1.0mm RECEPTACLE CONNECTOR SERIES 71439, CONFORMS TO MOLEX PRODUCT SPECIFICATION PS-71436-9999. REFER TO TABLE ON SHEET 2 FOR MATED STACK HEIGHTS FOR THIS PLUG. 4. PACKAGING SPECIFICATIONS: REFER TO TABLE ON SHEET 2. 5. PEGS ARE OPTIONAL. REFER TO TABLE ON SHEET 2. 6. VACUUM PICK & PLACE CAP OPTIONAL. REFER TO TABLE ON SHEET 2. 7. THIS PART CONFORMS TO EIA STANDARD 700 AAB FOR 1.0mm TWO-PART CONNECTORS FOR USE WITH PARALLEL PRINTED BOARDS. 8. COPLANARITY OF SMT TAILS: 0.10 MAX. 9. 64-CIRCUIT PLUG ASSEMBLY WITH PEGS AND VACUUM CAP SHOWN FOR ILLUSTRATION PURPOSES ONLY. 10. DATE CODE STAMP IS WEEK, YEAR LOCATED APPROXIMATELY WHERE SHOWN. 1.00 D 6.00 ±0.05 2.30 MINIMUM 0.60 ±0.05 ⌖ 0.08 A C B 0.60 ±0.05 ⌖ 0.08 A D C ⌀1.40 ±0.03 1.00 2 PLS. ⌖ 0.10 B 6.00 ±0.05 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION B D ±0.05 A 2.30 MINIMUM RECOMMENDED PCB THICKNESS: 1.00±0.10 MINIMUM DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 11 2020/07/21 10 SCALE mm 4:1 CURRENT REV DESC: OBSOLETED PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) RECOMMENDED PCB LAYOUT (WITH AND WITHOUT PEGS) A DIMENSION UNITS ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:08 9 8 7 6 5 EC NO: 638770 DRWN: VLOKESHA CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2020/03/09 2020/07/21 2020/07/21 SALES ASSY, 1.0MM BOARD TO BOARD PLUG CONNECTOR 3.30 STACK HEIGHT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71436 3 714361000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A2 SHEET NUMBER 1 OF 2 1 A 12 11 10 9 7 8 5 6 4 3 2 1 H H STANDARD CIRCUIT SIZE PLUG ASSY. PART NUMBER PEGS CONTACT PLATING SEE PLATING NOTES PICK & PLACE CAP PACKAGING SPEC. NUMBER PACKAGING TYPE 64 71436-1164 YES 30 GOLD NO PK-70873-0607 TUBE 64 71436-1364 YES 30 GOLD YES PK-70873-0607 TUBE 64 71436-1464 YES 30 GOLD YES PK-70873-063 TAPE & REEL 64 71436-1564 NO 30 GOLD NO PK-70873-0606 TUBE 64 71436-1864 NO 30 GOLD YES PK-70873-063 TAPE & REEL 64 71436-1264 YES 50 GOLD NO PK-70873-0607 TUBE 64 71436-1064 NO 50 GOLD NO PK-70873-0607 TUBE G G F F RECOMMENDED PLUG/RECEPTACLE COMBINATION FOR MATED STACK HEIGHT PER EIA STANDARD 700 AAAB E MATED STACK HEIGHT RECEPTACLE HEIGHT RECEPTACLE SERIES NO. PLUG HEIGHT PLUG SERIES NO. 9.00 11.00 14.00 5.30 7.30 10.30 71439-0*** 71439-1*** 71439-3*** 3.30 71436-1*** E D D PLATING PER ES-88 PRINTED CIRCUIT BOARD PLUG STACK HEIGHT + RECEPTACLE STACK HEIGHT + 0.40 (SOLDER PASTE ALLOWANCE) = MATED STACK HEIGHT PLUG CONNECTOR 30 GOLD - 0.76 MICROMETERS MINIMUM GOLD IN CONTACT AREA AND 1.91 MICOMETERS MINIMUM MATTE TIN IN PC TAIL AREA OVER 1.27 MICROMETERS MINIMUM PLATING OVERALL. P 50 GOLD - 1.27 MICROMETERS MINIMUM GOLD IN CONTACT AREA AND 1.91 MICOMETERS MINIMUM MATTE TIN IN PC TAIL AREA OVER 1.27 MICROMETERS MINIMUM PLATING OVERALL. C BOTTOMING SURFACE C H R P = PLUG STACK HEIGHT R = RECEPTACLE STACK HEIGHT H = MATED STACK HEIGHT B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION RECEPTACLE CONNECTOR PRINTED CIRCUIT BOARD DIMENSION UNITS SCALE mm 1:1 CURRENT REV DESC: OBSOLETED PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: J DATE: 2020/01/14 P1 RELEASE DATE 11 2020/07/21 10 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 04:44:08 9 8 7 6 5 EC NO: 638770 DRWN: VLOKESHA CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2020/03/09 2020/07/21 2020/07/21 SALES ASSY, 1.0MM BOARD TO BOARD PLUG CONNECTOR 3.30 STACK HEIGHT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71436 3 714361000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A2 SHEET NUMBER 2 OF 2 1 A