71439-3464

12 11 10 9 7 8 5 6 4 3 2 CIRCUIT DIM.A DIM.B DIM.C DIM.D SIZE A B H X 0.35 ⌖ 0.35 X 1.00 5.60 ±0.20 6.10 3.66 G 1.75 4.21 SEE NOTE 7 8.79 D 6.60 SEE NOTE 11 F 10.30 1.05 E C SEE NOTE 6 1 0.80 ⌀1.20 20 13.90 9.00 12.40 12.22 H 30 18.90 14.00 17.40 17.22 40 23.90 19.00 22.40 22.22 50 28.90 24.00 27.40 27.22 60 33.90 29.00 32.40 32.22 64 35.90 31.00 34.40 34.22 70 38.90 34.00 37.40 37.22 G 80 43.90 39.00 42.40 42.22 84 45.90 41.00 44.40 44.22 90 48.90 44.00 47.40 47.22 100 53.90 49.00 52.40 52.22 110 58.90 54.00 57.40 57.22 F 120 63.90 59.00 62.40 62.22 +0.18 TOP OF HOUSING -0.13 TO SEATING PLANE +0.26 -0.31 E B ±0.04 A 1.00 NOTES D 6.00 ±0.05 2.10 MINIMUM 0.60 ±0.05 ⌖ 0.08 A C B 0.60 ±0.05 ⌖ 0.08 A ⌀1.40 ±0.03 1.00 2 PLS. D 1. HOUSING MATERIAL: LIQUID CRYSTAL POLYMER(LCP) GLASS FILLED; UL RATING; 94V-0; COLOR: WHITE OR BLACK. TERMINAL MATERIAL: PHOSPHOR BRONZE; 0.205 THICK VACUUM CAP MATERIAL: STAINLESS STEEL; 0.255 THICK. 2. PLATING FINISHES: SEE SHEET 2 3. PRODUCT SPECIFICATION: PS-71436-999 4. PACKAGING SPECIFICATIONS: REFER TO CHART ON SHEET 2. 5. MATES WITH: 71436 SERIES. SEE SHEET 2 FOR MATING VIEW AND STACK HEIGHT. 6. PEGS ARE OPTIONAL. REFER TO CHART ON SHEET 2. 7. VACUUM PICK & PLACE CAP IS OPTIONAL. REFER TO CHART ON SHEET 2. 8. THIS PART CONFORMS TO EIA STANDARD 700 AAAB FOR 1.0mm TWO-PART CONNECTORS FOR USE WITH PARALLEL PRINTED BOARDS. 9. COPLANARITY OF SMT TAILS: 0.10mm MAXIMUM. 10. 64-CIRCUIT RECEPTACLE ASSEMBLY WITH PEGS AND VACUUM CAP SHOWN FOR ILLUSTRATION PURPOSES ONLY. 11. ASSEMBLY TO HAVE DATE CODE: XX XX ⌖ 0.10 B C YEAR WEEK 6.00 ±0.05 B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION B A C ±0.05 2.10 MINIMUM RECOMMENDED PCB THICKNESS: 1.00±0.10 DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2019/02/01 10 SCALE mm 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) RECOMMENDED PCB LAYOUT (WITH AND WITHOUT PEGS) A DIMENSION UNITS ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 01:16:45 9 8 7 6 5 CURRENT REV DESC: REDRAWN IN NX EC NO: 610884 DRWN: TTAO03 CHK'D: JKACHLIC APPR: JKACHLIC INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2019/01/23 2019/02/01 2019/02/01 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71439 3 SALES ASSY, 1.0MM BOARD TO BOARD RECEPTACLE CONNECTOR 10.30 HIGH PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 714393000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 1 OF 2 1 A 12 11 10 9 7 8 H 5 6 4 3 2 1 H WHITE (NATURAL) MATERIAL CIRCUIT RECEPTACLE ASSY. SIZE PART NUMBER G PEGS CONTACT PLATING (SEE PLATING NOTES) PICK & PLACE CAP PACKAGING SPEC. NUMBER PACKAGING TYPE 64 71439-3164 YES 30 GOLD NO PK-70873-0693 TUBE 64 71439-3364 YES 30 GOLD YES PK-70873-0693 TUBE 64 71439-3464 YES 30 GOLD YES PK-70873-063 TAPE & REEL 64 71439-3564 NO 30 GOLD NO PK-70873-0692 TUBE 64 71439-3764 NO 30 GOLD YES PK-70873-0692 TUBE 64 71439-3864 NO 30 GOLD YES PK-70873-063 TAPE & REEL 64 71439-3264 NO 50 GOLD YES PK-70873-063 TAPE & REEL F G F RECOMMENDED PLUG/RECEPTACLE COMBINATION FOR MATED STACK HEIGHT PER EIA STANDARD 700 AAAB MATED STACK HEIGHT RECEPTACLE HEIGHT RECEPTACLE SERIES NO. PLUG HEIGHT PLUG SERIES NO. 14.00 15.00 10.30 10.30 71439-3*** 71439-3*** 3.30 4.30 71436-1*** 71436-2*** E E PLATING NOTES : D PRINTED CIRCUIT BOARD 30 GOLD - SELECTIVE GOLD (Au) IN THE CONTACT AREA; THICKNESS = 0.76 MICROMETER MINIMUM ; SELECTIVE TIN (Sn) IN THE CONTACT AREA; THICKNESS = 1.88 MICOMETER MINIMUM; NICKEL UNDERPLATE OVERALL; PLUG STACK HEIGHT + RECEPTACLE STACK HEIGHT + 0.40 (SOLDER PASTE ALLOWANCE) = MATED STACK HEIGHT PLUG CONNECTOR C D 50 GOLD - SELECTIVE GOLD (Au) IN THE CONTACT AREA; THICKNESS = 1.27 MICROMETER MINIMUM ; SELECTIVE TIN (Sn) IN THE CONTACT AREA; THICKNESS = 1.88 MICOMETER MINIMUM; NICKEL UNDERPLATE OVERALL; P BOTTOMING SURFACE C *THE PRIMARY SHIPPING CARTON WILL BE LABELED "COMPLIANT TO RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX II OF DIRECTIVE 2000/53/EC". CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH LEAD. H R B B RECEPTACLE CONNECTOR THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION P = PLUG STACK HEIGHT R = RECEPTACLE STACK HEIGHT H = MATED STACK HEIGHT A DOCUMENT STATUS 12 P1 RELEASE DATE 11 2019/02/01 10 01:16:45 9 8 SCALE mm --- GENERAL TOLERANCES (UNLESS SPECIFIED) PRINTED CIRCUIT BOARD FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 DIMENSION UNITS 7 6 ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 0.13 1 PLACE ± 0.25 0 PLACES ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: REDRAWN IN NX EC NO: 610884 DRWN: TTAO03 CHK'D: JKACHLIC APPR: JKACHLIC INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2019/01/23 2019/02/01 2019/02/01 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71439 3 SALES ASSY, 1.0MM BOARD TO BOARD RECEPTACLE CONNECTOR 10.30 HIGH PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 714393000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 2 OF 2 1 A