714390164

12 11 10 9 7 8 5 6 4 3 2 CIRCUIT DIM.A DIM.B DIM.C DIM.D SIZE A B H 0.35 ⌖ 0.20 X 1.00 5.60 ±0.20 3.66 6.10 G SEE NOTE 6 4.21 1.75 8.79 SEE NOTE 10 D X 6.60 F 5.30 20 13.90 9.00 12.40 12.22 H 30 18.90 14.00 17.40 17.22 40 23.90 19.00 22.40 22.22 50 28.90 24.00 27.40 27.22 60 33.90 29.00 32.40 32.22 64 35.90 31.00 34.40 34.22 70 38.90 34.00 37.40 37.22 G 80 43.90 39.00 42.40 42.22 84 45.90 41.00 44.40 44.22 90 48.90 44.00 47.40 47.22 100 53.90 49.00 52.40 52.22 110 58.90 54.00 57.40 57.22 F 120 63.90 59.00 62.40 62.22 +0.18 TOP OF HOUSING -0.13 TO SEATING PLANE 1.05 C SEE NOTE 5 1 E ⌀0.80 +0.26 -0.31 ⌀1.20 E B ±0.04 A 1.00 NOTES D 1. HOUSING MATERIAL: GLASS FILLED LIQUID CRYSTAL POLYMER(LCP) ; UL 94V-0; SEE SHEET 2 FOR COLOR. TERMINAL MATERIAL: PHOSPHOR BRONZE; 0.205 THICK VACUUM CAP MATERIAL: STAINLESS STEEL; 0.255 THICK. 2. CONTACT PLATING FINISH: REFER TO CHART ON SHEET 2. 3. THIS PART, WHEN MATED WITH MOLEX 1.0mm PLUG CONNECTOR SERIES 71436, CONFORMS TO MOLEX PRODUCT SPECIFICATION PS-71436-9999. REFER TO CHART ON SHEET 2 FOR MATED STACK HEIGHTS FOR THIS RECEPTACLE. 4. PACKAGING SPECIFICATIONS: REFER TO CHART ON SHEET 2. 5. PEGS ARE OPTIONAL. REFER TO CHART ON SHEET 2. 6. VACUUM PICK & PLACE CAP IS OPTIONAL. REFER TO CHART ON SHEET 2. 7. THIS PART CONFORMS TO EIA STANDARD 700 AAAB FOR 1.0mm TWO-PART CONNECTORS FOR USE WITH PARALLEL PRINTED BOARDS. 8. COPLANARITY OF SMT TAILS: 0.10mm MAXIMUM. 9. 64-CIRCUIT RECEPTACLE ASSEMBLY WITH PEGS AND VACUUM CAP SHOWN FOR ILLUSTRATION PURPOSES ONLY. 10. ASSEMBLY TO HAVE DATE CODE: XX XX 6.00 ±0.05 2.10 MINIMUM 0.60 ±0.05 ⌖ 0.08 A C B 0.60 ±0.05 ⌖ 0.08 A ⌀1.40 ±0.03 1.00 2 PLS. ⌖ 0.10 B C YEAR WEEK 6.00 ±0.05 B D B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION B C ±0.05 A 2.10 MINIMUM RECOMMENDED PCB THICKNESS: 1.00±0.10 DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2018/03/29 10 SCALE mm 4:1 CURRENT REV DESC: REDRAWN IN NX GENERAL TOLERANCES (UNLESS SPECIFIED) RECOMMENDED PCB LAYOUT (WITH AND WITHOUT PEGS) A DIMENSION UNITS ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 16:04:47 9 8 7 6 5 EC NO: 174318 DRWN: TPREMO CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2018/03/19 2018/03/29 2018/03/29 SALES ASSY, 1.0MM BOARD TO BOARD RECEPTACLE CONNECTOR 5.30 HIGH PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71439 3 714390000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A SHEET NUMBER 1 OF 2 1 A 12 11 10 9 7 8 5 6 4 3 2 1 WHITE (NATURAL) MATERIAL H H PART NUMBER CIRCUIT SIZE CONTACT PLATING SEE NOTE BELOW CHARTS PEGS PICK & PLACE CAP PACKAGING SPEC. NUMBER PACKAGING TYPE 71439-0164 64 30 GOLD YES NO PK-70873-013 TUBE 71439-0264 64 50 GOLD NO YES PK-70873-063 TAPE & REEL 71439-0364 64 30 GOLD YES YES PK-70873-014 TUBE 71439-0464 64 30 GOLD YES YES PK-70873-063 TAPE & REEL 71439-0564 64 30 GOLD NO NO PK-70873-015 TUBE 71439-0764 64 30 GOLD NO YES PK-70873-017 TUBE 71439-0864 64 30 GOLD NO YES PK-70873-063 TAPE & REEL 71439-0664 64 50 GOLD YES NO PK-70873-013 TUBE 71439-0064 64 50 GOLD NO NO PK-70873-015 TUBE G G F F BLACK MATERIAL PART NUMBER CIRCUIT SIZE CONTACT PLATING SEE NOTE BELOW CHARTS 71439-0964 64 30 GOLD & PLACE PEGS PICK CAP NO YES PACKAGING SPEC. NUMBER PACKAGING TYPE PK-70873-063 TAPE & REEL E E CONTACT PLATING : 30 GOLD - 0.76 MICROMETER MINIMUM GOLD IN CONTACT AREA AND 1.91 MICOMETER MINIMUM MATTE TIN IN SOLDER TAIL AREA. NICKEL UNDERPLATE OVER ENTIRE TERMINAL. D D 50 GOLD - 1.27 MICROMETER MINIMUM GOLD IN CONTACT AREA AND 1.91 MICROMETER MINIMUM MATTE TIN IN SOLDER TAIL AREA. NICKEL UNDERPLATE OVER ENTIRE TERMINAL. PRINTED CIRCUIT BOARD PLUG STACK HEIGHT + RECEPTACLE STACK HEIGHT + 0.40 (SOLDER PASTE ALLOWANCE) = MATED STACK HEIGHT PLUG CONNECTOR C C RECOMMENDED PLUG/RECEPTACLE COMBINATION FOR MATED STACK HEIGHT PER EIA STANDARD 700 AAAB P BOTTOMING SURFACE H R B MATED STACK HEIGHT RECEPTACLE HEIGHT RECEPTACLE SERIES NO. PLUG HEIGHT PLUG SERIES NO. 8.00 5.30 71439-0*** 2.30 71436-0*** 9.00 5.30 71439-0*** 3.30 71436-1*** 10.00 5.30 71439-0*** 4.30 71436-2*** B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION P = PLUG STACK HEIGHT R = RECEPTACLE STACK HEIGHT H = MATED STACK HEIGHT PRINTED CIRCUIT BOARD A DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/03/29 10 SCALE mm --- ANGULAR TOL ± 4 PLACES ± 3 PLACES ± 2 PLACES ± 1 PLACE ± 0 PLACES ± 0.5 ° 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 16:04:47 9 8 CURRENT REV DESC: REDRAWN IN NX GENERAL TOLERANCES (UNLESS SPECIFIED) RECEPTACLE CONNECTOR FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 DIMENSION UNITS 7 6 5 EC NO: 174318 DRWN: TPREMO CHK'D: KLANG APPR: KLANG INITIAL REVISION: DRWN: REED APPR: BIXLER THIRD ANGLE PROJECTION 4 2018/03/19 2018/03/29 2018/03/29 SALES ASSY, 1.0MM BOARD TO BOARD RECEPTACLE CONNECTOR 5.30 HIGH PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1995/04/03 1995/04/03 DRAWING SERIES C-SIZE 71439 3 714390000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A SHEET NUMBER 2 OF 2 1 A