7174-10002

12 11 10 9 8 7 5 6 X 41.00 VAC-CAP IS OPTIONAL. REFER TO TABLE 1.0 PITCH 5.14 5.60 ±0.20 24.09 1 H G 6.10 0.35 ⌖ 0.20 X 43.9 F 2 1. HOUSING MATERIAL : GLASS FILLED LIQUID CRYSTAL POLYMER (LCP); UL RATING: 94V-0; COLOR: WHITE TERMINAL MATERIAL: PHOSPHOR BRONZE VACUUM CAP MATERIAL: STAINLESS STEEL 2. COPLANARITY OF SMT TAILS: 0.10 MAX. 3. PACKAGING SPECIFICATIONS : REFER TO TABLE. 4. THIS PART, WHEN MATED WITH MOLEX U.S.PART NO. 71742-0*** OR MOLEX JAPAN PART NO. 52841-0848, CONFORMS TO MOLEX PRODUCT SPECIFICATION PS-71741-9999. 44.58 G 3 NOTES: 45.90 H 4 F 6.60 8.30 1.05 +0.18 TOP OF HOUSING -0.13 TO SEATING PLANE E E 44.40 41.00 6.00 ±0.05 Y ⌀1.40 ±0.03 0.60 ±0.05 ⌖ 0.08 Z UNPLATED 2 PLCS C 0.60 ±0.05 ⌖ 0.08 Z RECOMMENDED PCB LAYOUT RECOMMENDED PCB LAYOUT WITH PEGS B RECOMMENDED PCB THICKNESS: 1.0±0.1 mm MIN. RECOMMENDED PCB THICKNESS: 1.0±0.1 mm MIN. SYMBOLS = 0 = 0 PLATINGS: = 0 X21 - .76 MICROMETERS MINIMUM GOLD PLATE IN SELECT AREA, 1.91 MICROMETERS MINIMUM TIN PLATE IN SELECT AREA, OVER NICKEL UNDERPLATE. X71 - .25 MICROMETERS MINIMUM GOLD PLATE IN SELECT AREA, 1.02 MICROMETERS MINIMUM TIN PLATE IN SELECT AREA, OVER NICKEL UNDERPLATE. DOCUMENT STATUS 12 P1 RELEASE DATE 11 2019/02/01 10 01:16:46 C 9 8 7 6 SCALE mm 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.18 1 PLACE ± 0.33 0 PLACES ± = 0 = 0 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 D 1.00 PITCH 2.30 MIN. 6.00 ±0.05 ⌖ 0.10 Y A Z 41.00 ±0.04 1.00 PITCH 2.30 MIN. C +0.26 -0.31 PEGS ARE OPTIONAL REFER TO TABLE Z 44.40 ±0.05 D 0.80 ⌀ 1.20 ±0.03 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: REDRAWN IN NX EC NO: 610884 DRWN: TTAO03 CHK'D: JKACHLIC APPR: JKACHLIC INITIAL REVISION: DRWN: JRR APPR: CAB THIRD ANGLE PROJECTION 4 2018/12/10 2019/02/01 2019/02/01 95/08/14 95/08/14 DRAWING SERIES C-SIZE 71741 3 SALES ASSY, 1.0MM 84 CKT BTB PLUG 4.30 MM STACK HEIGHT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 717410000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 1 OF 2 1 A 12 11 10 9 7 8 5 6 4 3 2 1 H H G MATERIAL NUMBER PEGS PICK & PLACE CAP PACKAGING SPEC. NUMBER PACKAGING TYPE TERMINAL PLATING SEE SHEET 1 71741-0004 YES YES PK-70873-063 TAPE & REEL X71 71741-0003 NO YES PK-70873-063 TAPE & REEL X71 71741-0002 YES YES PK-70873-063 TAPE & REEL X21 71741-0001 YES NO PK-70873-0607 TUBE X21 G RECOMMENDED PLUG/RECEPTACLE COMBINATION FOR MATED STACK HEIGHT PER EIA STANDARD 700 AAAB F F MATED STACK HEIGHT RECEPTACLE HEIGHT RECEPTACLE SERIES NO. PLUG HEIGHT PLUG SERIES NO. 10.00 12.00 15.00 5.30 7.30 10.30 71742-0*** 71742-2*** 71742-3*** 4.30 71741-0*** E E PRINTED CIRCUIT BOARD PLUG STACK HEIGHT + RECEPTACLE STACK HEIGHT + 0.40 (SOLDER PASTE ALLOWANCE) = MATED STACK HEIGHT PLUG CONNECTOR P D D BOTTOMING SURFACE H R C RECEPTACLE CONNECTOR C P = PLUG STACK HEIGHT R = RECEPTACLE STACK HEIGHT H = MATED STACK HEIGHT PRINTED CIRCUIT BOARD B B SYMBOLS = 0 = 0 = 0 A P1 RELEASE DATE 11 2019/02/01 10 01:16:46 C 9 8 7 6 mm GENERAL TOLERANCES (UNLESS SPECIFIED) ± = 0 4 PLACES ± = 0 3 PLACES ± = 0 2 PLACES ± 0.18 1 PLACE ± 0.33 0 PLACES ± = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS = 0 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 CURRENT REV DESC: REDRAWN IN NX EC NO: 610884 DRWN: TTAO03 CHK'D: JKACHLIC APPR: JKACHLIC INITIAL REVISION: DRWN: JRR APPR: CAB THIRD ANGLE PROJECTION 4 2018/12/10 2019/02/01 2019/02/01 95/08/14 95/08/14 DRAWING SERIES C-SIZE 71741 3 SALES ASSY, 1.0MM 84 CKT BTB PLUG 4.30 MM STACK HEIGHT PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 717410000 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET SEE TABLE 2 A1 SHEET NUMBER 2 OF 2 1 A