73100-0255

PRODUCT SPECIFICATION 1.0 SCOPE This Product Specification covers the SMB product family (Interface Only) and is a general performance guideline. Please contact Molex RFMS Engineering for specific design iteration performance ratings. As customer end use applications vary greatly, the performance requirements stated within are superseded by performance requirements stated on the Molex Sales Drawing(s). 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME SMB 3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS MIL-STD-348B 4.0 RATINGS 4.1 VOLTAGE 335 Vrms at Sea Level 85 Vrms at 70,000 Feet 4.2 TEMPERATURE Rating: - 65°C TO + 165°C 4.3 FREQUENCY RATING 0 to 4.0 GHz 4.4 NOMINAL IMPEDANCE 50 or 75 Ohm (see sales drawing) REVISION: A5 ECR/ECN INFORMATION: EC No: 175913 TITLE: SHEET No. SMB PRODUCT FAMILY DOCUMENT NUMBER: PS-89675-354 1 of 4 INTERFACE ONLY DATE: 2018 / 05 / 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: S.SHAH/AZR SSS WES TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 5.0 PERFORMANCE 5.1 ELECTRICAL REQUIREMENTS ITEM DESCRIPTION 1 Insulation Resistance 2 Dielectric Withstanding Voltage TEST CONDITION REQUIREMENT MIL-PRF-39012, paragraph 3.11 >=1000 Megohms MIL-PRF-39012, paragraph 3.17 Cable group I Cable group II, IIa 750 Vrms Min 1000 Vrms Min MIL-PRF-39012, paragraph 3.16 3 Low Level Contact Resistance (LLCR) Center Contact Initial: Baseline (Reference Only) Post Environment: 10.0 Milliohms Max Increase Initial: Baseline (Reference Only) Post Environment: 10.0 Milliohms (Noble Plating) 20.0 Milliohms (Non-Noble Plating) Max Increase Outer Contact 4 Voltage Standing Wave Ratio MIL-PRF-39012, paragraph 3.14 See Sales Drawing 5 RF Insertion Loss MIL-PRF-39012, paragraph 3.27 Application specific. See Sales Drawing where applicable. 5.2 MECHANICAL REQUIREMENTS ITEM DESCRIPTION 6 Material 7 REQUIREMENT MIL-PRF-39012, paragraph 3.3 See Sales Drawing Finish MIL-PRF-39012, paragraph 3.3.1 See Sales Drawing 8 Design MIL-PRF-39012, paragraph 3.4 See Sales Drawing 9 Recommended Mating Torque 10 Force to Engage and Disengage 11 Coupling Proof Torque REVISION: A5 TEST CONDITION ECR/ECN INFORMATION: EC No: 175913 N/A MIL-PRF-39012, paragraph 3.5.1 Axial Force Radial Force MIL-PRF-39012, paragraph 3.6 PS-89675-354 N/A TITLE: SHEET No. SMB PRODUCT FAMILY 2 of 4 INTERFACE ONLY DATE: 2018 / 05 / 14 DOCUMENT NUMBER: 14.0 lbs Max. N/A CREATED / REVISED BY: CHECKED BY: APPROVED BY: S.SHAH/AZR SSS WES TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION 5.2 MECHANICAL REQUIREMENTS (continued) ITEM DESCRIPTION TEST CONDITION REQUIREMENT 12 Mating Characteristics MIL-PRF-39012, paragraph 3.7 MIL-STD-348B dimensions 13 Connector Durability MIL-PRF-39012, paragraph 3.15 14 Center Contact Retention MIL-PRF-39012, paragraph 3.12 Axial Force (Cable Connectors) Axial Force (Adapters) Axial Force (PCB Connectors) Radial Torque 15 Cable Retention MIL-PRF-39012, paragraph 3.24 Axial Force 500 Cycles 4 lbs MIN (terminated to cable) 4 lbs MIN N/A N/A Per Cable Specification 5.3 ENVIRONMENTAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQUIREMENT Test Condition B 16 Vibration MIL-PRF-39012, paragraph 3.18 Per MIL-STD-202, Method 204 Signal (Center) LLCR: 10.0 Milliohms Max Increase Post Environment Outer Conductor LLCR: 10.0 Milliohms (Noble Plating) 20.0 Milliohms (Non-Noble Plating) Max Increase Post Environment Test Condition B 17 Shock MIL-PRF-39012, paragraph 3.19 Per MIL-STD-202, Method 213 Signal (Center) LLCR: 10.0 Milliohms Max Increase Post Environment Outer Conductor LLCR: 10.0 Milliohms (Noble Plating) 20.0 Milliohms (Non-Noble Plating) Max Increase Post Environment REVISION: A5 ECR/ECN INFORMATION: EC No: 175913 TITLE: SHEET No. SMB PRODUCT FAMILY DOCUMENT NUMBER: PS-89675-354 3 of 4 INTERFACE ONLY DATE: 2018 / 05 / 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: S.SHAH/AZR SSS WES TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC PRODUCT SPECIFICATION Test Condition B 18 Shock (Thermal) MIL-PRF-39012, paragraph 3.2 Per MIL-STD-202, Method 107 Signal (Center) LLCR: 10.0 Milliohms Max Increase Post Environment Outer Conductor LLCR: 10.0 Milliohms (Noble Plating) 20.0 Milliohms (Non-Noble Plating) Max Increase Post Environment 19 Corrosion (Salt Spray) MIL-PRF-39012, paragraph 3.13 Per MIL-STD-202, Method 101 Test Condition B 20 Moisture Resistance MIL-PRF-39012, paragraph 3.21 Per MIL-STD-202, Method 106 DWV 750 Vrms (after drying) REVISION: A5 ECR/ECN INFORMATION: EC No: 175913 TITLE: SHEET No. SMB PRODUCT FAMILY DOCUMENT NUMBER: PS-89675-354 4 of 4 INTERFACE ONLY DATE: 2018 / 05 / 14 CREATED / REVISED BY: CHECKED BY: APPROVED BY: S.SHAH/AZR SSS WES TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC